Question about GE 27GT619 27" TV

1 Answer

GE 27GT613 tv. has no video button

Trying to hook up video game system to tv. Tv does not have video. I have no remote control and when pressing menu button nothing with video comes up. Can I buy some type of adapter. Have game system
already hooked up, just can't get tv to video. Please help have 2 upset little boys

Posted by on

  • chrisdarts Nov 19, 2008

    I have the same problem, except it's a DVD instead of a game.

  • Anonymous Feb 24, 2009

    Same Problem i hate it i got the tv for gaming and it dont go any video or adio inputs i need help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Use the remote to tune to channel 00. THis will give you the component inputs. The channel up down buttons will skip it so you have to actually push 00 on the remote.

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo TV 27 inch stuck on Video mode. It reached this mode by me pressing the input button on my (GE) Universal remote, not knowing it would put it in Video mode and then accidentally pressing enter to...


Universal remote alway work only the basic for the tv.Beyond that will have problems or stuck in some input or modes.Sorry i can't help u, because i don't know what is the reaction to ur tv by the universal remote,must use the universal remote again tries all the buttons like video modes or input botton.Or take the battery out like 20 mins of the universal remote to erase ur tv codes enter it again.Tries those buttons u pushes before,see if u can get out the video mode.All else fail.Try website like Remotes.com to buy the tv original remote to use.

Jan 20, 2011 | Sanyo DS31520 31" TV

6 Answers

Cannot change my TV to allow my new DVD/VCr to work


u can buy universal remote control for this options.
it will help you.
thanks.

Oct 28, 2008 | Standard (CRT) Televisions

1 Answer

Trying to connect a Sega Genesis. I know it's connected properly to the place where the cable wire goes and then that is connected to the connector. What channel do I go to to play the games?


Hi,

The input from the Sega wont be on any channel number - you need to select the correct input for the Sega using the "INPUT SELECT" button on the Symphonic remote control supplied with the TV. Switch on the TV the Sega, then press this button repeatedly until you can see the picture from the Sega.

- If you are using the sockets on the BACK of the TV, the correct input is "VIDEO 1"
- If you are using the sockets on the FRONT of the TV, the correct input is "VIDEO 2". You can also switch to the "VIDEO 2" input by pressing the "GAME" button on the Symphonic remote - if you still have it.

If you don't have the Symphonic remote, look for a button marked "INPUT" or "SOURCE" if you are using a universal remote.

If you don't have any remote for the TV, you will only be able to use the sockets on the front of the TV. You will then need to switch to "GAME MODE" by using the buttons on the front of the TV:

1. Switch ON the TV and the Sega;
2. Press the MENU button;
3. Press the VOLUME UP button to open the PICTURE MENU;
4. Highlight GAME MODE using the CHANNEL UP/DOWN buttons;
5. Set GAME MODE to "ON" using the VOLUME UP/DOWN buttons;
6. Press MENU again to close the menu

You should now be able to see the picture from the Sega. If not, check you have correctly connected the Sega to the TV. When you have finished using the Sega you will need to use the method above to switch game mode off again.

Hopefully, I've covered every possible angle. If you have a different Symphonic TV model from the one listed above (ST420FF), the method should be similar, but if you have any difficulty, please post back for further assistance.

BElectric.

Jan 16, 2011 | Symphonic ST420FF 20" TV

1 Answer

How to get universal remote to turn the tv to game mode


Hi,

I don't know if this can be done with a universal remote, but if you can let me know which brand and model of universal remote you are using, I will check if it is possible. If your universal remote has an "AV", "SOURCE" or "INPUT" button, try these but make sure the game system is switched on so you are able to see if/when you have changed to the correct mode.

