Question about D-Link 802.11g Wireless Router WBR-1310 (WBR1310)

2 Answers

I can't get my wireless d-link router working

I have a d-link wireless router and i had it unpluged for a month or two and when i set it all up it did'nt work my ip:192.168.0.1 model-wbr-1310 broadband-modem i don't know how to acess it

Posted by on

  • Anonymous Apr 07, 2009

    I have roadrunner high speed cable and a d-link attatched. I can not get the wreless system to work. Each time I hook it up it shuts down my internet service. When I take it off I again regain access to the internet.

    I purchased d-link Model DIR-615 ,it is only 6 months old. how long do they last?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Not sure if this will help you but I had trouble connecting my Dlink wireless router DI-524UP to my Thomson Speedtouch ADSL DSL modem.

The problem was that after inputting the PPPoE settings in the router, I lost internet connectivity.

The solution was to set the modem into bridge mode, then put the PPPoE settings in the router.

Thomas

solar panels guru

Posted on May 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 65 Answers

To access the configuration page for your router, try 192.168.7.1 instead of the 192.168.0.1. If that doesn't work try and go to the manufacturers website and see if you can find the correct address. These must be default numbers as they are similar to others I've seen. In the prompt for username and password, leave user name blank and type admin into the password box.You may need to reconfigure but I would see if there is free Live Chat support available from the manufacturers website for that. Try uninstalling and reinstalling the router program/soft ware that came with the router .Hope this helps
Matt

Posted on Nov 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I've had my D-Link router for about 5 years now. The model is WBR-1310. The connection worked fine up until today. I took off the connectivity between the router and my PC about 6 months ago,...


If the default password on the D-Link has been changed then-
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ON untilthe LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jul 21, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have a D-Link WBR-1310 router. It worked fine on Thursday evening. Now my laptop and my TIVO cannot even detect the router. I have tried resetting it and even unplugging the router and plugging it...


I suggest you RESET the D-Link back to the default setting and configure the wireless settings again.
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jun 18, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I can connect to the intenet directly from dish but when i put it through the router i can see the router on computer but no internet..how can i fix that. i have unplugged it and reset it many times and...


You have to go into the router settings and switch it to a static ip address. You will need the settings from Dish and you will have to manualy enter then into the router.

Jun 10, 2011 | D-Link DIR-615 Wireless-N Router (54682G)

1 Answer

Can conect wireless ,ethernet cable work fine but not wireless


.Log into router ( 192.168.0.1) enter into the browser window.
2. Verify wireless router name( on the computer) >>> ( on/off) on the status page in the router.
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Here is the instruction set for your model router :to set it up wireless follow the emulator instruction at this link:
http://support.dlink.com/emulators/wbr1310_revA/104/wizard.htm

This is for all routers to set up wirelessly.

Aug 11, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

My laptop say i am connected with internet access but it is not; when i check network magic there is a red x through router and laptop; how do i fix this...have unplugged and reset but nothing works; seems...


uninstall the network magic . that software has lot of issues.
You can uninstall the program and try to connect using the windows utility. that is very easy and that works properly.
Is there any computer connected to the router with the cable. If yes then open the router set up page and check the wireless settings of the router.
Click here for more information about the router and network

Jan 13, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I my dlink is working but i can not log in to dlink network to change setting


I would first try to connect thru a wired connection to the router if you are using wireless. then in your browser type 192.168.0.1. You might have to unplug and reset your router if you can't connect.

Oct 25, 2009 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

D-LINK Wireless G Router WBR-1310


Try changing the channel on your wireless setting or try downgrading your operating system to windows XP.

Jan 02, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Wireless router does not connect to the internet


While you have the router connected to your modem, try unplugging the modem and plugging it back in. This will force the modem to redetect network connections.

Apr 15, 2008 | D-Link Air DWL-122 802.11b Wireless...

1 Answer

Can't connect to internet


pushed the refresh button got back on track thanks anyway

Feb 29, 2008 | Linksys Wireless-G WUSB54GS 802.11g/b

5 Answers

How do I secure my dlink wireless connection?


Type 192.168.0.1 (you can type the router address if you have changed) and enter on browser's addressbar. Router's interface will appear.
Click on SETUP and Click on the WIRELESS SETTINGS at left side. on the page you will see the option of WIRELESS SECURITY by drop down menu you can choose the Security mode that you wish. here is the link for the emulator
http://support.dlink.com/emulators/wbr1310_revB/wireless.htm

Please post your question if you need further assistance
Good Luck

Jan 19, 2008 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

883 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...