Question about Frigidaire GLTF2940ES Front Load Washer

1 Answer

Front loader locks, but nothing else. Please help!

I have had the front loader for about 4 years. About 4 months ago it stopped working completely. Had the computer board replaced and drain clogged.

This weekend I was doing laundry. First 3 loads no issue. Last load (maybe too many towels?) it stopped on 1 minute and would not finish cycle. Finally got the washer to stop and open, but it does not work anymore. I turn it on, the door locks and it acts like it will work. A little bit of water comes out (or none at all depending on the cycle) but will not turn or wash. The timer on the machine will run down.
Should I just scrap the stupid thing, or pay for another repair man??

Please help! I have a pile of baby clothes that need to be washed! :)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Ck to see if water still in tub if so remove as much as possible then remove bottom cover and clean pump..if you are washing baby clothes use mesh laundry bag for small items such as socks they tend to plug up pumps easily

Posted on Nov 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our samsung j845 front loader wont drain we have pulled every hose off and flushed them all out we have drained it and still nothing everything still sounds as if its working properly but it just wont...


I have a Samsung J845 front loader washing machine, A few weeks ago, no water would go into the machine, so replaced the broken solenoid. Now the water never stops going into the machine ??? The solenoid is working but not getting electrically turned off. When I pull the terminal from the solenoid the water stops. What has gone wrong now???

Jun 04, 2010 | Washing Machines

1 Answer

Whirlpool front loader not working - Control Lock Light On


Press the End of Cycle Signal for 3 seconds until the Control Locked light turns off.

Apr 05, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

2005 nissan frontier 4wd will not lock in


might be your auto locking hubs if you have them .... if not could be an inner passenger wheel hub prob... pull the front right wheel and then poull out your hub and check for damage

Jan 28, 2009 | 2005 Nissan Frontier

2 Answers

Controls locked on front loader washer. please help


Press far right button ('with a lock picture) for 3 seconds, the lock will come off.

Sep 15, 2008 | Whirlpool GHW9150 Front Load Washer

1 Answer

Front loader problems


call repair before warranty runs out...possible door switch if it's a loud humming noise ..try pressing in on door latch side to see it hum changes

Sep 06, 2008 | Frigidaire GLTF2940ES Front Load Washer

2 Answers

Bosch WFMC2100UC Washer stops in mid-cycle


Hi, it seems its about time to replace the motor carbon brushes.
Thanks

Aug 31, 2008 | Bosch WFMC2100UC Nexxt Essence Washer

1 Answer

APPEARANCE OF SCUM


Hey there...

The only thing that can cause this is the filter is blocked, or its needed of a service....
Its not that big a deal but its something in all front and top loaders, it needs a good service at least once a year...

Hope this helps you.

Wouter...

Jun 12, 2008 | Indesit WA 115 Front Load Washer

1 Answer

Washer stopped during cycle


cleanlaundry If your washer is less then a year old do nothing and call the manufacturer ASAP. It is under warranty for one year. Gendos...post back

Mar 17, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...