Question about Projection Televisions

1 Answer

I have an insignia model ns-lcd42hd-09 hdtv that show the number two(2) on the top right side of the screen. How do I get it to go away.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The problem originated in the HD cable box. I turned off the box for about 10 minutes and after the power was restored and the reset was completed the problem disappeared.

Posted on Nov 21, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

You can hear the sound , just no picture on screen

I presume model number is correct---with sound after about 2 minutes if you see a faint band of white noise top to bottom to the right of the center of the screen (easy to miss) C509 is bad.

Oct 28, 2012 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Bright star pattern dots on screen

dust on the optical lens possibly or a defective light engine.

May 28, 2010 | Mitsubishi WD-73733 73" HDTV

1 Answer

Mitsubishi TV Model #WS65903 - Green Shadow Lines on Screen

Something is not right here--The green is adjustable in the TECH menu--did this person adjust or try to adjust in the customer or the TECH menu?

If you confirm actual model number I can tell you how to get into the TECH menu--yes--green will not adjust in customer menu--it determines geometry and is only adjusted in the TECH menu.

Also, this set requires any convergence adjustments to be done in 480 and then in 1080--if only adjusted in one mode the other will still be bad.

Let me know if you know how to adjust in TECH menu or not--with exact model number I can tell you how to get there.

If this helps you rate this solution as I do this here for free.


Dec 20, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

There is a small window in the right top corner with the number 2

Hit the PIP button on your remote, it will cycle through a couple of other PIP each time you hit it until you finally get back to normal.

Nov 25, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Need code for rca universal remote i have insignia 40 inch lcd flat screen tv model #NS-LCD40HD-09

I found this site:

which lists the universal remote RCA (model RCU807) code as 135

I just bought one of these TV's last night.

Good luck.

Sep 05, 2008 | Projection Televisions

2 Answers

Yellow line on right side of screen

Go to this website and read what it has to say, your TV's have major problems.

Apr 20, 2008 | Sony KDS-R50XBR1 50" HDTV

1 Answer

How to remove the front lower panelKP-65WV600 says, "The Sony KB-46WT500 has 4 round male plastic connectors that plug into round plastic holes in the particle board behind the front cover. 2 of them are even with the middle of each speaker and about 4 inches away from the inner edge of the speaker toward the middle of the front cover. The other 2 are just below the top edge of the cover about 4 1/2 inches away from the power button - 1 on each side.

Just remove the screws on the ends and then pull enenly (sic. He must mean evenly) on the front cover. You won't break it. i realize this may be too lat to help you, but maybe someone else will be helped."

I hope that helps.

Mar 21, 2008 | Sony KP-65WV600 65" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers


Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides