Question about Pioneer DJM-600 Silver Professional DJ Mixer with Auto Beat Cou Home Equalizer

1 Answer

New DJM 600 User

Hi all,

I have just bought a DJM 600 mixer, i have 2, 1210'sconnected to channel 2 & 3, i have 2 dn s3500's connected to 1& 4, now when i'm playing vinyl and the selector is on either ofthe 1210;s channel's ie 2 or 3, and i que up the cd i can hear what i'mplaying through the speaker even tho the selector isn't on the cdchannel (if that makes sense) is this normal?

Sorry i never got a manual as it was 2nd hand

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Get yourself a manual. It will help you. You can DOWNLOAD A FREE COPY of the PIONEER DJM600 INSTRUCTION MANUAL from HERE.

Now, you have to use the CUE button function on each channel to select what you want to hear when you cue things in the headphones. Last, you control the volume of the master cue in the headphones using the CUE volume of the headphone CUE section.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer DJM 600 Master Out 2 Left Side Doesnt Work. any help please?


it could be a few problems,

1 - the left master connection to the board has come away (you would have to open up the mixer to detect this.)


2 - the master fader is faulty (you can tell this by checking your master level indicators are both on whilst music is playing, or tapping the fader.)

My advice would be to have it serviced or if under warranty speak to the store you bought it from. But if you feel confident and know what your doing u can find replacement parts on ebay etc.


Hope this helps a little

Jul 17, 2012 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

When moving the bottom knob on channel 1 and 2 of the pioneer djm 600 mixer there is a slight interference sound coming through the speakers. Channel 3 and 4 are fine


That sounds like you could have some dust built-up on your sliders. Get yourself some dust repellant spray or silicone spray normally found at you nearest computer store. That will definately sort your problem

May 21, 2010 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Djm 500 mixer cf missing and does not turn on does it need the cf to turn on?


no and you can use channel fader of each channel to control the channel without cross fading.

Dec 18, 2009 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Pioneer DJM-600 Bad feedback when i turn up the master volume


It's not your ground wire with the issue, but your RCA cables. Try disconnecting both turntables, and connect 1 at a time, and do the same test, this way you can isolate the problem. Once you've isolated the problem, then you'll need to have the RCA cables replaced on your turntable.

You might also want to check the Cartridges as well. Sometimes a bad cartridge or headshell connection will cause this issue. Worst case scenario, its your tonearm, but that should be test last.

Also, on the rear of your mixer, there is a gain volume pot, make sure this is not maxed out. Keep it about 3/4 of they up. Again, this is on the rear of your mixer where you connect everything.

- OPTiC
http://djproaudio.com
http://djprolab.com

Dec 04, 2008 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Pioneer djm 600


There is a master gain volume control on the rear of the mixer, where you connect everything. Make sure it's not down.

If it's fine, then maybe them being outside caused an issue. How cold is cold? If your talking freezing, then maybe there is some issues with the solder on the pc boards. You'll have to take it to a service center at this point.

I would say, try connecting a CD player to all the channels, and try from there. If it's still the same, then you need professional help.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.

Oct 02, 2008 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

Djm 600


start with connections and try to clean fader with lubricant contact cleaner from radio shack or any electronics store.

Sep 10, 2008 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

PIONEER DJM 600 MIXER KEEPS PEEKING RED SHOWING HI SIGNAL AT LOW VOLUMES


check your input (cables and device)for bad or short circuit cable-bad plug--connection between inner conductor and shield. of the cable(test with new one)------you can disconnect inputs one by one until you find the bad one.and change it.

Aug 27, 2008 | Pioneer DJM-600 Silver Professional DJ...

2 Answers

Pioneer djm-600


the rcas need to be resoldered

Aug 11, 2007 | Pioneer DJM-600 Silver Professional DJ...

Not finding what you are looking for?
Equalizers & Crossovers Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Equalizers & Crossovers Experts

Brad Brown

Level 3 Expert

13542 Answers

Gregg Errera
Gregg Errera

Level 1 Expert

42 Answers

Audio Service Clinic...

Level 3 Expert

924 Answers

Are you a Pioneer Equalizer and Crossover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...