If you don't have the original Symphonic remote, you should be able to switch the TV to game mode using the buttons on the front of the TV as follows:

1. Switch the game system on
2. Press the "MENU" button on the front of the TV
3. Highlight "PICTURE" using the CHANNEL UP/DOWN buttons
4. Press the VOLUME UP button once to enter the PICTURE menu
5. Highlight "GAME MODE" using the CHANNEL UP/DOWN buttons
6. Use the VOLUME UP/DOWN buttons to set "GAME MODE" to "ON"
7. Press "MENU" to exit the menu and play games.

The menu should automatically close anyway if you don't press any buttons for about 15 seconds.

When you have finished playing your game, repeat the above steps to set "GAME MODE" back to "OFF" and return to watching TV.

Hope this helps. Please post back for further assistance if needed.

Regards,
BElectric.

Dec 23, 2010 | Symphonic ST419E TV

1 Answer

How do you put the tv in game mode without a remote


Hi,

Follow the steps below to switch your TV to game mode without using the remote:

1. Connect the game system to the TV using the AUDIO/VIDEO inputs on the FRONT of the TV.
2. Switch the game system on.
3. Press the "MENU" button on the front of the TV
4. Use the "CH" UP/DOWN buttons on the TV to highlight the "PICTURE" option. This is the first option so should already be highlighted.
5. Press the "VOL UP" button to select this option
6. Use the "CH" UP/DOWN buttons on the TV to highlight the "GAME MODE" option. This is the first option so should already be highlighted.
7. Press the "VOL UP" button to change the GAME MODE setting to "ON"

The TV should automatically switch to GAME MODE if you are using the inputs on the front of the TV.

8. Press "MENU" to exit and play your games.

Hope this helps. Please post back if you need further assistance.

Regards,
BElectric

Dec 06, 2010 | Sylvania 6427FF TV

2 Answers

How do I watch a dvd movie on tv? I have the dvd


press the av or au bullon on remote until you get to the dvd "channel"

Feb 11, 2010 | GE 19GT243 19" TV

1 Answer

Sanyo DS19310 access video in without remote. Device is hooked to video in. How can I get it on the screen without the remote? Or, what is the best way to hook in a DVD player when I don't have the sanyo...


your setup is already good. your only problem is how to get in into video mode. use the menu button on your tv then select for Video/Game mode using channel menu button. there should be a solid blue screen with the word Game or Video displayed. please try. let me know if this doesnt work.

Mar 31, 2009 | Sanyo DS19310 19" TV

1 Answer

No manual to figure out how to configure video settings for games


It's March 30, 2009 and I just tried hooking this same tv up with the DVD player. No remote and was ready to throw the TV out the window. Another question on this same site helped me figured it out. There is no input button. You have to plug the DVD or video system in and then go to channel 91. That's the default channel for input 1. Strange but it worked.

Dec 13, 2008 | GE 25GT240 25" TV

1 Answer

Sylvania tv input channel with dishnetwork remote


The remote control has a "Game" button, which is how you select the external input. Since you don't have a remote you can select game mode via the front panel Menu button:

1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

GAME MODE: Set to the most suitable position for TV
GAME. [+] : ON [ - ] : OFF

This will place your TV into Game mode and use the front panel video/audio jacks.

Here is a link to download the user guide: http://www.sylvaniaconsumerelectronics.com/support/manual/index.aspx

Just enter your model number.

Please let me know if you have any questions.

Good Luck!

Mar 21, 2008 | Sylvania 6427TE 27" TV

2 Answers

RCA F25645 25in TV.


I have this same TV. The DVD player is either hooked up to the video or s-video input. Go to the Menu (either through the remote or from the front of the TV) and select the Setup option. Go to the part where it asks if you want to use a DVD player. Select yes. Then select Video Input. Exit the Setup. When you hit the DVD button, it will switch to the Video input. The second step is to go into the Menu and select Channel, then go to Video Input Source. From there, select which input you are using for your DVD player, the S-Video or the standard Video (yellow composite cable).

Mar 06, 2008 | RCA F25645 25" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Standard (CRT) Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a GE Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...