Question about Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

The computer dont ready the printer it makes copys but do not pri

It looks like the computer does'nt read the printer or the black ink

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

For this issue try updating the FIRMWARE to the latest version, use the website www.kodak.com/go/downloads

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the black ink cartidge and made a few copies then blank lines began to appear . So I cleaned the printheads and still the same copy problem Then I went the next step and removed the printheads...


when u say u see black lines when making a copy after installing a new ink it is possible that the scanner glass and scanner lid need to be cleaned and try to check if this printer has a scanner strip--it is located at the automatic doc. feeder--clean it as well then try to make a copy one more time

Apr 02, 2010 | HP Officejet 9110 All-In-One InkJet...

3 Answers

My kodak 5300 printer won't prit nt in black why?


Try this one, Turn on the printer, Take out the inks, remove the printhead, put back the printhead make sure it will snap and you hear a click, put the inks back, wait for the printer to initialize, Press the Menu button, look for Calibrate printer, then print calibration page, then scan it after. Load a regular paper. Then try to print a demo page by pressing Photo and Copy at the same for 5 seconds then let it go. If same problem persist call this no for further assistance 1800 421 6699
Thanks

Aug 12, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Have a Canon PIXMA MP150, just recently replaced the Black ink cartridge. When I make copies I will press the black ink button for my black copies but the only light that come on is the color ink button. ...


the problem occurs mainly due to following reasons


clogged catridge head
*clean it using ammonia solvent

bad contact of catridge terminals
*clean the contacts of both catridge and catridge holder

Apr 13, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Psc scanner problem


i dont know how to cancel or stop printing job
computer continue ro make copies it used up all ink
i replaced ink both black and color and it is still making photoes and other jobs

Feb 25, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

HAS BEEN WORKING GREAT. YESTERDAY IT DECIDED TO


unplug the usb from the back of the printer. shut down the computer.
Make a copy by placing something on the scanner glass on top and pressing copy.

if it copies that means the hardware is okay.

reconnect the usb and reboot the pc. it would start printing any spooled up print jobs that got jammed when the paper got jammed.

if that dont work look at the bottom right and see if there is a printer icon at the bottom right. if there is double click on it and cancel all pending jobs.
reboot
.
if the copying dont work that means the paperjam killed the printer and you need a new one.

Cheers

rate if you got a fix . if not you know what happened.

Feb 18, 2009 | HP PSC 1315 All-In-One InkJet Printer

3 Answers

Xerox docucolor 12 copy/print printing all black


Hi,
If you moved the printer, make sure the conections from the printer to the Fiery are secure. If loose the prints will be black but when copying will be fine.

Jul 19, 2008 | Xerox DocuColor 12 Printer

1 Answer

Error 9-363


NOTE: The problem occurs because of the trickle development system in the machine, making extended lengths of black and white copies / prints does not allow the black developer housing to purge itself of excess waste Toner (Dry Ink) and Developer. There are two solutions for the problem:
  • Make 1,000 copies / prints of a black and white job, then make 150 copies / prints of full color. Continue making 1,000 copies / prints of the black and white job, then 150 full color, and so on, until the entire black and white job is complete.
  • Make extended jobs in groups of 100 by making 100 copies / prints of the black and white job, then allowing the machine to cycle down (return to 'Ready') and making the next 100 copies / prints. Continue in this pattern until the entire black and white job is complete.
NOTE: The above solutions are based on jobs using 8.5 x 11 inch paper, single sided, with no more than 28% coverage.

Feb 18, 2008 | Xerox DocuColor 12 Printer

1 Answer

9-369


: The problem occurs because of the trickle development system in the machine, making extended lengths of black and white copies / prints does not allow the black developer housing to purge itself of excess waste Toner (Dry Ink) and Developer. There are two solutions for the problem:
  • Make 1,000 copies / prints of a black and white job, then make 150 copies / prints of full color. Continue making 1,000 copies / prints of the black and white job, then 150 full color, and so on, until the entire black and white job is complete.
  • Make extended jobs in groups of 100 by making 100 copies / prints of the black and white job, then allowing the machine to cycle down (return to 'Ready') and making the next 100 copies / prints. Continue in this pattern until the entire black and white job is complete.
or
  1. Power OFF the machine.

    dc12-pwr-sw.jpg

  2. Wait 30 seconds.
  3. Power ON the machine.

Dec 04, 2007 | Xerox DocuColor 12 Printer

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...