Question about Samsung HT-BD2R 7.1 Channel Blu-ray Home Theatre System Theater System

2 Answers

I have no surround sound when watching normal T.V

I have purchased a Samsung 756 LCD wth Samsung Home Theatre and HDMi cable. I only get sound when watching movies but nothing with normal T.V viewing so I have to shut down surround sound and listen through T.V. Is this normal

Posted by on

  • Anonymous Nov 22, 2008

    Exactly the same problem. Manual advises that you don't need an optical cable is Samsung TV to Samsung. Have spent several hours with no luck.



    Love to know solution.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

Hi there, in order to listen to t.v you need to purchase an optical cable and plug this in the optical out of the tv to the optical in on the blue ray then select D.IN.1 on the blue ray and press mode on the remote until it says matrix . This will allow you to listen to the t.v through all speakers. hope this helps. Also remember to take the rubber protectors off the ends of the optical cable, a lot of people forget this :)

Posted on May 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 37 Answers

It souds like you only have your dvd player hooked up to the surround sound system, you need to find the outport on your tv and hook a caple from it to the inport on the home theatre system

Posted on Jul 12, 2009

4 Suggested Answers

  • 1 Answer

SOURCE: i cant get my samsung home cinema system to play through my t.v

I bought the optical audio cable ($15 WalMart) and use the Digital In on the DVD player to play the sound through the surround system and turned the TV speakers off. Works great! The optial audio has square ends and looks transparent with just one round shaped cable that goes from the TV to the back of the DVD player.

Posted on Jan 01, 2009

  • 1 Answer

SOURCE: samsung ht-z310 home theatre audio problem

All,

I submitted an earlier request trying to determine why surround sound wasn't coming through all speakers when playing my TV.

Looking further into the Samsung site I found out that you MUST connect the optical cable from the home theater unit to the CABLE BOX and not to your TV to get surround sound...I'm currently in the office but will change the connection once home...try connecting to your CABLE BOX instead of your TV and it should resolve the problem.

Posted on Mar 23, 2009

  • 1 Answer

SOURCE: SAMSUNG LE40R88BDX 40" LCD TV with DVD home Cinema system

how can i listen to my ipod through a samsung lcd tv

Posted on Sep 13, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect a Panasonic SA PT950 home theater syst. to a Samsung flat TV UN65JU650D?


Samsung 40'' 720p tv and Panasonic home theatre system ...

? 5:30
https://www.youtube.com/watch?v=zDG-PZtqCNE
Jan 4, 2012 - Uploaded by Nazil Rahman
Samsung 40'' 720p tv and Panasonic home theatre system ...How to Connect an HDTV to Your Sound ...

New way to connect TV to Surround sound using HDMI ARC ...

? 4:46
https://www.youtube.com/watch?v=fFNEKnlQd6I
Dec 13, 2013 - Uploaded by Tampatec
How to Connect TV to Surround sound receiver system setupusing HDMI ... to Samsung, LG, Sony, Vizio ...

Unable to connect Samsung smart TV with Panasonic home ...

www.tomsguide.com/.../unable-connect-samsung-smart-panasonic-home...
Dec 16, 2014 - hi I bought Panasonic SC-BTT405 blue ray disk 5.1 home theater and ... Unable to connect Samsung smart TV with Panasonic home theater ... I have an LG55LA9650 smart TV hooked up to a Bose 3-2-1 home theater system.

Jan 23, 2016 | Samsung Audio Players & Recorders

1 Answer

Hi how do I get surround sound coming from my tv


A Samsung home theatre system can make watching movies at home like going to the theater. Proper setup is essential to get the full benefit of the Samsung system, which is available in 5.1 and 7.1 channel surround sound configurations.
Typically the final step in setting up any home theater is connecting your TV to your system.
Like most home theatre systems, your Samsung home theater receiver will allow you to plug all of your components into it, meaning you only have to run a few cables to connect your television to your system.
Make sure your playback devices are properly connected to your receiver.
Whatever playback devices you use, make sure they are plugged into the appropriate inputs on your receiver.
DVD and Blu-ray players, satellite boxes and cable boxes should all be plugged into video inputs, and CD players should be plugged into audio inputs.
Your receiver will have labels on the back panel indicating into which input you should plug your devices.

Connect the video out to your TV's video input. Make sure you use the correct cable to make the connection. For newer receivers, the connection will likely be either HDMI or component.
If your receiver has an HDMI output, use an HDMI cable to connect the receiver to the HDMI input on your TV.
If your receiver uses a component output, use a component cable to connect your receiver to the component input on your TV.


Connect the audio output of your TV to one of the audio inputs on your Samsung receiver if you want to output your television's audio through your home theatre system.
Most recent TVs will either use an optical cable or a digital coaxial cable to connect to the receiver, allowing you 5.1 channel surround from your television.
If you have an older set, you will likely have to use standard RCA cables.


Turn on your receiver and press the "Setup/Menu" button on your receiver's remote.
When "Input" appears on the display, press the right arrow key on your remote to select TV from the list.


