Question about Cell Phones
I noticed that my LG300G model phone (net10) would not ring one day, and when I further ''explored'' my phone, I discovered that there was no longer any keytone, ringtone etc noises! I can still hear people when they call me (or when I call them), however.
Recently, my battery fell out (O.o), but the sounds still worked after I replaced it, so I don't think that is the problem. Please help?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: changing the ringtone
actually jkhnetx i can help you address those problems
if you want it to ring and vibrate at the same time, do the following:
1. open phone, and push the side key under the memory card slot.
2. scroll over to the 'PROFILE' setting
3. highlight the 'NORMAL' setting, and push the 'OPTIONS' key.
4. go to 'EDIT'. push 'CALL ALERT' and you get a wealth of options. you can also edit the MESSAGE and PHONE SOUNDS options.
Posted on Oct 27, 2007
SOURCE: unlocking net10 lg300g phone
You can't unless you can get new firmware for the phone, other than Net10's. Once the phone runs out of minutes, you phone will no longer be able to make or receive calls. Net10 phones keep track of your minutes on both your phone, and on the network to help reduce fraud. IF there is any other firmware out their, and you successfully flash the phone with it, you can then proceed to do a network unlock. One of the best paid resources is gsmliberty.net
Posted on Feb 18, 2009
You might need an network unlocking to be done.
NETWORK UNLOCK CODE:
You can unlock it by flashing your mobile if your mobile is a CDMA mobile...
The procedure for flashing your mobile is in the link below
It has an video explanation.
If your mobile is not an CDMA mobile , you can get the network unlock code(NUC) by just contacting the current network provider customer caredepartment.It is free of cost.
Therestrictioncodecan be got from your old service provider..This restriction code iskeptto prevent someone who stole themobile from using it withanotherprovider...
They will have a security check done with your date of birth etc..to verify whether you are the exact owner of the phone..
After that they will provide you the restriction code to unlock it and use it with another service provider..
It is all free of cost donot pay anyone for this seeing some advertisement over internet . That is all fake ads.
The above proceudre works and you can verify that by seeing the rating of an happy customer here..
Posted on Jun 24, 2010
I called 1-800-876-5753(tracfone-customer service and tech. support) and i was put on hold for a minute or two, but after that it went straight to a representative for tracfone. Just tell them you are with straight talk and it says your phone says "prepaid service disabled." They will give you two codes and after each code it will restart your phone. it takes a maximum of 5 minutes for the conversation. It was very easy. I hope it works, good luck.
Posted on Jun 28, 2010
Tips for a great answer:
Sep 16, 2014 | Net10 ZTE Savvy No-Contract Cell Phone -...
Aug 30, 2012 | LG 300G Prepaid Phone Net10 with 300...
Dec 14, 2010 | Cell Phones
Jul 10, 2010 | Sony Ericsson Walkman W810i Cellular Phone
Aug 12, 2009 | Sharp 911SH Cellular Phone
Jan 27, 2009 | Cell Phones
Nov 05, 2008 | Cell Phones
Feb 02, 2008 | Nokia 1112 Cellular Phone
181 people viewed this question
Usually answered in minutes!