Question about Lands Phones

1 Answer

New ge dect 6.0 phone receives calls but won't ring out loud

We have the phones set to ring but neither one will - they just light up

Posted by on

  • 5 more comments 
  • Anonymous Dec 03, 2008

    We suddenly have the same problem. We have had this phone for about 2 years and all of a sudden the handsets won't ring. Does anyone have a solution?

  • cardinalbean Dec 06, 2008

    Same problem!

  • Anonymous Dec 11, 2008

    same problem. Arg. I tried adjusting the ringer volume through the phone--it's set on high.

  • Anonymous Dec 19, 2008

    I'm having the same problem.

  • taz7667 Jan 10, 2009

    We have only had our phone for two weeks and it is doing the same thing. It won't ring in but you can call out and you can call in but the ringer stopped working. It is turned on and the volume is set to high.

  • sarahsull Jan 11, 2009

    Same problem here...anyone know how to fix it?

  • Anonymous Feb 01, 2009

    same problem. this phone can lick my balls.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem and it persisted for a few days. Once i sat down and found the manual at ge's home electronics website, the problem was resolved. This is a little embarasing because it's quite an easy fix. my phone handset was displaying a musical note with a line through it. This is to show that the "Do Not Disturb" function is enabled. There is an illuminated button on the base that says do not disturbe.... i hit the button and the ringer works again. If you had the same problem, you are not alone my friend. Time to double our ginko intake for the day. *laugh*

Posted on Feb 17, 2009

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Our ringer on our cordless won't ring.

hit the # button

Posted on Apr 17, 2009

  • 2 Answers

SOURCE: I have a GE model 28213 DECT 6.0 home phone that I

I have a GE model 28112EE2-A DECT 6.0 with a similiar problem. I have had it for over a year and sometimes it won't ring but it flashes. What I did was unplugged the power for about 20 seconds and plugged it back in. Then it was fine. Hope that helps.

Posted on Mar 08, 2009

  • 1 Answer

SOURCE: GE DECT 6.0 GHZ cordless fone (model 28111) don't ring

There is a Do Not Disturb button on the base unit. Press it to turn the feature on and off.

Posted on Jul 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Uniden user guide


Select the model of your Uniden DECT 6.0 system from the list beginning at http://www.uniden.com/scat/dectphones_mnl to download a copy of the manual.

Aug 23, 2014 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

My nokia e73 stopped alerting me when I get a text. the light will flash when I get a text but there is no sound. My cell rings when people call, I made sure that in settings>tones my message alert is...


for it to make noise try deleting all of ur mesages from ur inbox and out box. For the blinking to blink longer gp to ctrl panel-settings-general-personalization-notification lights-notification light-blink for-select no limit

Jun 25, 2011 | Nokia E73 Mode Cell Phone

1 Answer

How Do I for some of my lines only to ring on certain phones? I dont want the rest of my phones to ring.


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Central telephone Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Sep 30, 2010 | Lucent PARTNER18 Corded Phone

1 Answer

How do I turn off the ringer for the fax line?


I'm guessing that the fax line also appears on the telephone sets and rings on them.
Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Central telephone Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Aug 24, 2010 | Lucent PARTNER18 Corded Phone

1 Answer

How do I increase the rings before message answers?


Setting the Number of Rings (Excerpt from the Uniden Dect 1580 Phone manual

The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS) setting, the answering system picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can hang up after the third ring to avoid long distance billing charges.

  1. Press Menu/Select.
  2. Select the Ans. Setup menu, and then the Ring Time submenu.
  3. Move the cursor to select a ring time (Toll Saver, 2 Times, 4 Times, or 6 Times).
  4. Press Menu/Select. You will hear a confirmation tone.
thanks

Jul 01, 2010 | GE 28112EE2 Cordless Phone

1 Answer

Would like to increase number of rings before answering machine comes on.


Setting the Number of Rings (Excerpt from the Uniden Dect 1580 Phone manual

The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS) setting, the answering system picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can hang up after the third ring to avoid long distance billing charges.
  1. Press Menu/Select.
  2. Select the Ans. Setup menu, and then the Ring Time submenu.
  3. Move the cursor to select a ring time (Toll Saver, 2 Times, 4 Times, or 6 Times).
  4. Press Menu/Select. You will hear a confirmation tone.

Feb 02, 2010 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

How do I set phone to ring at my extention?


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist’s extension to Immediate Ring and the lines at the users’ extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users’ extensions -with the receptionist providing backup -set the line at the users’ extensions to Immediate Ring. Then set the line (or lines) at the receptionist’s extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist’s extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Dec 01, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

Ring options


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming2.gif

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Sep 26, 2009 | Lucent PARTNER18 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

1,286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

5528 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...