Question about Nike Triax CV10 Wrist Watch

3 Answers

Triax CV10 Can not link Watch to HRM, have tried following instructions still doesnt work. Link the Speed sensor all good. Any tips?

Posted by on

  • 1 more comment 
  • bobbennis Jun 22, 2008

    Tried the steps described to link a nike HRM to a CV10 watch without results, the strap was bought seperately on ebay and is working fine, but I'm enable to link it to the watch, any thoughts??

  • Anonymous Jun 25, 2008

    I have the same problem, I did follow the steps and the problem keeps going on. I have been searching for a new chest strap SMA011, but I cannot find it anywhere. Does it work with any other chest strap from the Nike series ? Any other idea ? Thanks.

  • melkenoo Aug 22, 2008

    I have tried following these instructions. The heart rate moniter still does not work. I am frustrating wishing i never purchased this. Did anyone find a solution ?

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Nike Triax CV10 - Successful HRM reset 7 November 2008
 
I had real problems too. Even after repeatedly following the known reset steps everyone else is posting up. Here’s how I got mine going, please forgive the mind bogglingly tedious detail…
 
First make sure you’re using new good quality batteries. I used Maxell’s, bought in 10’s from Hong Kong on ebay – no problem.
 
Second, and this is the ESSENTIAL bit…move right away from the computer and any other electromagnetic sources before carrying out the known reset…
 
Third, follow the known reset steps below, adjusted to what worked for me…
 
If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit.
 
Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button.
 
The re-initialisation steps for the Nike C10 and CV10 digital HRM's is:
 
(1) reset the watch
(2) open the battery door on the chest strap
(3) move the watch to RUN mode
(4) press the reset button in the chest strap battery area without removing the battery
 
Tip - I agree with the suggestion to use a pin or needle and definitely do it with the battery in the hrm.
Tip – Thumb holds battery to stop it from pinging out, other hand performs jiggle with pin until the link is made (it links straightaway if you jiggle it just right!)
 
(5) replace chest strap battery cover…and smile!

Posted on Nov 07, 2008

  • david bennett Jan 19, 2013

    nice one - the key step for me missing from other solutions was the move away from the computer advice

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

If you can't link the hrm do as detailed in the following link If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit. Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button. The re-initialisation steps for the Nike C10 and CV10 digital HRM's is: (1) reset the watch (2) open the battery door on the chest strap (3) move the watch to RUN mode (4) press the reset button in the chest strap battery area (5) put the battery back in the chest strap (if it's not already in - it's possible to push the button without removing the battery) (6) hold both of the electrode to create a signal (probably not necessary - it usually links immediately). My suggestion is to use a very thin needle and do it with the battery in the hrm. Eventually, Nike will either eliminate the hard reset or update the manual to include this info.

Posted on Apr 20, 2007

  • david bennett Jan 19, 2013

    I needed to move away from the computer - see Andy's post above....also as per Andy, press the reset button WITH the battery IN

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I've been having problems with this same thing for a while now on and off, it has reset in the past.

I just noticed that when I performed step 3 (move to run mode) and pressed the reset button, I had the watch right next to the chest strap and it synch'd up immediately. Very cool. try this next time maybe you will have success.

Posted on Jul 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the time display


Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all NIKE watch manuals.Rate me, please.

Mar 31, 2010 | Nike Triax CV10 Wrist Watch

2 Answers

Nike triax watch


sounds like the contact inside for the ligt button is stuck on. Remove the back again and take a look at the contact under the light button to see if it is stuck, if so, GENTLY pry it out a bit so it's not touching all the time...
GOOD LUCK

Jan 27, 2008 | Nike Triax CV10 Wrist Watch

1 Answer

Nike Triax Backlight


Usually after changing the battery you need to "ac" it, which means to restart the ic, or else the light will keep on. please check there is a area on the pc board says "AC". all you need to do is use a metal pin to contact it. if it dosn't work then try press all push buttom at same time, it has the same function as press "AC"

Tsai

Jan 27, 2008 | Nike Triax CV10 Wrist Watch

1 Answer

Nike triax speed WR0082 regular


You must Re-Link the SDM pod to the watch after changing the battery. Go to the link below, It's not the exact model, but, should work, if not, go to www.nike.com and download the manual for your model.
GOOD LUCK
http://www.nike.com/timing/extranet/product/triax_elite/elite_manual_eng.pdf

Aug 25, 2007 | Nike Triax Speed WR0085 wristwatch

2 Answers

Can Link watch with Heart Monitor


If you can't link the hrm do as detailed in the following link If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit. Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button. The re-initialisation steps for the Nike C10 and CV10 digital HRM's is: (1) reset the watch (2) open the battery door on the chest strap (3) move the watch to RUN mode (4) press the reset button in the chest strap battery area (5) put the battery back in the chest strap (if it's not already in - it's possible to push the button without removing the battery) (6) hold both of the electrode to create a signal (probably not necessary - it usually links immediately). My suggestion is to use a very thin needle and do it with the battery in the hrm. Eventually, Nike will either eliminate the hard reset or update the manual to include this info.

Sep 16, 2006 | Nike Triax CV10 Wrist Watch

Not finding what you are looking for?
Nike Triax CV10 Wrist Watch Logo

1,474 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nike Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

TIME TRACK SERVICES
TIME TRACK SERVICES

Level 2 Expert

90 Answers

Are you a Nike Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...