Question about JVC Audio & Video Receivers

1 Answer

The 200 disc cd changer, model JVC XL-MC334, gets the cds stuck when trying to spin the carosuel around.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 165 Answers

This is most difficult cause if you are a technician you got to change or clean the optic sensors and put on time the mechanism changer......

Posted on Nov 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My DX-C211 6 disc changer will not play as the discs are slipping on the spindle. In operation the motor lifts up collects the disc and engages with the small balancing plate above it. The motor turns but...


It sounds like the disc isn't getting pushed down to below the little springs on the spindle, can you see the disc spinning at all, I would have a look at the tiny springs and try placing a disc on it by hand and see if there are any problems trying to lock it in place. you will have to take the cover off in order to get at this. Be careful not to touch metal components.

Also does it make any sound while the disc is slipping


thanks

May 01, 2008 | Audio & Video Receivers

1 Answer

I have a pioneer pd-f407 25-disc cdfile changer. A few days ago the changer? or disc grabber at the back quit picking up the CDs . So now when I try to play a CD it says "NO DISC AVAILABLE" even...


The large changers after a few years start to show ware and tare, the gears become worn and because you are dealing with plastic makes them all most impossible to repair. So to answer your question, easier to replace the device.

Dec 31, 2010 | Pioneer Audio & Video Receivers

1 Answer

Hi I have a jvc xl m500 6 disc cd changer and the tray won't open help.


I had the same problem. Out of the blue, neither the single tray nor the cassette would eject. On top of that, it wouldn't change discs or even play the disc in the engaged tray. I then unplugged the unit, moved it to my work table, plugged it back it, and it worked fine.
Last year I had a similar problem with the JVC receiver RX750V that I had bought along with the CD player, probably around 1986--it simply would not turn on. I took it out of the cabinet, and shipped it to a JVC repair shop called BC Electronics, Levittown, PA 215 547-7600. They were very knowledgeable and courteous, but said they could find nothing wrong with the unit, and that the unit worked fine. They shipped it back, and the unit worked fine initially. I found that the problem recurred, i.e. that every so often I'd turn the machine on via the on-off switch, and nothing would happen. If I then unplugged the unit, left it off for a while, and plugged it back in, it would work fine. I then installed an in-line on-off switch on the receiver cord. It now seems to work fine consistently.
It seems that after twenty years, this same problem may affect this generation of JVC components, i.e. that the main power source to the unit must occasionally be cut off.
On the other hand I could be completely wrong and just plain lucky...Hope that helps.

Oct 01, 2010 | Audio & Video Receivers

1 Answer

I have inherited a Sanyo 3-disc CD changer system with radio and tape-to-tape deck. When I tried to put a CD (a copy made on my computer) into the system it would not play, so thinking it wanted a...


i have the same problem and when I opened it I noticed that it wasn't spinning the disc fast enough, if anyone knows how to fix this or if we can just swap the motor please help!!

Sep 17, 2010 | Audio & Video Receivers

1 Answer

CD player fails to read CDs Sharp CD BA150 3 Disc Rotary Charger System : Issue; CDs that are loaded into the trays do not read/play, even though they did previously. Most disks will spin a little while...


This is a typical problem when the laser " eye" gets dust on it, unplug the unit and you can try to remove cover and spray the optical pickup "eye' with canned compressed air or other type of optical cleaner found at say like radio shacks, I have solved many disc reading errors with this method

Jan 25, 2009 | Audio & Video Receivers

1 Answer

I have a Pioneer CD player that is probably about twenty-five years old. It has a six CD holder that fits into the changer. This changer moves the CD's in and out of the player. You can play them in order...


It cycles through the CDs because it can not read any of them. The most common cause of this is the lens falling out. These players have the optics upside down. You load the CDs with the label down correct? The lens is probably floating around inside the unit. Sometimes you can reinstall the lens and the unit is OK. Please use a small amount of clear nail polish to "glue" the lens in place. Anything else will cloud up the lens making the unit junk. If that fails to resolve the problem, the unit may need a ribbon cable or just a complete alignment.

Good luck.

Dan

Nov 28, 2008 | Pioneer Audio & Video Receivers

1 Answer

Hi. Own A Kenwood RXD 653 midi hi fi that's around 8 years old.The problem is it has,mainly,stopped playing cds.Its a 3 disc changer and when i try to play any cds I can hear the disc spinning but the...


It is the laser, If the cd mech is in the top of this one you may just need to clean the lens manually. Cleaning discs are not all that reliable. You can do this by taking the top off and looking at the area where the disc gets clamped to play. The laser has the small glass lens. That is the part you need to clean. Take a Q-tip and wet it very lightly with some windex or some alcohol. Make it so that the Q-tip is just barely wet. Then just lightly rub the lens without pushing on it hard at all. Just nice and easy over the glass lens. Then dyr it off with the dry end just like you did with the wet end. That's it. close it back up again and turn it on and see if it plays. If it still does not play you need a new laser. No other fix for it.

Jul 03, 2008 | Kenwood Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...