Question about D-Link DIR-625 (790069292637) Wireless Router

1 Answer

Cant connect cable modem

Just switched from a modem using the telophone line to a cable modem and now I cannot access the internet when I have the internet going into the router and the router into the desktop.

THanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,124 Answers

If you have phone (DSL_ the phone must be connected to the modem of DSL, then connect the ethernet cable from the modem to the wireless router or router (use the jack WAN) and then from the modem (connect the cable into port # 1) goes to your PC into your ethernet card.

You have to access to your router and set your network (you have to put the data of your internet connection gave to you by your internet provider (usually is your email address and your pass)

You can get more help here:

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx


If you have a wireless network Then do this:

Setting wireless network on Win XP
Click your Start Button
Select and click Control Panel
Select Network Connections
Select Wireless Network Connections
Right click
Select View Available Wireless Networks
5. Highlight the network you want to connect to
Click Advanced
6. Select the wireless network tab
7. Highlight the network in the available networks window
9. Click configure
9. IN the Properties Window
Double check the SSID (network name)
Enter the WEP KEY provided to you by the office
Click OK

Posted on Nov 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an at&t 2wire 2701hg-b but i dont have at&t internet i have charter and i am not able to figure out how to get my internet to work with this router please help


att 2 wire is a Adsl Modem (Requires a telephone line jack to get the signals) but charter communication is a cable internet service (not DSL) , Requires a TV cable service for internet .
These two jacks differs and there working differs ..
Means : Att works with the username and password type of authentication but charter requires the MAC address of modem for authentication .
Therefore for a cable internet 2wire 2701hg-b modem cant be used . But yes in case charters has username and password authentication and works with the telephone jack in house then its possible to use the same modem.

Aug 19, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

Am i being thick? does each provider have their own type of router?? im trying to connect a d-link 615 using virgin, help please? havent got the disc for router and cant access 192.168.01 to download...


You need to connect your D-Link to a DSL or Cable modem. The ISP usually provides this modem and the configuration settings for the modem so you can connect to the Internet. To test your Internet connection connect a LAN cable from your computer to the modem and then open a browser. If you can coinnect to the Internet then you can then connect the D-Link to the modem and configure the D-Link for wireless settings so you can connect your computer/laptop to the Internet using a wireless connection.

Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Aug 06, 2011 | Routers

1 Answer

Using WRTS4GS2 Cisco Router and could not access the internet. Remobed router and had instant access to the internet.


Contact your ISP. Some ISPs limit the number of computers that can simultaneously connect to your cable-modem. If you change computers, you have to tell your ISP.

Or, power-off your cable-modem, to "reset" it.
Connect the Cisco Router to the cable-modem.
Power-on your cable-modem.
Power-on your router.
Connect your computer to your router, and see if you get Internet access.

Dec 20, 2010 | Routers

1 Answer

Cant connect to internet


Configuring router for Cable Internet (LINKSYS)

To configure your router for Cable you will need to set your router's WAN (INTERNET) port to 'Dynamic IP' (DHCP) option. The router is set to this option by default.

Configuration Steps:

Step 1
Connect the cable modem to the WAN (INTERNET) port of your router. If the modem has USB connection make sure that it is NOT connected to any computers via the USB cable and that the modem is switched to Ethernet (not USB). Only the modem's Ethernet port should be connected to the router's WAN (INTERNET) port.
Connect your computer(s) to the router's LAN port(s) or establish connection to it wirelessly.

Step 2
Open your Internet Explorer and log into your router by typing in its IP address (in most cases the default IP is http://192.168.1.1 ). Note that you do not have to be on the Internet in order to access this address because you are just connecting to your router's address. Specify username and password for your router, default is `admin' for password and username is blank (nothing).

Step 3
After logging into the router select Setup. Set Internet Connection Type to 'Automatic Configuration (DHCP)' option. Under Setup, click on MAC Address Clone tab. Enable it and click on "Clone My PC's MAC". Do this from the computer which the cable modem was directly connected the last time. This will place the MAC address of your computer into the router. Save settings and reboot the router.
Step 4

Click on SAVE SETTINGS and then on REBOOT THE DEVICE including the cable modem to apply the new configuration.

