Question about Car Speakers & Subwoofers

Open Question

Have cq4400 radio missing plug how or wheredo i find one

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to install Kenwood KAC-1502S into factory 1998 Chevy Z71. I feel like I'm missing a wire.

There are a few things you will need. You will need a wiring harness, dash kit, and instructions. You can get them all at . The wiring harness will make wiring it up a breeze. The harness uses the standardized color code for the wires, but the harness plug is set up to match those wires to the vehicle. All you do is plug it in. The dash kit will have mounts and trim pieces to make your install look good and hold the radio in correct position. The instructions....well that's self explainatory. hope this helps

Aug 29, 2011 | Kenwood Car Speakers & Subwoofers

3 Answers

My 2004 Honda Accord EX 4door radio w/6cd changer and XM radio stopped working. Fuse is OK. Had problem with display and had scheduled warranty replacement, but battery was changed and now no radio.

if the repair guys didn't finish the job and fix the radio if that was the point of the repair then I recommend you contact them again or why is the radio missing or not fixed yet?

Jul 13, 2008 | Car Speakers & Subwoofers

1 Answer

I need to get a wireing harness for Panasonic CQ VD7001U

Are you missing the wiring harness that plugs directly into the radio? If so, then you will have to contact a Panasonic dealer or Panasonic's website directly. If you are looking for a wiring harness to install into your vehicle, you can find them at

Aug 28, 2011 | Car Speakers & Subwoofers

1 Answer

Need color codes for wiring

If you are installing a radio, I recommend you purchase a wiring harness specific to your vehicle. Wiring harnesses are color coded to standard aftermarket wiring. It's the vehicles wires that won't match. That's where the wiring harness comes in. You attach it to the radio, then just plug into the vehicles harness. If you vehicle is missing the stock harness, visit the websites of scosche or PAC to see if it is available.. Hope this helps.

Aug 21, 2011 | Car Speakers & Subwoofers

1 Answer

Just got a probe 1997. i have all the radio cables but i have no permanet power? where is the fuse for the electri??

There may be two fuses in the radio circuit; one combined with other devices and called 'Accessories' and a second under the dashboard in an in-line fuse holder. If the radio was missing, that second holder may have left with it.

Jun 26, 2011 | Car Speakers & Subwoofers

3 Answers

I have a tevion car radio cd player model 2413 but dont have the 16 pin harness plug where can i get one thank you

You could contact Tevion support forum here
or go to ebay and type in 16 pin car audio as your search, you may find what you are looking for there. I haven't seen one, is it a standard iso type?
Surely if it is Tevion specific there should have been one with the radio?

Mar 06, 2011 | Car Speakers & Subwoofers

2 Answers

Where can i get a wiring plug or photo of plug so can make one up for a tevion 41426 car radio as the original plug is missing (it has 20 pins)

You must see your dealer for a spare cable if available, to install your unit here is a video instruction for installation.

Feb 05, 2011 | Car Speakers & Subwoofers

1 Answer

I have just got a car with a clarion dx418r radio in, its a bit hit and miss as to working and i am trying to remove it, how do i do it?

Removal instructions depend on the make+model of the radio

Find your free removal instructions from this list on this website

Jan 29, 2011 | Car Speakers & Subwoofers

1 Answer

My friend has a citroen AX in which we now have a working radio, only issue is that it doesn't remember any stations stored.

There are 2 battery supplies to the radio,.

The main one via the ignition key circuit for the radio itself.

The other one is a permanent battery feed to the radio memory.

It is this second (permanent) feed that is missing.

Check the fuse, connectors + wiring to see if there is anything obvious.

If you have a multimeter or test lamp then that can be used to prove the problem

Sep 06, 2010 | Car Speakers & Subwoofers

1 Answer

Power Never Comes on

that remote wire has to be hooked up to the power or the radio power antenna wire which will switch the remote wire on when the radio is turned on, so that remote wire really should be hooked to the radio wire that gets power when the radio is turned on , thats why the sub is not turning on


Oct 26, 2008 | Infinity BASSLINK Car Subwoofer

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides