Question about Dryers
The dryer makes a squeaky noise when the barrel spins. It still gets hot and the barrel turns, but it's making a noise like something is rubbing against something.The dryer is a GE hotpoint model nbxr453evoww
If it has not been squeaking for an extended time you can get by with just changing the rear drum sleeve bearing (WE3X75). To do this, open dryer door, remove screws going up into top, allowing top to swing up and back. Remove screw holding front panel to side panel near top just under where the top was. Tilt front panel forward and lift off bottom pegs. Swing to side (you don't have to remove wires). Pull drum forward about 6 inches. (you don't even have to remove the belt.) Change sleeve at center back of drum. Make sure to inspect the front drum support slides WE1M481dark ones and WE1M333 white ones (about 1/2 inch x 2.5 inch strips at the top of the front panel which support the front of the drum), as about the time the rear bearing goes, these may be wearing also, especially the one on the left side.
Posted on Nov 18, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 23, 2015 | GMC Cars & Trucks
Sep 08, 2011 | Miele Dryers
Here is a tip that I wrote about dryers and noises...
It will help you determine what is happening there...
Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise
Dec 29, 2010 | Amana NDE5805AY Electric Dryer
May 20, 2010 | Dryers
Jan 10, 2010 | GE Dryers
Jul 14, 2009 | Maytag Neptune MDE5500AY Electric Dryer
Jun 03, 2009 | Frigidaire Electric Dryer
Feb 14, 2009 | Hoover Nextra 160 HNWF 3137 Front Load...
Mar 20, 2018 | Dryers
571 people viewed this question
Usually answered in minutes!