I have the Lexmark x 8350 all in one printer that works fine on the computer it is hooked (Windows XP) but won't print to my other 2 computers (one with XP and the other with Vista). I also have a lexmark Z-42 and a Brother HL-1050 which are both attached to Windows XP computers those both work fine. The code I get from the Lexmark X-8350 is 0x00000d. Any suggestions?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To use a pao88 on Win7 64bit you will need to have Win7 Ultimate, Professional or Enterprise edition AND your computers processor must support hardware virtualisation.
Dowload and install the latest version of XP Mode.
Install the cable in XP mode.
Turn on USB compatibility in XP mode.
Cable will now be accessable in Win7 64bit
I connected and ran a successfull diagnostic test on an old serial modem without issue.
In my travels, I believe the matching brand for this type of architecture makes the best sense and Lexmark would be quicker to support any issues. Best bet is ti go with Lexmark 802.11b Wireless Print Adapter bridge ( 1010042 )
well!! I have an answer for you.your comp is loosing the IP address.first connect your computer via cable then
goto start - programmes - accessories - dos prompt.
type ipconfig.you`ll get ip address,subnet mask,default gateway.copy it.
goto network and sharing center in vista and network connection under control panel in XP,IN Vista,click on view status,goto properties and double click on internet protocol(tcp/ip) or IPv4In XP,right click wireless network connection and goto properties and double click on internet protocol(tcp/ip).type in the IP address,subnet mask,default gateway.in DNS server address type the default gateway in primary DNS and in secondary 184.108.40.206.
your connection won`t drop after this.
Try this, go to control panel and then system. The go to advanced tab and device manager. See if you have any "YELLOW ?'s" fix those that are part of the printer.
You will see your entire computer there. from HDD to Printers.
If no yellow ?'s, then go get the new drivers for the printer.
I also do not know if you defrag on a regular basis or not. That is a "MUST" and at least once a month if your network has allot of usage.
Another item to look at is this. When using the computer, click "CTRL/ALT/DELETE and look at the performance tab. See how much of your computers processor is being used. You may be maxing it out and then you must clean computer up. But, overall it sounds like a driver issue or device management.
Hello: What I would say is: go to microsoft update and make sure you have all the updates for your OS.
Then; read the posting (below) from someone who had the same issue:
stacemarie wrote: "XP SP 3 updates some networking sharing system LAN files that cause some configurations to become unaccessable on the workgrouped networks. We cannot - even ping - the network addresses after installing - so it was an uninstall and do a system restore to get to the original good working state of the clients.
Microsoft needs to come up with a patch to fix this as we are seeing more and more networked clients having these connection and sharing problems."
Do you understand the above?
Let me know if you do not know how to unistall SP3 and do a Restore...
it sounds as if the printer may not be set as the default printer, so check in the installed printers and check and also check that the printer you are sending the print to is the setup one and not a pdf or microsoft office document printer, this is found on the drop down box when the print option appears.
i am also assuming that the printer has worked before from vista to an xp machine as sometimes xp needs a small update to be used with a vista pc on the network