Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Washer HAV2558AWW loud noise during spin cycle

Model # HAV2558AWW has developed a loud noise during the spin cycle. Sounds as if something is being "clipped" during the spin.

Posted by on

  • 5 more comments 
  • Anonymous Nov 17, 2008

    Loud noise during the spin cycle. Repairman says it is a bearing in the transmission. The part is cheap but the labor is expensive enough that it may not make any sense to repair.

  • kevinwrainbo Nov 29, 2008

    Anyone have a repair schematic for this?? Thanks!

  • Anonymous Jan 04, 2009

    My Maytag washer made a clicking noise during the spin cycle for a few days and just now shut off completely just before completing the first spin cycle.


  • sparksbug Feb 28, 2009

    I have a Maytag Model MAVT446AWW and just put in a new bearing due to a leak. Now I have the clicking noise during the spin cycle if the tub has a a larger load in it. Larger means more than two or three items. The clicking starts when the spin cycle gets up to its full speed.

  • Anonymous May 22, 2009

    Have similar problem.........Won't agitate or spin ........I'm thinking a bearing kit will solve the problem.......Maytag Washer HAV2558AWW

  • Anonymous Mar 27, 2014

    The water is not spinning out during the spin cycle and the unlock lid button is going off.

  • Anonymous Mar 31, 2014

    occasionally maytag washer off balance during spin cycle

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 367 Answers

Your maytag is really an amana and the bearings are bad. Yes it does cost a lot. If i were you i would buy another washer. Get a whirlpool. (whirlpool now owns maytag)

Posted on Nov 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My maytag hav2558aww wont turn on wash cycle


Possible that the grinding noise comes from the drum, irregular movement or broken paddles.
You can try and attempt only if equipped with a fundamental understanding of the working .
I shall give you some tips to this click 1..: Washing Machine


2. Replacing bearings

Jan 24, 2013 | Maytag HAV2558 Top Load Washer

2 Answers

Wont spin


Sounds like the transmission seal had failed sometime back and has leaked the lubricant causing the transmission to overheat and now possibly seizing the gears, if this is the case the transmission will have to be replaced. Depending on the age of the washer, (5 years or less) you should contact Maytag to see if they will compensate you by way of furnishing the new transmission for free, but you will be responseable for the labor charge from a tech to do the replacement.
If they will not cover the part, you will probably be better off to replace the washer than to invest in the cost of a new trans and labor.
Good Luck !

Mar 21, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Washer HAV2558AWW loud noise during spin


May be the bearing in your direct drive shaft. If washer is a belt drive, the belt could be frayed

Nov 17, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag hav2558aww stopped working. It is full of


Either the fan belt is broken or worn out. Or you need a new motor

Nov 03, 2009 | Maytag HAV2558 Top Load Washer

1 Answer

Make loud noise during spin cycle


Washer may be out of balance, Move closes around in washer and restart

Oct 24, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Washer model LA182 loud while washing.


there should be a belt tensioner on thebelt path check to be sure the belt is not slipping

Aug 14, 2009 | Kenmore 44102 Front Load Washer

1 Answer

Loud noise


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary

Hope it may help you;

Regards;
VOTIT

Jan 29, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag Neptune Series MAH5500BW loud noise during spin cycle.


very loud in spin cycle can mean a bad rear bearing, not something a homeowner would want to try to replace, parts would exceed 6-7 hundered dollars. you may have some extended part warr through the manufacture. still probly gonna be a 5 hundred when the labor is added in

Dec 06, 2008 | Maytag Neptune Washer

1 Answer

Loud Noise during spin cycle


I have a maytag that sounds the same way but washes and spins fine despite all the noise???

May 20, 2008 | Amana NAV2335A Top Load Washer

1 Answer

"howling" noise during spin cycle (still there after changing burned off belt)


Travioso, there was two service flashes out on this model concerning the seal and bearing which means they had an issue with this washer. The howling noise you are hearing is the bearing and will need the new designed triple seal and bearing kit. This should be covered under your warranty, I believe it is 5 years. The numbers for the service flashes are TDL-0048A-B. Call Maytag and inquire about these service flashes, these should be covered. Catriver.

Jul 25, 2006 | Maytag SAV5701A Top Load Washer

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

3,590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...