Question about Microsoft Windows Vista Ultimate Edition

1 Answer

Windows explorer I have 3 partition in my system, but in d:/ drive a lot of folder but one folder has huse data when i click that folder window explorer is not responding error message will display then everything will close, on the other hand i can open other folders, what might be the problem

Posted by on

  • Anonymous Dec 05, 2008

    I am facing same problem

  • Tim Babcock
    Tim Babcock May 11, 2010

    Is each partition formatted using NTFS?



×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

Hi,

Bring up the Start Menu, click on Run. Type Command and hit Enter.

In this command windows type

chkdsk /f /x d:

This will run a disk integrity check of this partition and see if there aren't crosslinked file entries, which has a 50 50 chance of being your problem.

Restart when done and see if this is resolved.

If it isn't comment back to this thread and we'll take it to the next step.

Regards,
Worlvet

Posted on Nov 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NEED TO KNOW HOW I CAN PREVENT BACKUP FILES FROM GOING INTO MY RECOVERY(D), AND FILLING IT UP. I AM RECEIVING MESSAGE THAT I HAVE LOW DISK SPACE IN RECOVERY DISK. HOW DO I FREE UP THIS SPACE, AND HOW


Are you sure the files are going in there? Many times the manufacturers only allocate the size that they need partitioned on that drive. I have seen many cases where that drive is full from factory and people always get that message.

  1. Click Start c01508537.gif and right-click Computer .
  2. Select Properties .
  3. Click System Protection from the left side of the Window.
  4. In the section "Automatic restore points", remove the selection next to the D: drive, and then click OK . If the D: drive was not selected, close this window. Figure 3: System Protection tab with D: drive unselected
    c01556005.jpg
  5. Right-click Start Explore All Users .
  6. Before you can remove the backup files and folders, you need to be able to view hidden system files as follows:
    1. From the explorer window press the Alt key on the keyboard to make the menu bar appear in the window.
    2. From the file menu, click Tools , and then select Folder Options .
    3. Select the View tab.
    4. Select Show hidden files and folders , remove the selection from Hide protected operating system files and then click OK .
  7. From the Folder Options window in explorer, double-click Recovery (D:) .
  8. If a Window opens stating "You don't currently have permission to access this folder" opens. Click Continue .
  9. If you previously copied or created any files into Recovery (D:) and you want to keep them, copy them to another drive - such as the C: drive.
  10. Find and delete any files that you previously copied onto the Recovery (D:) drive.
    CAUTION:Do not delete any files that are associated to recovery! Do not delete the items RECOVERY, $RECYCLE.BIN, boot, hp, PC-Doctor, pcdr, or PRELOAD! Doing so can prevent a future system recovery from the hard drive. If you are not sure, do not delete the file.
    Press Shift + Delete to permanently remove the files.
    To delete files created from MS Backup (MS Backup files are not recovery files), find and delete the folder with the same name as the computer name in the Recovery (D:) partition. For example if the computer name is BOB-PC, the folder containing the backup files would be named BOB-PC and would be deleted.
  11. Several confirmation windows open. Click Continue , and Yes until the folder is deleted.
  12. To set Windows Folder Options back to their original setting as follows:
    1. From the explorer window press Alt to view the file menu.
    2. Click Tools , and then select Folder Options .
    3. Select do not show hidden files and folders and select Hide protected operating system files .
    4. Click OK .
  13. Close explorer. The Out of Disk Space errors should no longer appear. If you would like to use the Microsoft Backup Tool again, open it and select a different external backup device to store the backup files on.

