Question about Tascam US-144 Sound Card

1 Answer

Low volume on tascam us-122L

Hi there my problem is:
i use cubase for recording and producing music, and when i monitor with my headphones the music sounds great, and i export it...
the volume is too low. even if the levels of the cubase channels are really high. i don't know how tu pump up the volume in the export.
what do i have to do to have that volume that professional recordings need?
please help me!!!

Posted by on

  • romulus1224 Jan 03, 2009

    I have the same problem! whenever I open the final track on something like itunes, it seems like its half the volume as everything else in my library.

    help?


  • Anonymous Mar 03, 2009

    So I am not alone. I have this problem both on my PC and on the Mac. :(
    I couldn't find the solution for this, so now I will buy a microphone preamp (Symetrix 528). My Tascam US144 has been nothing but a disappointment.
    Advice: get something better when you want to buy a sound interphase. :)

    Love and Peace,
    Queen ON

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tascam US122 I cannot record anymore... green USB light on tascam is flashing all the time very fast... why is that?

Posted on Dec 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Mic will record, but when i plug in my headphones into the the mic in the front...it still continues to record when speaking, singing into it...but i cant hear the music (instrumental) in the...


This could be due to the output volume and monitor mix are turned too low. You can fix this by adjusting the input gain levels in the ASIO settings menu.

Apr 07, 2011 | M-Audio Producer USB Microphone with...

1 Answer

No sound from the monitor or playback


check out where your monitors are receiving their audio from.is it from the tascam or the onboard or audio another interface.first choose an output for your sound,if you using the tascam as an output for your sound connect your monitors to the phones input in front and use the mono mix knob to swap between audio coming from your usb or computer.if you want to hear from your mic or guitar move knob to usb if you want to hear from computer as in playbck move it to computer.

Nov 21, 2008 | Tascam US-144 Sound Card

2 Answers

No sound in playback (but can hear click track)


This might seem simple, but just to check: you have switched off the monitor on the track when you go to playback? With track monitor engaged, you will not hear playback, but will continue to hear the live monitor.

Sep 26, 2008 | Tascam US-144 Sound Card

2 Answers

Computer freezing while using Tascam 122l


Hi

I would perhaps try to reinstall the drivers for the device, and be sure that under audio settings, you have the Tascam set as the default device. Try this and get back to me here if it still gives you problems.

regards
robotek

May 14, 2008 | Tascam US-144 Sound Card

3 Answers

Tascam us 144 sync problems with cubase le


Hey lea,

i have a similar setup (Cubase LE & Tascam 144) and each time i start up Cubase i have to make sure there is no digital input going to the tascam. once cubase is started up but no project loaded i plug in my spdif from my DAT machine and then open my project and all is fine. does that answer part of your question?

i have a different problem though, i'm trying to record my DAT tapes which are recorded at 32khz and cubase doesn't recognize that sample rate properly. it'll record no problem, and play them back fine, but exporting always creates mismatched sample rates in the exported file. sucks big time and i have got no idea on how to fix it either.

Mar 04, 2008 | Tascam US-144 Sound Card

1 Answer

Can't record in stereo


I have a tascam 144 that came with cubase. I am not able to figure out Cubase either. I am a beginner and am trying to record my yamaha electric drum set with it. so far no luck at all.

Feb 25, 2008 | Tascam US-122 USB Audio/MIDI Interface...

1 Answer

Burn CDs from Tascam US-122L


The answer is yes, but it may not work as simply as you think. You can't just save your Cubase file / mix and then send it to your recorder. You'll want to render down the song you have to one stereo .wav file and send that to burner as a wav file. (That's the quick way). Another option is to render each file you have seperately so acoustic guitar, bass, vocal, etc are all seperate tracks. So the answer is yes, a .wav file is the format for audio cds. You'll record your seperate tracks and then you'll have to mix down, render, or export them when you are done. In Cubase, use "export".

Feb 07, 2008 | Tascam US-122 USB Audio/MIDI Interface...

3 Answers

Hellp!


Are you hearing the sounds from your speakers on your computer only?...accordianman

Feb 03, 2008 | Tascam US-144 Sound Card

Not finding what you are looking for?
Tascam US-144 Sound Card Logo

Related Topics:

732 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tascam Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Ben Armstrong

Level 2 Expert

334 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Are you a Tascam Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...