Nike heart rate monitor triax c5

Where did you get the band?

i have the same problem... did you find any solution?

<P><A href="http://niketown.nike.com/niketown/info/pdf/c5_manual_eng.pdf">http://niketown.nike.com/niketown/info/pdf/c5_manual_eng.pdf</A></P><P>&nbsp;</P>

You will find manual in my tips.

Try to download manual in my tips.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all NIKE watch manuals.Rate me, please.

I had to take the following steps to get it to work in Windows 7 after running the setup executable under the Comments in the Windows row from http://www.ftdichip.com/Drivers/VCP.htm

1. Open up Device Manager, right click on the Triax Elite and select Update Driver Software.
2. Select "Browse my computer for driver software" in the window that pops up.
3. Click "Let me pick from a list of device drivers on my computer."
4. Scroll all the way down the list of "common hardware types" to USB controller.
5. Choose FTDI from the list of manufacturers and choose the "USB Serial Converter"
6. Confirm that you know what you're doing and want to install this driver.
   

Windows then finds another Unknown Device which is the serial port. Repeat as above but choose Ports for the common hardware types and then FTDI and "USB Serial Port".

Afterwards, run the latest Nike Triax Elite software (that you can download from http://www.nike.com/timing/extranet/elite_software/ and it should work.

Try to find it here:

http://www.nike.com/timing/

Rate, please.

Maybe you can use it on an armband like with an iPod. Even with velcro.

If you have the cheststrap then you don't need anything else. If you don't have the cheststrap piece then you need one. The watch itself does not moniter your heart, It only reads the signal being sent by the moniter on the chest strap.