Aug 17, 2012 | HEWLETT-PACKARD Computers & Internet

Tip

How to Reduce Spreading of Virus on the Hard Drive


<b><u>An insight in VIRUS INFECTION and VIRUS SPREADING</u></b><br /> <br /> In today's computing spreading of virus is fast and very common.<br /> Even with an up to dated antivirus software the spreading of the virus infection is fast.<br /> This is because, we are not aware of how the virus spreads in our system.<br /> Once we know how the virus infects and spreads in our system then we will definitely reduce the risk, time and money spent.<br /> <br /> <b><u>Here is a short insight about viruses:</u></b><br /> <br /> 1) Virus is a small program code enabling it to to mingle or merge with other program codes.<br /> <br /> 2) The Virus Program Code is written such that it deletes data, corrupts data, steals data send it to the maker of the code, etc.<br /> <br /> 3) The virus cannot run on its own. It has to be executed just like other exe program files. That is why the autorun.inf file is required.<br /> <br /> <b><u>Now for an insight how we get infected:</u></b><br /> <br /> 1) Thorugh the internet: Usually when we browse any web site files are downloaded from the web server to our temporary internet folder(in windows) Then our Browser software reads the files and executes them in the browser window for us to view the web site.( If you are a website Designer you would understand this for others get an insight how internet browsers work), So when we are in the internet Virus files attach themself to the downloading files and enter our system in the temporary folder, From here they are executed by our browser software or when any program accesses the temporary folder.<br /> <br /> 2) Another one is we download a lot of data from the internet, we should be careful on what we are downloading because if the data downloaded is infected with virus then we are downloading the virus to our system along with the data, Don't download the data unless you are sure you could trust the maker of the data, program,etc.<br /> <br /> 3) From other medias like Flash Drive, CD's, DVD,s,etc.:<br /> We copy a lot of data to our computer from our friends and relatives, so if the data is already infected with virus we copy the virus to our system also, when we run os use the data the virus is executed along with it.<br /> <br /> <b><u>Now for an insight how Virus Spreads:</u></b><br /> <b></b> <br /> Just like any other program code the virus code has to be executed.<br /> That is why the virus merges with other exe's which are executable and not with the data file.<br /> <br /> For eg: a file with .avi, .dat, .3gp, etc. all these files are data files they dont execute, but they are used by exe files like wmplayer.exe, winamp.exe, vlplayer.exe, etc. The .avi .dat .3gp files are data files, the wmplayer.exe, winamp.exe vlplayer.exe are program files. Thus mostly exe program file get infected with virus.<br /> <br /> Usually when our system gets infected and any antivirus program cleans our system you can notice that the windows media player or winamp player or vlc media player does'nt work because it is removed or deleted by the antivirus for virus infection but the songs or video you saved is unharmed in the harddisk.<br /> <br /> That is why the virus code hangs or merges or infects mostly exe program files, So that it is executed along with the program file.<br /> <br /> So when you run an infected windows media player to play a song the virus code is also run along with the windows media player. Thus the virus is run again and again.<br /> <br /> There are hundreds of program files in the os for doing various tasks.<br /> we are going to look into just one program which the virus uses to spread itself in our system.<br /> <br /> The Program is non other than explorer.exe in windows. This program is needed to view or browse the data files stored in the hard disk.<br /> When we double click the My Computer Icon on the desktop the explorer.exe is executed which show you a window on your screen with the hard disk drives and cd dvd drives in the windows Now you can imagine how frequently you use the explorer.exe. You use it to view any data on the computer, even our desktop uses explorer.exe. This program is executed right when windows logs us on.<br /> <br /> When this program file is infected, it keeps on executing the virus each time we use the program. by this method the virus spreads fast to every parts of the hard disk.<br /> <br /> Likely there is a method to avoid executing the virus along with the explorer.exe each time we use it.<br /> <br /> When we double click any icon or object on our windows screen we execute the default command in the right click menu. Usually it is the Run Command. for eg: when you double click word the word.exe runs, similarly when we double click the my computer icon the default right menu option is <b>Open</b> which run the explorer.exe program.<br /> <br /> Instead of using this method to view files and data in our system we could use an alternate method which is using the explorer menu option when we right click my computer or right click the windows start button or in fact the explorer option is there whenever you right click any object on the screen.<br /> <br /> By using this explorer option in the right click you get a window with two panes one to the left and one to the right. In the left pane you have the directory structure showing all the directories and folders in our hard disk and in the right pane the content of the directory or folder selected in the left pane.<br /> <br /> Thus in this process we dont execute any code or program command when viewing the data in our hard disk. because we do not execute the explorer.exe more than once.<br /> <br /> So, Imagine how we reduce the spreading of virus by using this method.<br /> <br /> Say you have a file saved in your hard disk in this location<br /> <br /> <b>C:\data\monday\20-11-2010\office\media\todaysjob.doc</b><br /> <br /> If you want to open the file with word we will double click my computer, then double click C Drive, then Double Click data folder,then double click monday folder, then double click 20-11-2010 folder, then double click till you come to the media folder then you double click the todaysjob.doc which will execute the word.exe program which reads the data in the todaysjob.doc file and displays the content as required. In this process see how many time you will execute the virus, You will run the virus Seven Times.<br /> <br /> In our Alternate method You will run the Explorer.exe only once, Then on you just navigate to the media folder then double click the todaysjob.doc file in the right panel. So you execute the virus only once. <br /> <br /> Hence you reduce the spreading of VIRUS to a great extend.<br /> <br /> Good Luck, If there are any mistake please bare with me, I am not a good writer. If you have any Question Keep Me Posted.

