An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: fixing kenwood tk-80
If you have the schematics try to follow the voltage lines with a volt meter. If this is beyond your capabilities then I would suggest taking the radio to a service center or sending the radio to Kenwood.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is no way you will be able to unlock your radio. If you are lucky and the dealer left the "Cloning" Option checked in programmation you *should* be able to clone it with your other TK-7160 with a Cloning Cable.
If this does not work, you'll need to contact Kenwood and by Serial # they will tell you who was the original dealer. Then, contact the dealer and ask for the PW or maybe they'll unlock it for you for 20$-30$.
If the dealer is not the last person who put a PW in the unit, kenwood will have to do it. (~80$-100$.)
After a lot of experimenting, I decided to try powering the Autocom with a 9v battery and that fixed the issue. Evidently, the power from the bike was dirty - I'll have to filter the power line, find a different place to tap into or remain battery powered.