Could not start setup ir2318 software

Using a computer with Internet access, download the files from these WEB sites and create a bootable CD disc to run them.
BIOS Password Reset and Recovery for Laptops & Notebooks http://repair4laptop.org/laptop_and_notebook_bios_password_reset.htmlFaulty LCD screen http://www.cgsecurity.org/wiki/CmosPwd http://techtips.salon.com/step-by-step-instructions-reset-dell-laptop-password-1667.html http://dogber1.blogspot.com.au/2009/05/table-of-reverse-engineered-bios.htm

hi friend

can u see the software reqvariment how many needs ram which windows supports prossesor ie or anyting als see then after try install requaired net connaction or not see the requriment of the software

if not

To repair missing or corrupted system file/s, boot up with the Windows installation CD then - Press R to repair when instructed. Press 1 or Enter to repair the C:\Windows folder. Then type chkdsk /r and then press Enter. The repair process will take quite a long time.

The "Win32 config" system folder and the files within it are crucial to the Windows Operating System's stability. If any of these files become damaged or corrupted, you likely receive error messages. Fortunately, Microsoft puts the files to repair these problems on the installation CD that comes with your operating system. The original install disk offers a quick way to repair the system. Damaged files are replaced in only a few minutes.

Insert your Windows CD into the computer drive. Restart your computer. On startup, look for the message, "Press any key to boot from CD" and press "Enter" on your keyboard. You should see the blue "Welcome to Setup" screen. Click "Enter" on the "Welcome to Setup" screen. Read the "Microsoft Software License Terms," then press "F8." Use your arrow keys, go down and select the Windows installation you want to repair. Press "R" for "Repair." Windows will now start to restore the Win32 System to your computer.

You need to install Microsoft SQL Server Compact 3.5 Service Pack 2 from MS web site:
http://www.microsoft.com/en-us/download/details.aspx?id=5783
Steps:
1. Download installation package from above link and save them to the desktop or other folder
2. Start that .exe and unpack to some folder on your PC (or that same folder)3. Open that folder and run BOTH installations for Windoxs x64 PC - first start:
SSCERuntime_x86-ENU.msi and then
SSCERuntime_x64-ENU.msi
4. This would install necessary SW and then you could re-insert Neat CD to start the installation which would proceed now.

Hi Sheila,

Click on start, click on My computer, then look in the left hand menu for View system information and click on it, click on Hardware, click on Device Manager, your VSM reader should show under Universial serial bus controllers, normally at the bottom of the page. If there is a yellow ? mark next to it, it means the driver has not been installed successfully. If so, double click on VSM reader, click on driver, make sure your software CD is in your cd drive and click on Update driver. Should solve your problem.

If you're trying to install it on a PC, just put disk 1 in the DVD drive and start it & follow the instructions.

If you don't have "Auto Start" then go to "computer" & double click DVD drive icon.
Follow the instructions.

If you have questions reply here.


This is free help...please take time to rate me....good luck.

If it is showing only 14MB then I would suggest trying another SD card.
Good luck