Question about Washing Machines

1 Answer

Error code e30 - Washing Machines

Posted by on

  • Anonymous Mar 24, 2009

    aeg error e 30

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

It's an error code for the drain pump. Try taking a shop vac to the train pipe to **** out any clog. If that doesn't work, you may have a clog in the filter. You'll need to use a screw driver to unhook the big drain pipe and remove the plastic catch. It's likely full of things like dander and coins that's causing a blockage and preventing the washer from draining.

Posted on Dec 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code e30 error


Hi John, thank you for your inquiry!

If you are receiving error code E30, first check if it is a false error code by resetting the power to the appliance by either unplugging it or flipping off the breaker for about ten minutes. If the error code persists, and based on the symptoms you are describing it could potentially mean a number of things: a pressure sensor issue, defective wiring, faulty pump, and valve assembly problem and/or control board issue. I would recommend reaching out to an experienced appliance tech just to ensure no troubleshooting step has been missed. Parts are often costly and if the problem is precisely diagnosed, it can save you a lot of time and funds. I hope these troubleshooting tips help you in some small way.

Thank you for allowing me to assist you in a small way.

Sep 15, 2013 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Electrolux washing machine error code e30


Hello sreenivasulu, if you are receiving error code E30, first check if it is a false error code by resetting the power to the appliance by either unplugging it or flipping off the breaker for about 30 seconds. If the error code persists, it could potentially mean a number of things: a pressure sensor issue, defective wiring, valve assembly problem and/or control board issue. I would strongly recommend connecting with an expert technician to assist further.

Jul 25, 2013 | Electrolux Washing Machines

2 Answers

I have washing machine hotpoint model wm71n showing error code E30 and washing machine rund for one minute then stops, please tell me what i should do.


Error code E30 generally indicates a problem with the motor.
Check brushes and associated wiring and connections.

Oct 30, 2010 | Washing Machines

1 Answer

My hotpoint washer/dryer keeps coming up with code e30 see user guid and stops washing,what does that mean


Error code E30 indicates motor tachometer failure.
There is a loss of signal during tumble or spin.
Check your user guide.

Dec 12, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Zanussi washing machine zwf1437w error code e30


E30 indicates a pressure system fault. There can be several causes but the most frequent is a blockage in the system.
First thing to do is check the filter on front of machine.
Please do this and report your findings.

Jan 29, 2009 | Zanussi FJS1225W Front Load Washer

2 Answers

Error code e30 see user guide .comes on and stops washing do not have user guide


E30 is a motor problem which is most likely brushes need replacing.
Hope this helps & Thanks for using Fixya.

Jan 18, 2009 | Washing Machines

2 Answers

E30 error code


Error E30 is a motor drive problem. Would check motor brushes as most likely fault.
Thanks for using Fixya.

Dec 16, 2008 | Hotpoint Ultima WD72 Front Load...

3 Answers

Zanussi zwf1631w jetwash front loading washing m/c


had to call an enginer out, the problem was down to a faulty motor rota, to identify if e30 is this fault, rotate the drum (so the motor rotates) and try to start the m/c. if it runs ok you know to change the rota. hope this may help someone

Sep 12, 2008 | Zanussi ZWF1440 Front Load Washer

1 Answer

Aeg 74640 error code e30


What does the E40 error code mean?

Jul 09, 2008 | AEG Lavamat 74640 Front Load Washer

1 Answer

Fault code e30 help


This error relates to the motor drive. Plug off the wall, open up behind, look for broken belt. If the belt is good its the motor brushes. Secure connections to the motor, look for loose wires.....

Nov 13, 2007 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...