Question about Washing Machines

1 Answer

Wont drain, wont empty, wont go onto rinse, drain or spin during

Cycle wont complete, wont go onto rinse drain or spin during the cycle. When I put the machine to this, it still leaves drum with water in it an allows me to open the door.

No idea where the filter is so if someone is going to suggest that, please tell me where it is.

Zanussi Auqacyle 1200

Posted by on

  • Kingmaria Feb 23, 2009

    wont rinse or empty

  • Anonymous Mar 05, 2009

    fills with water and agitates then cycle stops

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

The filter on this machine is behind the flat at bottom right of machine. Tilt machine back before unscrewing to avoid spillage. If filter is clear get back to me and will explore other possibilities.

Posted on Nov 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine wont drain,rinse,spin,water wont drain out start a cycle but seems not to rinse,spin,drain


Could be a failed lid switch. This is a safety switch that shuts the machine off during cycles.

May 19, 2016 | Washing Machines

1 Answer

Wont adavace after wash cycle like its stuck replying back


Hi just read your posting. The problem appears to be your drain pump is either blocked or faulty.If you would like I can guide you throe the removal of the pump. The reason it does not reach full spin speed is there is still water under the bowl slowing it down.It is impossible to drain the machine by hand completely.Please reply If you require extra help on the pump removal.

Jun 07, 2010 | Fisher Paykel EcoSmart GWL15

1 Answer

Wont spin


Probably down to the water not emptying from the machine in the empty cycle and the machine won't spin because there's still water in the drum. If this is the case, the root of the problem is almost certainly a blocked filter, restricting the draining of the water and not allowing it all to pump out in time during the empty cycle. You probably need to find and clean your filter.

Feb 02, 2010 | Washing Machines

1 Answer

Keeps flashing SE


I recently had this happen but with no error message on my model, the rinse symbol just kept flashing and nothing was happening. I tried running a spin cycle or rinse and spin. The rinse & spin started but stopped when it got to spin. I finally determined that the water was not draining out. I ended up emptying a bucket and a half of water out of the emergency valve near the floor (which spills water everywhere) and found a lint ball that was plugging it. After this I tried running just a spin cycle and it worked.

Mar 30, 2009 | Samsung Washing Machines

1 Answer

Washer will not complete cycle


washer fills up but wont start washing i can turn the knob just passed the numbers and the little marks and it starts washing and when it gets to the rinse cycle it wont rinse but when it gets to spin cycle it spins good

Mar 16, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool calypso model GVW9959K-0 leaking during rinse cycle


hi my name is joyce

Sounds like your pump is leaking. if it is leaking when you are on a spin cycle.
now if it is stuck on f1 cycle and wont drain unplug and let stay unpluged for 60 seconds and replug and see if you can restart on drain and spin cycle. let me know if I can help with any other problems.
thanks
joyce

Feb 06, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

LG WD-8013F wont spin


Hi deppgirl,
I checked the lint filter at the front bottom left hand side and it was full of junk.  Once emptied it worked a treat.  Pull the flap down and turn the large knob anti-clockwise and pull to remove.  Good luck.

Mar 29, 2008 | Washing Machines

1 Answer

LG wft7014pp wont drain rinse nor spin


do you have a drip-dry function...as this cancels the spin cycle unless you select it yourself

Sep 21, 2007 | LG WFT1071TP Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

777 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Brad Brown

Level 3 Expert

15109 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...