Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Remote will not work at all to control volume or power for the TV, nor will the DVR remote work for the TV that normally will control the TV. Remote will change the channels on the satellite receiver so we know the remote is working and can hand control the volume and power for the TV. Is there a remote sensor or something that can go out on the television?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 65 Answers
Re: Remote will not work at all to control volume or...

Tv needs an hc board replacement or the remote sensor on this board

Posted on Dec 09, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sansui platinum plus tv

Are you using a remote control or the switches on the TV?

If using a remote;
First turn the TV off at the power point then wait for 10 seconds.
Then turn the TV back on
Then attempt top adjust the volume using the manual settings on the side or bottom of your TV, if that works then you may have a remote that either needs new batteries or does not work.?
Can you turn the TV on and Off with the remote control?
Can you change channels with the remote control?
If you can do both the above it would appear that the remote is working OK.

Does this fix the problem?


Jun 30, 2014 | Standard (CRT) Televisions

1 Answer

Sanyo DS31590 no remotes will work, will not turn on power or volume but changes channels

If you can control the TV by using its front panel controls, and only remote control is not working, the fault may be either to its remote control handset or to the remote sensor inside. The remote sensor is a small component, having only three solder terminals and will look like this. 7_12_2012_12_53_47_pm.jpg7_12_2012_12_54_01_pm.jpg
This is the component inside the TV which senses the infrared rays emitted by the remote control, and convert it to digital signals, and send to the microcomputer section circuit to process. This component can be located just behind the infrared remote window at the front panel of the TV. You have to open the TV to access it, and to replace it. Just check your remote for its infrared emission, before going further. Just get more details about how to check a remote control from this site named 'Electro-help'. Pull up older posts there. Just check this link, and locate the site named above.

Jul 12, 2012 | Sanyo DS25390 TV

1 Answer

Need codes where can i find them

To set up the volume control on your virgin remote control, to be able to change the TV volume, please follow the instructions below.

1. Using the table below find your make of TV and the code which matches it.
2. Press and hold down Volume + and mute on your remote control at the same time for at least three seconds, until the green light in the top right-hand corner of your remote control flashes twice.
3. Release the buttons and enter the first four digit code from the table below. (You must do this within ten seconds).
4. As you enter the first three digits the green light on your remote control will give a short blink.
5. As you enter the fourth digit, the green light will flash twice to confirm that the volume is set.
If setting the volume is not successful, please repeat the above steps with the second or third codes from the table below.

TV Codes
Akai 0236, 0544, 0630
Alba 0037, 0065, 0246
Amstrad 0205, 0440, 0065
Bush 0246, 0263, 0377
Decca 0064, 0100, 0544
Ferguson 0101, 0363, 0221
Fidelity 0244, 0221, 0460
Finlandia 0374, 0387, 0236
Goodmans 0065, 0064, 0100
Granada 0379, 0387, 0391
Grundig 0563, 0582, 0515
Hinari 0037, 0064, 0065
Hitachi 0253, 0384, 0377
JVC 0681, 0081, 0122
Matsui 0263, 0205, 0037
Mitsubishi 0136, 0382, 0064
NEI 0065, 0365, 0459
Nokia 0508, 0501, 0576
Panasonic 0678, 0254, 0278
Philips 0584, 0065, 0040
Saisho 0039, 0205, 0263
Samsung 0065, 0584, 0037
Sanyo 0236, 0073, 0100
Sharp 0121, 0064, 0065
Sony 0533, 0038, 0039
Tatung 0065, 0100, 0544
Thomson 0363, 0653, 0137
Toshiba 0536, 0063, 0271

If I have not listed your make of TV in the table above,
1. Press to go to the Home Screen.
2. Choose Telewest Services.
3. Choose Technical Assistance.
4. Choose TV Control Codes.
5. A full list of TV brand codes will appear.
If the volume control is still not working after trying all the codes for your TV model, or your TV model is not listed, then your TV is not compatible with our remote control and you will need to use your TV remote to control the volume as normal.
You can also use your TV remote control to adjust the volume in the normal way. Good Luck

Jul 27, 2009 | Standard (CRT) Televisions

1 Answer

I was able to program my Comcast remote to control the volume of my tv, but was unable to get it to change channels. Is there something else that I should do?

Controlling the TV power and volume is probably all you'll be able to do with that control. The Comcast remotes are meant to be used with their converter boxes, and normally people want to change channels on the box while the TV stays on the box output channel (usually 3, sometimes 4). The remote's channel up and down buttons and number keypad only send out the codes recognized by the converter box. You'll need to fall back to the TV remote if you want to control more than power and volume.

May 04, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Remote will not change the volume

Is the front funtion button works in the TV the it could be a bad remote controller(the button switch inside) :)

Apr 14, 2009 | Hitachi 43FDX01B TV

1 Answer

Comcast DVR remote won't work the volume on my Samsung tv

Have you dropped it by accident from a high height or on hard surface? Have you spilled any liquid to it?
Doesn't all the button's seems to work?
Here's a one trick if you have a mobile phone with camera:
enable camera on your mobile phone. Look for a WORKING remote control from the other electronic stuff at your house. Point your remote control to camera lenses and press any button. Do you see blinking red light on your mobile screen? Try this with your DVR's remote control and see if it works. If you are sure about the polarity of the batteries and checked that they are new enough, ther's only two solutions: buy a new remote control according to your TV set model (sometimes it's hard to find) or buy a universal remote control

Feb 14, 2009 | Jensen TS2050J 20" TV

1 Answer

Volume controls dont work when using remote

I would start by trying other codes on the universal remote. Sometimes codes will only work part of the remote such as the numbers or channels but not volume. Your motorola cable remote sounds like it may only need a good cleaning. sometimes when you take remotes apart it will look like somthing got spilt in it. I would start there first.

Mar 17, 2008 | Sanyo DS27910 27" TV

2 Answers

Wharfedale LCD3210AF Television- Digital problems!

Well there is still a problem with the TV. I found that by unplugging the power cable that the digital channels worked. But, when I turned the TV on today the problem had returned, I had to take out the power cable again!

Feb 11, 2008 | Standard (CRT) Televisions

2 Answers

Need setup codes for Akai KC01-B2 to run with comcast remote

I have an Akai 42"lct & had the same problem. I bought an universal remote URC R6 at walmart for $19. I can now control the tv, u-vrerse cable, panasonic surround system & still have the aux open. You must use the "learn" method but I can control channels, volume, record, menues for all devices as well as setup, record for dvr & more. I hope this helps.........

Jan 29, 2008 | Akai CF2791 27" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66476 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides