You need to download new firmware from the Panasonic site onto an SD memory card then follow the instructions on the site to load the new programming onto your TV. This procedure fixed our Viera shutdown issue.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sep 15, 2012 - Uploaded by alwaysafix
My tv turns on and off by itself the minute I plug in the cable. .... Samsung E6030 led tv hv blinkin red light ...
Depends on the model. Some models have energy saving feature
The unique energy saving feature is called 'Automatic Power Down'. This means the television will self-switch into stand-by if no television remote control commands are received within 4 hours. This feature is an energy saving solution for situations where the television may be left unattended for extended periods and has been enabled as the default setting.
You will see an on screen warning prior to the automatic shut down. Automatic shut down will be averted by depressing any key on the television remote control.
Use of automatic power down functions will be progressively introduced to future models in an effort to reduce energy consumption and greenhouse gases.
If you would like to disable this feature you may follow the instructions below (depends on TV Model)
1. Press theMENUkey on the remote control.
2. Press theright arrow keyand highlightSETUP.
3. Press thedown arrow keyand highlightAutomatic Power Down.
Try this: on your remote will be a button labeled "menu" that should contain a list of items you can adjust...I'd look to the automatic timer feature and check to see if somehow this has been set up to turn off the TV.
Turn the television on and as soon as the screen turns on repeatily press the input button or change the input to whatever input you are using from a source device. As long as you change it to anything other than RGB.
Your television is essentially a big computer monitor with multiple inputs and a tuner. When using your computer and shutting it down the monitor will go in a power save mode. You don't need to shut off your monitor due to this power saving mode. When you power up your computer your monitor automatically turn on.
With the VIZIO and the RGB (computer) input the television will act just like a computer monitor. When you have a computer connected it will power down automatically when you shut off your computer. When you turn your computer on the VIZIO will automatically come out of standby mode. This is through RGB only.
This is normal operation for the VIZIO but can see confusing when nothing is connected to the RGB input. If you change your television input to RGB it will sense no signal on the input and will go into standby mode after about 5 - 10 seconds. If you were to send a signal to the television through RGB it would automatically kick on.