Question about Vehicle Parts & Accessories

Open Question

Selca im3.22 immobiliser fitting instructions

I have purchased the selca im3.22 car immobiliser and it has no instructions on how to fit it into the vehicle
i was wondering if you have anonline link on how to fit it, or could give me instructions as i really need them.
thanks so much
rob

Posted by on

5 Suggested Answers

alicantecoli
  • 22059 Answers

SOURCE: need instructions on how to fit auto adjusting peugeot 206

cant honestly say i have fitted one on this model,but is it full auto or is their an adjuster on the back of the clutch pedal.??? look first.Ford escort one is a bit of a pig but easy when you have the knack same as a golf easy when you know how .Now golf cable comes with two plastic ties that hold auto adjuster together and you dont relaese them till the cable is fitted.Can you describe the set up then i might be able to help some more.American web site so a lot of models not listed here and the lingo take a bit as well ,i mean whos ever heard of pigs tails or fire wires.Well what else can you expect when they are not taught the queens english and dont drink tea, just waste it by throwing it in the sea.

Posted on Mar 05, 2009

  • 1 Answer

SOURCE: cant fit nania first car seat

We just fitted our 'new' secondhand narnia yesterday with instructions and it was a bit of a fiddle, but once in was very secure. Place the lap/diagonal belt through the slot in the back so that it comes out the front, it then goes over the arm rest, back through the other slot, across the back of the seat, then through the slots in the other side over the arm rest again and click it in.

Posted on May 17, 2009

  • 1 Answer

SOURCE: NO INSTRUCTION MANUAL FOR CLARION NAVIGATION SYSTEM NVS613

i want the manual of the clarion nvs613

Posted on Jul 11, 2009

  • 1 Answer

SOURCE: nania car seat

I BOUGHT BRAND NEW NANIA CAR SEAT BUT NO INSTRUCTIONS, FROM ARGOS!! YOU NEED TO CONTACT THE MANUFACTURES WHO ARE CALLED Team-Tex and the uk contact no. for them is 0116 284 4910, they will send you the manual that you need.

Posted on Aug 05, 2009

  • 57 Answers

SOURCE: Fitting Instructions - Hard Luggage - Honda 800 VFR VTEC

Go to http://www.vfrdiscussion.com under downloads...manuals, you will find the hard luggage installation instructions.

Posted on Sep 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have got toyota noah which wont start. the cranking its there. battery is good. there is no powere to fuel pump. fuse all ok. even changed the engine control unit.


If the vehicle is fitted with an immobiliser that could be the problem. Have you checked for a spark?

If an immobiliser is fitted the new engine ECU will have to be coded before it will work.

A wiring diagram is almost essential to diagnosing the problem. There is likely to be a relay controlling the supply to the fuel pump but what controls the relay? If the relay is controlled by the engine ECU there will be no supply until the immobiliser is disarmed.

If the vehicle was presented to me I would check for a spark and if a spark is present I would provide a temporary supply to the fuel pump to test if the engine starts, proving the fault is not immobiliser-related but a wiring or switching problem.

Jul 18, 2016 | Toyota Cars & Trucks

1 Answer

Waiting to get a new ignition for 96 Acura rl will it start up or will I have to get it programmed to the car


if you have the new ignition key barrel rekeyed to suit the existing key before fitting there will not be a problem as the existing key will work the immobiliser ( talk with a locksmith for that job)
if you get new keys then it will have to be reprogrammed to suit the car immobiliser system ( vehicle service centre)

Jul 07, 2015 | Acura Cars & Trucks

1 Answer

What is imobilizer


It is a device most vehicle manufacturers have fitted as standard since a huge upsurge in carcrime during the late 1980's and early 90's and by the mid to late 90's most cars were fitted with one, some long before, as standard integrated into the vehicle electronics so that when the device is armed the engine management computer is prevented from switching on. Sometimes the starter circuit is also switched off.

The arming and disarming of the immobiliser is automatic and might be via the central locking or the ignition switch and a special coded key or by both. More recently smart-cards are used.

Immobilisers are designed to be very reliable and only to give trouble when the inconvenience is greatest.

In the past there have been many electrical, electronic and mechanical "immobilisers" on the market to be bought and fitted as accessories to vehicles and some are still available but most are now superfluous.

I hope that adequately answers your question.

Feb 21, 2015 | Cars & Trucks

1 Answer

Won't start


it may be a dodgy vehicle immobiliser. if you have one of those push button immobilisers it might not be registering a signal to turn the fuel system of the car on. i do not see it being a mechanical problem if it happened immediately after leaving the dealership. i would return to the car and "jiggle" the wires under the drivers console to see if its loose/bad wiring. but this is all of course assuming you have one of before said immobilisers fitted. if not then of course the dealership needs to inspect and fix the problem if you litterally just brought it. chances are if you argue your point enough theyll pay for your tow truck too!

Feb 26, 2014 | 2005 Chevrolet TrailBlazer

1 Answer

Ive lost my key fod 2 my 1993 honda prelude now the alarm keeps going off and the none factory fitted immobiliser wont let my car start! could you help me disconnect or disarm it??


I lost my key for my 1993 Honda Prelude the factory fitted immobiliser is preventing me from starting the car with a new key purchased by having one cut to suit the door lock can you please hel[p me disconnect or disarm it cheers Glen

Oct 28, 2010 | 555d Prelude Immobilizer Bypass For...

1 Answer

My Golf 4 car key got broken at the rubber/metal neck,thus i couldn't inset the start the car. so got a welder and welded a small metal attached to the key to enable me have a grip.... oops immobile...


if your vehicle has a factory engine immobiliser the key has a transducer in the base of it that activates & deactivates the immobiliser so you will most likely have to get a genuine volkswagen key from a dealer to solve the problem.....hope this helps.....cheers

Aug 07, 2010 | Volkswagen Golf Cars & Trucks

2 Answers

I need the instruction manual for a toad 101cl car alarm....Can anybody help


i just tried to get into my car, it has a taod immobiliser and alarm fitted, but everytime i open the door the alarm goes off, and i just put the key in to the ignition and the remote fob should disable the alarm but its not, and nothing happens when i turn the key.

Apr 18, 2010 | Vehicle Parts & Accessories

1 Answer

Battery ran flat on my 'R' reg VW Golf gti while I was away in Australia. The alarm was disconnected a couple of years ago but now the immobiliser seems to have triggered as there is no spark or petrol...


sometimes it depends on the type of allarm, if it is factory fitted they are a nightmare to do as most of the wireing for the allarm is intergrated into the loom, where as if it is an after marked alarm ( one fitted later on ) it shouldnt be to bad but still a long and complicated job to find all the wires and reconnect the originals bypassing the immobiliser/alarm if you are a complete novice this should not be attempted as you could immobilise the car completely, best thing for you to do is get an auto electrician to have a look at it for you, sorry its not much help

Feb 15, 2010 | 1999 Volkswagen Golf

1 Answer

Dashboard immobiliser light flashes. car tries to start but doesn


you cant if it has the emobilizer on you would have to know the resister number to install a resister chances are its already gone. there be a reprogram you can do to get it going sometimes when the battery goes dead the bcm will lose some of its programing . hope this helps Tunderboltz.

Jan 27, 2010 | Vehicle Parts & Accessories

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

840 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts

yadayada
yadayada

Level 3 Expert

71231 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13732 Answers

Brad Brown

Level 3 Expert

15220 Answers

Are you a Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...