Question about Uniden 5.8GHz Dual Cordless Phone

2 Answers

How do I switch from my handset to the base speaker?

I want to be able to listen to the caller so everyone in the room will hear.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

While on the call you can press the int'com (intercom) button and the display will say hold/transfer, then you would scroll down to base and press ok. You would then just answer the transfer at the base.

Hope that helps,
81

Posted on Nov 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On the bottom right side of the handset is a button that says speaker. It will not transfer to the base station but does allow for anyone in the same room to hear the phone call or message as it acts as a speaker phone.

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot hear anything on the receiver, nor can anyone hear us


The cable from the base unit to the handset may be faulty or not properly inserted,

Sep 21, 2014 | Aastra Telecom Powertouch/Vista 390 Corded...

1 Answer

HOW CAN I TURN UP THE VOLUME ON HANDSET. VOLUME IS SO LOW CALLERS CAN NO HEAR ME


There is no outgoing (microphone) volume control, if it is only your set try the handset from different extension. The microphone element may have been damaged (especially if dropped) and have to be replaced. Replacement handsets are not hard to find. If everyone on your system claims that callers cannot hear them, there are some settings on the central switch (KSU) which might help, but only after ruling out a problem on your particular set.

Jun 16, 2014 | Nortel Meridian M7208 Corded Phone

2 Answers

Can't find my manual. How do I get the messages off the phone, it's a Magicbox Logan three dect thingy.. Also how do you get a conference call happening?


Hi
To delete messages you need to first listen to them all on your machine via the BASE, then after all the messages have been played (which can be very boring) press and hold the DEL button. It will then ask you to confirm deletion by pressing OK. Not too sure about the conference call as mine does not have it. If however someone else in the same room wants to listen to the caller you can press the handsfree button (speaker icon) on BASE. If you want to speak to someone within your household in another room, you need to press OK on HANDSET, then press down to INTERCOM, press OK again and it will give you several options, INTERCOM ALL (where all available handsets can talk to each other), or HANDSET 1 or 2 to select a specific one. Hope I have helped and it does not sound too gibberish!
Regards

Feb 04, 2011 | Lands Phones

1 Answer

Cannot get a dial tone or hear caller on one of the handsets, but can hear it ring and the caller can hear me. The other handset is fine.


try unpluggjng base unit from power supply and then let handset unit reset to relocate the base unit.

Feb 11, 2010 | Panasonic KX-TG5632 Phone

2 Answers

Heavy Static on phones. Can't hear caller. No caller ID


Room monitoring mode is basically a type of Intercom.


Press the *TONE/exit button on the handset to exit room monitor mode.

I will provide you with link to the user manual of the phone. Have a check at it. Might be useful.

http://www.home-electronics.net/ge/pc/IB/28112EE1_IB.pdf

May 30, 2009 | GE 28112 Trio Cordless Phone

2 Answers

I can hear caller on handset but they cannot hear me?


We just had the same problem with our AT&T 2462 hand sets. They simultaneously stopped transmitting, and though we could hear the caller, no one could hear us on the other end of the line. We unplugged the base from the power source, took the batteries out of the hand sets, waited 20 seconds, then plugged everything back in and they worked just fine. Hope this helps.

May 03, 2009 | AT&T E2562 Cordless Phone

1 Answer

Handset problem


It sounds like you have a defective handset cord or handset. First, at your phone, switch your handset with another phones handset that you know for sure works. From your phone make a test call. If the caller can now hear you, the original handset from your phone is defective. If the caller still can not hear you, switch your handset cord with another handset cord from another phone that you know works. From your phone make another test call. If the caller can hear you, then your original handset cord is defective. You can purchase another handset cord from your local office supply store. Your phone uses a standard handset cord. It may be difficult to match the original color of your handset cord. Be sure to take your defective handset cord with you, so you can try to match the color. If the caller still does not hear you. Put your original handset and original handset cord back on your phone. Then plug your phone in to another wall jack, that you know works with another phone. The other phone needs to be an identical phone to yours (same number of buttons and same model number. The model number can be found under the phone). Wait approximately 90 seconds, sometimes longer, after you plug your phone into the other wall jack. Now, make another test call from your phone. If the caller can now hear you from your phone with it plugged into another working jack, then you have a defective station port or jack where your phone was originally plugged in at. If the caller still can not hear then you have a defective phone.

Nov 19, 2008 | NorStar M7208 Corded Phone

1 Answer

Caller id not working, called tele ph comp they said to change batt, have base unit with one in other room, base one and two not showing caller id, the batt are showing full.


Caller ID information is passed between the first and second rings.

Try connecting a regular corded telephone or a standalone Caller ID box. Does Caller ID information show up?

If you have multiple telephones (I don't mean a single cordless telephone base with multiple handsets) and none of them are showing Caller ID after 3 rings it would appear that the telephone company does not have Caller ID turned on for your telephone line.

Oct 29, 2008 | Lands Phones

3 Answers

Vtech cordless phone appears to be mute


Try the "hard reboot". /1/ Unplug power from base station. /2/ Disconnect battery in each handset. /3/ Wait a few minutes. /4/ Reconnect battery. /5/ Re-plug-in power to base station. /6/ Place handset in base station, and wait a few minutes for it to recover.
You may have to reset time/date and/or the handset ##.

Aug 24, 2008 | Vtech 9009111 Cordless Phone

1 Answer

Caller can't hear my vocie when I use hand set


probly it fell or something the speaker needs replacing

Jan 04, 2006 | Vtech VMix Gz2456 Cordless Phone

Not finding what you are looking for?
Uniden 5.8GHz Dual Cordless Phone Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

98829 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7993 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...