Question about HP TouchSmart IQ770 PC Desktop

1 Answer

Web cAM CAN'T GET THE WEB CAM TO WORK

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Greetings, 
This is a common issue experienced by those who have upgraded to Vista SP1; there is an update (patch) available upon the manufacturers website which should resolve the issue. 

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Dell 530 S Dell Inspiron. Its Webcam has stopped working. Any solutions


The very first step is of course to check your web cam connection. Most web cams use the USB port to connect to the PC, so check if your USB cable is properly plugged. For build-in web cams this steps does of course not apply. Many new laptops have a build-in web cam. Also try connecting your web cam directly to your PC instead of through a USB hub (if you are using one).

The next thing is to do is to check your Windows Device Manager and see if the hardware is recognized and installed properly.

It might be that the hardware is recognized as a camera, but the right drivers are not installed. The yellow explanation mark will indicate a problem.
Other devices in Windows XP device manager

If the device is not recognized in Windows XP, Right-click the device, and in the pop up menu select Update Driver Software. Then follow the instructions on screen, but make sure you allow Windows to search the web for updated drivers.

In case no driver for the web cam can be found, you can try a third party driver finding program that scans your PC for installed hardware and allows you to install missing drivers.

If this fails, the next step would be to un install the software that came with your web cam. Use the Add or Remove Programs feature in the Control Panel. If that does not work you can use a third party un installer.

After un installing the software, restart your PC and then reinstall the web cam software. In most cases this will solve the problems. Depending on the software, you might need to unplug your web cam during the software installation.If your problem is not fixed then you have to buy a new one.

Hope the above information will be helpful to you.
Thanks.

Oct 08, 2010 | Dell Inspiron 530 Desktop Computer

1 Answer

My mron pc cam is not working


If your Cam not working -
-check your Cam properly connect to the your PC.
-Install web cam drivers.
If don't have web cam drivers open this LINK..

http://www.soft32.com/s/Windows/Drivers/Digital_Camera_and_Webcam/3-375-0-0.html

Apr 21, 2010 | PC Desktops

1 Answer

Can see other web cams but others can not see my


hello,
first of all, check if the web cam has a button on top of it, if it does, that is the switch to turn it on.

or you check if the connector to the system is properly plugged, if not plug properly and restart your system.

Jan 02, 2010 | PC Desktops

1 Answer

Driver web cam doesnt work


Please check if the web cam driver is compatible & supports the Operating Systems (OS) installed in your motherboard computer, otherwise get its updated driver CD or thru internet download. regards

May 17, 2009 | PC Desktops

1 Answer

My web cam does not work when I go to youcam it doesnt recognize or the camera doesnt work. But online the notice I have a camer but it doesnt work


Hi,
Did you have software installed to use the WebCam? You need software to run the WebCam. Install the web cam software in your PC. Look in your program folder to locate webcam software. Then you access the web cam through this software. Your problem must be solved.

Thanks

Apr 12, 2009 | PC Desktops

1 Answer

Webcam driver stops working during regular PC operation.


If the Web cam was Generic, or even Brand name, and it came with a Drivers disc (this would mean that it is not plug and play), try completely uninstalling the Driver software for the web cam. After the uninstall has finished, reinstall the drivers, taking extra care to follow ALL on screen instructions to the T. If at some point there were other web cams, and the drivers that belonged to those cams installed on the computer, be sure to fully uninstall all of them. Only use the cam and the drivers that you are attempting to install. After all of that, the cam should work just fine.

If for some reason the cam does not work after reinstalling the drivers, try a different brand of web cam. The computer that the drivers are attempting to operate on may not be adequate to support those drivers. If that's the case, try a generic, cheaper web cam as I said.

Also: While powering up the cam, don't run anything unnecessary.

Hope this helps.

Nov 22, 2008 | PC Desktops

1 Answer

My son and i both have logitech web cams i can see and hear him he can see me but cant hear me who has the problem and how do we fix?


Problems with your son's web cams

Try to reinstall the web cam driver in the son's computer

If it's not working check another web cam with your son's computer

Aug 04, 2008 | PC Desktops

1 Answer

How do you get the 1.3 megapixel web cam to work


If you bought a new 1.3 mega web cam with that a driver cd is available. If you have the driver cd install it first. here is install steps.
  1. unplug the web cam if you connected to the system
  2. Put the web cam driver cd into the cd drive and install the driver software.
  3. In the installation it will ask you to connect the web cam to the system and connect it (Only it ask to connect)
  4. After that you can see the image on the web cam software.
  5. Adjust the lens which is comfortable to see.
These are intial steps to work the web cam just try it and inform me if you get any other thing

Apr 28, 2008 | PC Desktops

1 Answer

How do i use the built in web cam to chat with


if you have installed the driver for your web-cam.
  • then just click on web-icon in your messanger, it will automatcally open your web-cam.
Other wise install a proper driver for your web cam then it will work.

Thanks
Iqbal

Apr 26, 2008 | PC Desktops

1 Answer

My web cam


write out the make and model of the web cam, go to the site of the maker and search for the device driver, if you can't find,request from the nake the device driver and install it. it will make your cam work.


UZOWUANYA
e-mail: uzowuanya@yahoo.ca

Feb 10, 2008 | PC Desktops

Not finding what you are looking for?
HP TouchSmart IQ770 PC Desktop Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Desktops Experts

Fred Sops

Level 2 Expert

271 Answers

john smith

Level 2 Expert

366 Answers

Gavindu Dileepa

Level 1 Expert

10 Answers

Are you a HP PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...