Question about Brother PE-150V Computerized Sewing Machine

Open Question

Babylock BMP6 thread sensor prob

Hello there! i have Baby Lock BMP6 Embroidery professional). And here is a problem: on 2-nd, 4-th and 5-th needle appears an error warning (check upper thread or lower bobbin thread". I checked - everything is ok with both threads. I use a good threads (Isacord-40). And another 3 needles is fine. Coud you help me, please?
Thank you!
Yaryna

Posted by on

  • marshamy Jan 02, 2009

    I have the BMP6 as well. The 3rd needle position keeps getting a check upper and lower thead error. I have checked the bobbin tension, type of bobbin, ie. plastic or cardboard, re-threaded, used different needles and thread. I've taken to avoiding this position.

×

5 Suggested Answers

SOURCE: needle not picking up bobbin thread

Check the timing.

Posted on Mar 06, 2008


  • 4 Answers

SOURCE: Start up..Babylock BMP6

Not if you just want to get the patterns off the internet, etc., you cannot, or at least with my older version, make your own designs. You need to download the program to your computer. Its pretty simple if you get on the internet and download the designs put your palette on your computer, go to the designs, with a blank card, and load the patterns. Hope this makes sense.

Posted on Aug 12, 2008

  • 1 Answer

SOURCE: I need a needle plate spacer for my BMP6!

Call Bill Stone at Sarah Howard Stone's
The number is 334-262-7154

Posted on Jan 28, 2009

  • 1 Answer

SOURCE: The lower thread is tangled. Upper thread is

The top thread is fine but the thread on the botton is a mess sometimes is has to be cut out

Posted on Sep 29, 2010

SOURCE: Needle goes down but don't pick up the bobbin thread. It come up and tell me that my upper or lower thread is cut.

try changing the needle
try rethreading the machine top and bobbin
make sure to use every thread guide-this is improtant for the
thread tension
make sure the bobbin is turned correctly in the bobbin case
also could be a problem with the computer motherboard
or there could be a problem with the timing

Posted on Dec 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Do you have a manual for this machine


sorry no we do not have any Manual's here. search for one on Google LUCK

Jul 31, 2015 | Baby Lock Esante

2 Answers

WHAT DO I DO TO GET MY BABY LOCK ELLURE ESL TO PICK UP THE BOBBIN THREAD?


You have your bobbin inserted into the machine spinning in the wrong direction. take the bobbin out and flip it over and wind around needle plate guide and cut. Look at the little pictogram on the plastic part of the machines throat plate. It shows which direction the thread should spin off the spool when you drop the top loading bobbin into the bobbin case.

Cheers,
Kelly
San Diego, CA
Embroidery Services

Aug 30, 2014 | Baby Lock Ellure

1 Answer

How do I override the hoop size on my BMP6 Baby Lock Embroidery Machine?


There are limits....check your manual first, or call a dealer

Feb 17, 2014 | Bernina Bernette Deco 600

1 Answer

Babylock Esante ESE-2 error beeps when performing embroidery arm test?


Something is wrong with the sensors. Take it in for a repair.

Aug 23, 2012 | Baby Lock Esante

4 Answers

I have a Baby Lock BL4-736D serger. I need the


orange-(5-7)
yellow-(4-6)
green-(2-4)
blue-(2-4)
medium weight, 4 thread

Dec 06, 2009 | Baby Lock BL1556

1 Answer

Will the Elure ESL model accept a twin needle


The site shows a twin needle setting.

http://www.babylock.com/embroidery/ellure/

Have you looked at your manual or bought the more expensive book from your dealer? I have found my book for my Evolve a VERY good investment (70 bucks, but worth every penny these past 2 years!)
Baby Lock have very good cust. service either on the web or right at your dealer. Most dealers will give free lessons upon request.
I hope this helped

Jan 20, 2009 | Baby Lock Ellure

1 Answer

I need a needle plate spacer for my BMP6!


Call Bill Stone at Sarah Howard Stone's
The number is 334-262-7154

Oct 27, 2008 | Baby Lock Ellure

4 Answers

Baby Lock Serger Thread keeps breaking


Mmmm...., maybe NOT the solution, maybe, just a key.

I have a copy of theBaby LKock EA-605 instruction booklet in English, Germann, French and Spanish. NO ideas how it casme into my orbit, but happy to pass it on.

Aug 11, 2008 | Sewing Machines

2 Answers

Start up..Babylock BMP6


Not if you just want to get the patterns off the internet, etc., you cannot, or at least with my older version, make your own designs. You need to download the program to your computer. Its pretty simple if you get on the internet and download the designs put your palette on your computer, go to the designs, with a blank card, and load the patterns. Hope this makes sense.

Apr 14, 2008 | Baby Lock Ellure

Not finding what you are looking for?
Brother PE-150V Computerized Sewing Machine Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...