Question about Zanussi 24 in. DE6850 Free-standing Dishwasher
Zanussi DE6850 will complete cycle but wont dry dishes. Any suggestions as to problem/solution? Thanks a million.
I have the same problem if you take off the tray below the front door and set a small blow heater in there it will dry the out the anti flood switch. It usally takes about 25 mins for the machine to start working again.
Posted on Jul 20, 2007
SOURCE: electrolux de 6850 dishwasher
I followed some of the good instructions already on Fixya. I had checked the heater and it was o.k. I then took the front door of the washer apart to get at the control box. Sure enough, I also had the common design fault. One leg of the rely had scorch marks and was now disconnected from the circuit board. I will solder tonight and test. I include a photo of the burned board. TNoel P
Posted on May 08, 2009
remove RHS panel and you will see it bottom right. looks like a round cylinder with wires going into it.
if not heating worth looking at main board as wel for a broken solder joint on heater relay. bit of solder will sort this
Posted on Oct 19, 2010
Tips for a great answer:
Sep 16, 2010 | Zanussi 24 in. DE6850 Free-standing...
May 14, 2010 | Dishwashers
Nov 15, 2009 | Zanussi 24 in. DE6850 Free-standing...
May 07, 2009 | Zanussi 24 in. DE6850 Free-standing...
Apr 12, 2009 | Zanussi 24 in. DE6850 Free-standing...
Mar 13, 2008 | Zanussi 24 in. DE6850 Free-standing...
Feb 21, 2007 | Zanussi 24 in. DE6850 Free-standing...
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: