- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I dont think so. The g25 is gear driven and has always been cited for its loud noises. It seems odd that it doesnt make as much noise going to the right, but i can assure you that the one i had was a noisy wheel. Other than that they are great. Fanatec makes a comparible wheel that is belt driven and not noisy at all but i doubt you are looking for new after just purchasing one :)
If this happen when you plug the G25 into a usb and power supply this is normal behavior, it recalibrate itself. This should happen for maximum 15/20 seconds.
If the G25 keeps turning round itself after, then you should contact Logitech support for a replacement, this is an hardware failure that is covered by the warranty.
Thanks and have a nice day Julien
i have a g25 wheel on my ps3 it is simply plug and play.
if you struggle with buttons check this out it has all the functions: Buttons for the G25 wheel and PS3 Top 4 The Black ones Top-triangle-cancel-reverse(gear to back car up) Left-square-cancel Right-circle-E_brake Bottom-X-enter You can also use the gas pedal for enter Bottom 4 buttons The Red ones Far left-no function Second button-Change view Third button-Pause-quick exit replay at the end of race-This button will also speed up the winnings (to keep from waiting with the cup spinning around so you can get back to racing) Fourth button-best race line for license test Buttons on wheel Left-look back (default) Right-nitro (default) I change these two buttons around myself so I have the nitro on the left. D-pad-same as the controller up,down,left,right. For menue use. Also for (during race) Look back-bottom pad Look left-left pad Look right-right pad To change any of the button functions use the DFP settings in the options menue. I have not used the wheel in photo mode. The only thing you can't do with the wheel is "exit" game. I also never have my controller on during gameplay I only turn it on to exit the game. If anyone needs anymore help with this wheel give me a shout-back and I'll try my best to help. One last thing make sure your wheel is in the far left port(port 1) or port 3
to chk the sensor on the calibration unplug the wheel from the usb port and plug back in if the wheel turns left then right and centers the sensor is fine. go to the control panel>game controller>properties and test the wheel if everything is working there it is a problem with the game. look for a profiler or calibration utility in the game itself to bring back to center.
Hi Guys, I have found your solution. If all the buttons work, but the
steering does not, it's because the buttons are powered by the USB
bus. The electric engine of the wheel need really juice from the power
supply. I have just bought a G25 and all the buttons worked fine, but
turning the wheel was completely undetected. The power supply was cold
as a supermodel heart. I have just put a new power supply and now all
the things work perfectly. By the way, my thanks to all the other guys
that posted the G25 issues, it really helped me out.