If you are having difficulties accessing the Internet, you need to:

- Log into the router and go to Status page. Note what IP address it is getting on the WAN (INTERNET) interface. If the IP address you see under WAN (INTERNET) appears to be in the same range you are using on your network (e.g. 192.168.1.x), you will need to change the range you are using on your LAN to something different, e.g. 192.168.88.1. You can do this on your router under Setup > Basic Setup. Note that after changing the IP of your router you will only be able to access it through its new IP, e.g. 192.168.88.1.

- Uninstall your antivirus/firewall software (sometimes disabling or closing the software is not enough) and reboot your PC. After establishing the Internet connection through the router, reinstall your antivirus/firewall software.


Sep 02, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

I cant connect to two computers at the same time


How to connect....

1- Two Computers:

# We are connect two computers together to share Internet, printer, scanner, files, and even programs

We can do it through either way:

1- Use A Crossover Cable And Two Network Cards.Two network cards are installed in two computers.Then use crossover cable to connect them.

2- Use a Phone Line and Two Special Adapters Sold as "Phone line network Kit". Two adapters are installed in two computers. Then use existing Phone line to connect them.

Connecting Two Computers Wirelessly:

1- Wi-Fi
2- Bluetooth
3- Infrared


Several types of fixtures exist for home networking:

1- Hubs
2- Switches
3- Routers


2- Computer with the internet

Before you can connect to the Internet and access the World Wide Web, you need to have certain equipment. In brief, you must have:

-A computer (preferably running an up-to-date operating system); -
-A modem and access to a telephone line or a local area network (LAN) that is in turn connected to the Internet; and connection software that will allow you to establish an account with a service provider and access the Internet


You Need:

Modem: This converts your digital computer information into analogue telephone signals. Phone Line: his may be your biggest expense after the equipment.

Internet Service Provider (ISP): ISP has a permanent connection to the Internet.

ADSL: a newly standardized transmission technology facilitating simultaneous use of normal telephone services, data transmission of 6 Mbit/s in the downstream and Basic-rate Access (BRA).

ADSL facilitates the simultaneous use of normal telephone services, ISDN, and high speed data transmission.

Another advantage of having an ADSL line is not missing calls while you're online, as both voice and data can be transferred at the same time.

Jun 19, 2009 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

DIR-300 router and broadband ISP connection,is NAT possible?


With a cable broadband connection, the cable line comes into the cable modem. The cable modem does the work changing the cable signal to a network connection and sends an I.P. address to the computer. With some cable internet providers you can hook the network cable into the in port on a router, wireless or wired, then hook up computers to the router. At this point the router gets the IP from cable and uses it's own IP routing for your internal network. Some broadband providers control your access by the computers mac address which registers with the vendor. If this is the case then the easy way to make it work is to get a router which can clone a mac address so the vendor still sees the same mac address.

May 24, 2009 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

Unable to connect internet


hi,

theres a possiblity that the modem is set to bridge mode,in that way,you will not be able to connect to the internet direclty to the modem,192.168.1.1 is usually the deault gatewayy address for almost all verizon modem and username is admin and password is admin as well,if admin didnt take for the password,try using password as the password


thanks and God Bless

Dec 10, 2008 | Toshiba WRC 1000 Wireless...

1 Answer

Wireless router says its working laptop says no its not


Your sister was accessing the wireless access point at school which is connected to the Internet/WEB access via a router and the school's broadband service provider.
For you to access the Internet using your wireless adapter on your laptop, you need your own wireless access point and connect it to a broadband ADSL or cable modem and then connect it to an Internet Service Provider. Some Internet Service Providers (cable and ADSL) can supply a combined modem/router/wireless Access point.
If you already have a broadband modem all you need is a wireless access point/router. You only need to configure the wireless access point and your wireless adapter so they will communicate with each other. Folow the instructions in the manuals.

Dec 07, 2008 | NetGear WGR614 Wireless Router

1 Answer

Modem connects to Internet, but PC can't


Are you using a firewall? Did you tell the firewall that the browser has permission to access the internet (go beyond the local network of the modem)?

Cindy Wells

Jul 29, 2008 | Paradyne 6211 ADSL2+ Router (6211I1200)

1 Answer

Can't Connect to Internet


there is a need to reconfigure your router to work with your modem. If configured already before, then there is great chance that this has been set back to factory default.

Oct 06, 2007 | U.S. Robotics USRobotics USR5461 Wireless...

Not finding what you are looking for?
D-Link DIR-625 (790069292637) Wireless Router Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...