After selecting TV, press the up or down arrow keys on your remote to select the audio input jack into which you have plugged your TV's audio cable.
Press the "Exit" button on your remote to exit the setup menu and lock in the settings.


Samsung home theatre system owners guide download
http://downloadcenter.samsung.com/content/UM/200903/20090327091825515/HT-AS730S-XAA.pdfalso
If you're not an electronics junkie, hooking up your surround sound can seem daunting.
There are so many wires and settings that it's understandable why some people might rather pay someone else to do it for them.
But you can do it yourself as long as you make sure the speakers are positioned correctly; the wires are not only plugged in all the way, but plugged into the right places; and the settings on your television and amplifier are set up correctly.

Check to make sure your surround-sound speakers are correctly installed.
Locate the test function on your surround-sound remote control or amplifier panel to do this.
You will know your speakers are hooked up if sound comes out of each speaker during the test.
Make sure your audio cables are hooked up properly.
Make sure the audio cables running from your television to your amplifier are plugged in correctly. The red and white wires should be plugged into the "Audio Out" spot on the back of your television.
Those same red and white audio wires should be plugged into one of the "Audio Input" spaces on the back of your amplifier.

Turn on your television.
Locate the "Menu" button on either your television remote or your television set.
Scroll through your options until you find "Audio Mode" or a similar naming convention.
Select it.
Scroll through your options until you find "Digital Audio Out," or a similar naming convention. Choose it.
Scroll through your options until you find "Dolby Digital Out." Select that option.
Power your surround-sound system on.
Make sure you have the correct audio input selected.
After the correct audio input is selected, make sure you actually have the Dolby Digital aspect of your surround sound system turned on.
The default for most surround-sound systems is the standard two-channel, stereo output.
Set up a home theater
http://www.cnet.com/1991-7386_1-6214422-7.html

Aug 07, 2013 | Samsung Ht-E355 330W 5.1 Channel Home...

1 Answer

Samsung tv to panasonic sa bt100 home theatre


it is the problem with the hdmi cable .. dont buy cheaper cables it may damage after some time

Aug 24, 2012 | Audio Players & Recorders

1 Answer

Installing a pioneer home theatre dvd/speaker system.


On page 36 of the Pioneer users manual, it describes how to set your audio for HDMI interconnect. Follow the directions, and hopefully it will work. You can down load the manual from the Pioneer web site. Google "speaker system HTZ171 DVD". Click on the Pioneer site for your system and look for the download on the right side of page.
I hope this was helpful...

Jul 25, 2009 | Pioneer 45X4 DFS BLUE LED CAR CD

1 Answer

1ST TIME SETUP OF NEW TV...HAVE AUDIO, NO VIDEO


Are you getting sound through the TV from the DVD, or is the sound from the DVD coming out of your home theater/surround sound system (if you have one)?

If it has more than one HDMI port (on the TV) try changing it. If not look around in your DVD settings as it might think it is only giving audio through the HDMI to a audio/home theatre system. And using the other video outputs to give the video instead.

It shouldn't be a problem with the cable, since it is digital, if it were not to work - nothing would, or the audio would atleast be coming out weird (it it wasn't working).

Feb 28, 2009 | Samsung LN46A750 45.9 in. HD-Ready LCD TV

1 Answer

Trouble hooking up sony components..Bravia, Home theatre, blu-ray


Got your post, I will work with the model #s. Get back with you soon. Also a tip for now: HDMI carries true digital video and audio so you may not need the optic cables.
Lone99star

Jan 30, 2009 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

2 Answers

Samsung HT-BD2R 7.1 Channel Blu-ray Home Theatre System


Connect the PS3 with HDMI to the Home theatre.

Connect the TV digital optical out put to the optical input cable of HT-BD2R provide your tv has a optical digital out put

You have the option of channeling the out put through either optical or HDMI in PS3.Go to the set up and set the audio out put to HDMI

Nov 28, 2008 | Samsung HT-BD2R 7.1 Channel Blu-ray Home...

3 Answers

SAMSUNG LE40R88BDX 40" LCD TV with DVD home Cinema system


if ur surround hasnt got digital in then it wont work also its better to use the red white and yellow wire, i have hdmi and them wires hooked up and i have sound through everythin all i have to do is put it on aux 2, try it out

Dec 02, 2007 | Samsung HT-X40 System

2 Answers

Hooking up home theater


Run a regular RCA type audio cable from your TV audio out to your Home Theatre audio in. That is what I have done recently with my Samsung LCD and Home Theater. You then have to put your Home Theater on Aux 1 or Aux 2 to get the sound from TV. Ensure your TV's volume is off.
Kurtis

Nov 04, 2007 | Audio Players & Recorders

1 Answer

Set up help!!


Firstly connect your home theatre outpu HDMI to HDMI input1 on the TV. Then connect the PS£ HDMI to the other HDMI input on the TV. Now connected the optical cable from the PS3 to the optical input of the home cinema system. Your should now have surround sound from the PS3 and DVD.

Sep 11, 2007 | Samsung HTP-1200 System

Not finding what you are looking for?
Samsung HT-BD2R 7.1 Channel Blu-ray Home Theatre System Theater System Logo

518 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...