on Oct 21, 2010 | Microsoft Windows XP Professional

3 Answers

I have 16Gb imation flash disk and i deleted the icon that allow me to enter the secure partition so i can not access this secured partition what can i do


Hi there,
If it shows up in 'my computer' as a drive letter(like E: drive) but you can't access it,you can recover deleted partition with data recovery software.I have succeed with Tenorshare. It can recover data after deeply scanning your flash drive to look for lost data.You can get it here: http://www.any-data-recovery.com/index.htm
Download it and scan your hard drive for free to check out whether the deleted partition can be recovered.After you recover your data,you can format it to check out whether it can be fixed.
If it fails, you will have to go to a recovery office where supply data recovery service but let's hope not because it will cost you a lot of money and whether they can recover data is not guaranteed.
This article may help.How to Recover Deleted Partition in Windows by Yourself Easily!?

May 31, 2011 | Computers & Internet

1 Answer

How can i remove microsoft windows 2000 form a dual boot system


Just start windows XP. Open Explorer go to menu: Tools - Folder Options Select : View Tab Select : Show hidden files and folders Click OK In explorer select C;\ Look for file : boot.ini Open boot.ini for editing (double click) CAREFULLY remove the line which looks like : multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" Close notepad, select SAVE Reboot You will not have the option to start windows 2000 anymore. On your desktop right click: My Computer and choose "manage" Select: Disk Management Select the partition where Windows 2000 was (is) installed. Right click and choose format You can now use this partition to store data and or programs

Feb 01, 2011 | Microsoft Windows XP Professional

2 Answers

Hi. I have a problem with the hard-disk. I have two partition. One is Windows (C:) and another is the one that I have all my documents (doc,mdb, photo, music, movies etc). When I open the partition with my...


Hi, Infact you do have a virus if you want to enter the other drive I'm assuming it would be D: on your computer go to windows explorer and right click on the drive select explore. This should open the drive. The next thing to do is select tools from the menu in the explorer window. Select Folder Options and then select view from the tabs. Scroll down till you see an option to see all files. Once that is done press ok. You should be still in your D: drive. Looking at the files now there should be an autorun file on the drive. This file was put there by a virus you can try deleting this file and all the other files that have funny names in the folder. This won't stop windows thou from giving you the Open With... if you double click the drive in you My Computer folder. The only work around I know is to right click the drive and select explore to get access to your files. I would then recommend backup everything on the drive that you need and formating that partition to make it work properly again.

Nov 25, 2010 | Microsoft Windows XP Professional SP2

3 Answers

Recycler folder virus


You don't have a virus, you have the folders without an executeable link. Use windows explorer to delete the files you want to get rid of.

Sep 07, 2009 | Microsoft Windows XP Professional With...

2 Answers

How to open without format when i open my drive it displayed do u want to format if i foramt my drive i will lose my data pls tell me how to open it without format


Windows has found a problem with the F.A.T. (File allocation table), thus windows wants to format the drive. Other Dos mode commands like FIXMBR, (fix master boot record) may make retrieving your data impossible.
There is a way to get around this with out loosing all your data.
Before we get started I need you to check the data cable & power cable connected to the drive. Unplug the power cord from the PC. Open your case. Disconnect the power cable & data cable from the drive. Than re-connect the power cable & data cable, follow the data cable to the motherboard & check it's connection.
(By doing this you are making sure the cables are fully connected, sometimes they come loose but you can't tell just by looking at them). Put your case back together & plug in the power cord.
Load your windows CD into CD-ROM. Start up your system & at the same time press the F8 key on your keyboard every two seconds. A screen like the one below will load;

9bfe434.jpg
Choose your CD-ROM with windows in it.
Windows will see you have a version installed & it will give you other options. Read the screen prompts. You want to create a partition within the free space of your drive. Follow windows instructions. Windows will creating a new partition . Install windows into that new partition. (This will be a full install). Your old windows will not load.
The data within your old partition will not be deleted!
When you have finished installing windows update it. Install motherboard drivers, printer drivers & programs ect. When finished you can now copy folder & data to the new windows. (All this will take time). Most data will be located in folder shown below. You can copy & past the data / folders from the old partition to the new windows;
C:Documents and Settings User nameApplication DataMicrosoftAddress Book
C:Documents and Settings User nameDesktop
C:Documents and Settings User nameFavorites
C:Documents and Settings User nameLocal SettingsIdentities
C:Documents and Settings User nameMy Documents
Data from any program you may have installed.

