Question about TruTech PLV16320 Television

1 Answer

T.v. won't turn on

The red standby light is on but once I turn the t.v. on it goes out and nothing happens. I unplugged the set to reset, to see if that would help. Red standby light comes back on but t.v. will still not turn on. And I have misplaced my owners manuel.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 367 Answers

Open the back of the TV,and look at the can shaped items called capacitors on the board that the power cord is hooked to.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.Most of the time the big black capacitor on the power board goes bad,and bottom bulges out,but sometimes it is the other capacitors as well.I hope this helps.If you have any questions,please let me know.Thank You very much!

Tyler

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung TV not turning ON. My email address is prk Please help... Much appreciated.


Its power supply I will tell you how to fix you need to get few things first

Jan 29, 2016 | Samsung Televison & Video

2 Answers

Vizio vw37l hdtv20a standby light on but wont turn on


you either have a faulty power supply or faulty main board. Vizio power supplies on the older sets are pretty decent. It's usually the main boards that go. These older main boards tend to be pricey so it may be better to buy a new set.

Mar 27, 2013 | Vizio VW37L 37 in. LCD HDTV

1 Answer

I have a 2003 sony kp51ws500 television and there's a timer on the tv and it won't turn on. A red light blinks 6 times then nothing happens. I unplugged, I hit the reset button, nothing happen


read the instruction manual and see how to operate.
if the timer is for to sleep, the problem will be the IC associates with him, you must see the block diagram and w.diagram. and tracking the signal.
go to www. retrevo.com and download the diagram. God bless you

8_1_2012_7_45_05_am.gif

Jul 31, 2012 | Sony Televison & Video

1 Answer

When I turn my ps3 on, there is no audio/video. I don't think it's a software update problem, as I was playing my ps3 about two/three hours ago. I turn it off at the back, chill for a couple seconds, then...


  1. Make sure the HDMI cable is connected to the HDMI OUT port on the back of the PLAYSTATION 3 system. Connect the other end of the HDMI cable into the HDMI Input port of the TV or display monitor.
  2. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive power button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light --> green light --> then back to red light). This will ensure that you have held down the power button long enough to reset the Video Output Settings.
  3. Turn on the PLAYSTATION 3 system and once the system finishes powering up, the Video Output Settings will automatically reset to the standard resolution (or detect the current display output settings of your TV/monitor).

Jun 25, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

No picture but have green light


  1. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive On/Off button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light to --> green light --> then back to red light) This will ensure that you have held down the On/Off button long enough to reset the Video Output Settings.
  2. Turn ON the PLAYSTATION 3 and once the system finishes powering up, the Video Output Settings will automatically be reset to the standard resolution (or detect the current display output settings of your TV/monitor).

May 24, 2009 | Video Game Consoles & Games

1 Answer

AKAI LCT3201AD


Find and replace the following caps, Ec18, 19, 20 / 1000uf/16v,
Ec9, 10 / 1000uf/35v, Ec14, 25 / 470uf/35v should resolve the problem. You can get the caps at almost any electronics supply.
This is a common problem in this unit.
Good Luck!
Happy Thanksgiving!
Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993
premtech@willapabay.org

Nov 27, 2008 | Akai LCT2715 27 in. LCD Television

1 Answer

AKAI 32" LCD HDTV WILL NOT TURN ON


The only solution at this point would be to get the power supply repair since new boards are not longer being manufactured. In about 95% of the time if the LCD doesn't power up or turns OFF by itself or need to be unplug for some time to make work again; those are the symptoms of a dying or defective power supply.
I service these power supplies, for more info write to jah2mil@hotmail.com

Nov 27, 2008 | Akai PDP4294 42 in. EDTV-Ready Plasma...

1 Answer

Ps3 hdmi


Hello. No offense to you but many people do not do the video reset properly. Here are the official Sony directions.


Reset the Video Output Settings. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive On/Off button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light to --> green light --> then back to red light) This will ensure that you have held down the On/Off button long enough to reset the Video Output Settings. Once you turn it back on, it should work fine

If that doesn't work I would reformat your system. (If you don't have a lot saved on your hard drive that can't be replaced) But there are many options under the system setting folder that you can reset or reformat. Other then that I have no idea. Maybe the video port is shorting out.

Hope this helps. Good luck and happy gaming!!

Oct 10, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

When i turn on my ps3 its just a blank screen nothing shows up


Hello. There are a few causes for this. I will list acouple solutions for you.

1. Reset the Video Output Settings. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive On/Off button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light to --> green light --> then back to red light) This will ensure that you have held down the On/Off button long enough to reset the Video Output Settings. Once you turn it back on, it should work fine.
2. If option 1 does not work call Sony because the video out chip has blown or come unsoldered.

I hope this helps. Good luck to you.

Jul 25, 2008 | Sony Playstation 3 (PS3) Console

2 Answers

Emerson AV101 System


I'm in the same boat... happened once before, then came back to life. Now it's back to a red standby light and no ejecting tray

Mar 04, 2007 | Emerson AV101 System

Not finding what you are looking for?
TruTech PLV16320 Television Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73118 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Jason Morris

Level 3 Expert

362 Answers

Are you a TruTech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...