- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Instead of green auto mode set to P mode and chagne the flash setting to non auto.If flash is is in auto mode flash will not fire and picture will be blurry.So your flash must fire every time (and it must not be decided by camera's auto flash mode). I am sure this will solve your settings. Please rate if satisfied.
The darkness shouldnt be that exspensive some trouble shooting and a few dollars should straighten that out. The screen however will cost a couple of hundred dollars, although that would still be cheap for a big screen, and that model does play exceptionall well when operating properly.
THIS IS AN OLDER SAMSUNG CTR PROJECTION T.V. IF IT HAS A LOT OF HOURS ON IT OR IF IT HAS BEEN SITTING FOR A LONG TIME IT IS MOST LIKELY THE C.R.T.s. IF THE PICTURE IS OUT OF FOCUS AND BLURRY THAT IS WHAT IT IS. WHEN THEY WARM UP THEY WILL GET BETTER. TO REPLACE THE C.R.T.s IN THIS SET IS NOT COST AFFECTIVE. YOU HAVE ALMOST $800 IN PARTS ALONE. AND IT IS A BIG JOB... DON.
The first thing to check is for loose conections,the problem is related to the high voltage but it can start in the main board with one component loose,when the high voltage is developed it goes to what is call the distributor block,a lot of sets have the focus and screen controls coming out of this block for each picture tube,this block might be bad but before we go to him we need to check everything is solid in the main board.If you are familiar with electronics you can remove the back cover and tap the chassis with a wooden or rubber handle to see if the set reacts,if it does you need to be atentive what area makes it react and flip the board to do some resoldering,If you are not too familiar with tv service you need the assistance from a servicer.Let Us know how it goes or if you need more information.