When you are 100% sure you have recovered all your data, you can delete the old partition through windows disk management. How to run disk management?
Click the start button & click Run. Type, diskmgmt.msc into the run window & click ok. Within in disk management you'll see all partitions on your hard drive, you'll also see your CD-ROM & any other drives What was once your C: drive will most likely be labeled to another letter. To find your old windows right click on a drive within disk management & click open. (Make sure you do not delete the wrong partition / Windows).
To delete the old partition right click on the old partition & click, Delete Partition. Close all opened windows & restart. Windows will automatically add the drive space to your new partition.
Operation complete.

Good luck!
Mike

May 06, 2009 | Maxtor Hard Drive

1 Answer

Boot problems!


Hi gcooper1873,
If your primary IDE has a copy of windows already on it, than that alone can cause the system to re-boot & go into a loop of re-starting. It is alway recommended to install windows fresh when a user replaces the motherboard with a new motherboard. The only execption to this rule is if your replacement board is an exact match of the motherboard. Plat it safe. If you have another IDE data cable replace your current data cable. See if the system restarts.
If you have data on the primary IDE & do not wish to loose the data from your old windows than you need to create a new partition within the IDE's free space. This should stop the system from restarting. You can leave both IDE drives connected for this. Load your Windows XP CD & boot to it.
If the system does not load the Win CD than manually restart the system & press the F8 key every two seconds as the system boots. You should get this screen:
2fc53e5.jpg
High-light the CD-ROM with the windows CD in it & press enter.
Read the display from windows XP's screens. You want to create a partition within the free space of your primary IDE. Than you want to install windows onto that new partition. By doing this you will not loose any data from your old windows partition. (You'll be able to delete the old win partition later).
Install windows complete & install all of your motherboard drivers from the Gigabyte CD.
Turn on windows firewall for protection. Click on, Activate Windows & do so by phone. Its free.
Update window. (Suggestion, when updating windows look through the updates & find .Net framework 1.0) & install. Its prefered to install all .Net framework's in order. ( 1.0, 1.1, 1.1 hotfix, 2.0, 2.1 ECT). Windows will want to restart your system inbetween some of these. Do so. You will also notice you may have to click on your user ID to log into windows, this will go away after all .Net frameworks have been installed. Do not remove guest from within user accounts in control panel. Once windows updates are finished you can now copy the old partitions data folders to the new windows folders.
Suggested folder's to copy:
C:\Documents and Settings\ User name\Application Data\Microsoft\Address Book
C:\Documents and Settings\ User name\Desktop
C:\Documents and Settings\ User name\Favorites
C:\Documents and Settings\ User name\Local Settings\Identities
C:\Documents and Settings\ User name\My Documents
Data from any program you may have installed.

Now you need to get rid of the old partition with the old win XP on it.
Use windows disk management program.
Click the start button, click on run & type in " diskmgmt.msc " & press the enter key.
You'll need to change the old win partition to a different drive letter. Example: Your IDE drive had one drive letter assigned to it - C:\. Windows most likely kept the letter C:\ assigned to your old windows.
With disk management you can re-assign all your drive letters. Once your sure you have all your data copied over onto the new installation you can delete the old windows partition.

Which one of these motherboards is your's? Click the link below;
http://www.giga-byte.com/Search/Search_List.aspx?Keyword=GA-P31&SearchType=Spec

Good luck gcooper1873!
Any question? Post it here....
Mike

Oct 21, 2008 | Intel Motherboard

1 Answer

Problem with the drive


Hi pravin,
One must pay close attention to the display screen when performing a new instillation of windows. Windows will show you the drive partitions. In your case windows will show there are two partitions. One C:\ & a second partition F:\. Perform a 3rd installation of windows. When you get to the screen where you can see both partitions (C: & F:) have windows delete the F: partition. Than have windows format the C: partition. Once C: has been formatted have windows install its self onto C:\
Install your driver software for your board. Than update windows through windows update service.
If you wish to back up your personal data to a CD/DVD writer, suggest you do this before formatting the system. Suggested folders to back-up.
C:\Documents and Settings\ User name\Application Data\Microsoft\Address Book
C:\Documents and Settings\ User name\Desktop
C:\Documents and Settings\ User name\Favorites
C:\Documents and Settings\ User name\Local Settings\Identities
C:\Documents and Settings\ User name\My Documents
Data from any program you may have installed.

Once windows has been updated & you install anti-virus software you can copy & past each folder over the new folder in windows.
How to install windows XP. http://support.microsoft.com/kb/316941

Good luck pravin!
Mike

Sep 23, 2008 | Microsoft Windows Xp Home Edition Sp2...

Not finding what you are looking for?
Microsoft Windows Vista Ultimate Edition Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...