Question about Acer TravelMate 2300 Notebook

Open Question

Me again... what can u suggest me about thisproblem?

Posted by on

  • ray4ctech May 11, 2010

    can you give us some more details please

  • Uwe Klopfer
    Uwe Klopfer May 11, 2010

    what exactly is the problem ?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i unfreeze my notifications on my facebook page?


Typically, the notifications area will disappear once you click on a link, the notifications symbol (looks like an earth), or click outside of the notifications box. If this is not happening, you will want to close down your browser window, open it up again, and try getting back into Facebook. If that doesn't work, I would suggest restarting your computer and try again. If that fails to help you, my last suggestion before getting a technician to help you would be to use a different browser, i.e. Google Chrome, Firefox, Opera, etc.

Hope that helped you! :)

Dec 17, 2014 | Toshiba Computers & Internet

2 Answers

Was in the middle of restoring the computer to factory settings, it was at 98% and it died now it says the windows failed to start


Hi there!
If the restoration to the factory settings did not finish then Windows was not reinstalled properly in your computer. I suggest that you reset again the computer to factory settings. If the restoration died again at any point before completion, I suggest to do a manual re-installation of Windows.
Hope this helps.

May 20, 2011 | Computers & Internet

1 Answer

Power on no boot


Ok lets try the simple stuff first:

ATX reset: sometimes the motherboard can get stuck and hang, some people blame static buildup for it personally I think its just the BIOS hangs similar to the way windows does sometimes. Resolve this by removing all sources of power such as the battery and the power lead then press the power button for 30secs do this a couple of times. Plug the power lead back in then power on.

If ATX reset doesnt work try plugging a standard monitor into the laptop then power on. If there is no display just power off.

If no results appear above try removing the hard disk, there will normally be a panel on the underside of the laptop with what looks like 3 discs laid on top of each other remove this then unscrew and remove the disc. Try to power machine again. If it powers and display is shown it would suggest a faulty drive, otherwise replace drive.

Next step would be optical drive this is usually held in place by a single screw on the underside of the machine. The screw is usually identified by a disc shape whith a segment missing. Remove the screw and carefully pull the drive out, take care not to damage the bezel of the drive at this point. The bezel is removable and should it happen to come off it can be clipped back into place provided the clips have not been damaged (hence take care). Once removed try to power machine again. Results same as for hard drive, if it powers and display is shown then the drive is faulty otherwise just replace drive.

Next step is remove the memory. Remove all power again. Discharge any static by touching something earthed (a favourite is bare metal on any plumbing). On the underside of the machine there will be a panel designated this time by a rectangle that has some lines on one of the long sides. Remove this to find the RAM this will be a small card with a row of connectors along one side that will be in a socket. The RAM is held in by clips on either side, carefully pull the clips apart and the RAM should spring up as it is usually spring loaded. There will usually be two slots for RAM if there is a card in each remove both. Plug in the machine again and press the power button. If the motherboard is healthy it will usually sound 3 short beeps stating that it recognises there is no RAM / RAM fault. If you get beeps it would suggest that one or both sticks are faulty causing the machine to misbehave. Replace one stick and attempt power. If machine starts then it would suggest the remaining stick is faulty but you could try to insert second stick again to see if you can repeat the error. If machine powers correctly with both sticks in then it would suggest some of the contacts had become corroded and reseating them has made the connections good again. If there are no beeps and is still not booting correctly then it would suggest that there is another fault with machine.

Try removing the Wi-Fi card if your machine has one check under the remaining panels for a card with 2 or 3 wires connected to it (they are usually black and grey). Remove card in the same way as you removed memory. Again try to power with card removed.

If none of the above work then I would suggest that your machine has a faulty motherboard and you will need to weigh up the economy of having it replaced against putting the money towards a new machine.

Good Luck :-)

Jan 14, 2010 | Computers & Internet

1 Answer

Problem in external speaker when connected to acer 5738Z LAPTOP


The audio jack on the laptop is for headphones and most likely cannot it cannot deliver sufficient power to drive unpowered speakers.
Check the audio jack with headphones, if the volume setting is high and you still can't get sounds from the headphone and the mute switch is not selected then the audio amp in the laptop is faulty.

Jul 07, 2009 | Acer Aspire 5920-6727 Notebook

1 Answer

My WLAN is not working


hi thanks for using fixya!

I suggest that you uninstall and install back again the driver for the WLAN and check if its going to work again properly.

If you need further assistance, let me know!

Apr 19, 2009 | HP Compaq Presario V3000T Notebook

1 Answer

Crystal eyes webcam


OK REMOVE OLD DRIVERS AND REINSTALL LATEST DRIVER.ENABLE CAM AND REBOOT DRIVERS SHOULD LOAD AND FIX THISPROBLEM.RICHARDM69

Dec 02, 2008 | Acer Aspire 5610-4648 Notebook

1 Answer

Troubleshooting IBM ThinkPad A31 monitor problem


The system is having problems with the graphics drivers, heres how to tell!!! when you first turn the machine on display is clear until it gets to windows. To resolve the problem is quite easy, just reboot into safe mode and un-install the graphics drivers, then reboot. When the system restarts is should re-install the graphics drivers automaticaly for you, job done :)

keep me informed please

regards

Nov 24, 2008 | Computers & Internet

1 Answer

Hi again


Ok you are going to have to repair windows XP

You will need a windows cd for this.

The full instructions are available for download from my website here

http://celtekusa.net/docs/Celtekusa%20Windows%20XP%20Crashed.pdf

Aug 27, 2008 | Computers & Internet

1 Answer

T20 black screen crash


This could be a problem with the memory. Try removing the memory and starting & running one chip at a time in both slots one at a time. If it turns out that the memory and slots are good, then this will be a motherboard component. Componenet problems can be tricky to track down, even for veteran professionals, so I suggest taking it in for a professional diagnosis.

Aug 03, 2008 | IBM ThinkPad T20 2647 Notebook

2 Answers

Mouse


If you want repair this it costs high. I suggest you to buy a "usb optical mouse". Just plug it in to you usb port on your laptop.
I think it better. Contact me again for any suggestion.

Thanks

Mar 29, 2008 | Acer Aspire 3680 Laptop

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...