Question about Baumatic F60 Stainless Steel Kitchen Hood

1 Answer

Baumatic cooker hood lights not working

Baumatic cooker hood isl94.1, crackling noise then pop, bulbs no longer work but extractor still does. Investigated switch panel circuitry and found that the circuit bulb / lights on indicator light has blown. We think we simply need to solder a new bulb in to replace the blown one but can't find a part number to get a new bulb. Any ideas what power/voltage bulb we need or a part number ? Thanks

Posted by on

  • 2 more comments 
  • sexy beast Nov 28, 2008

    The lights do not work but the light indicator does. All bulbs look ok.fan works.
    Any one know whats wrong?


  • kdang168 Jan 15, 2009

    my baumatic fan extactor not working at all, replace 2 new light bulbs but dont seem to switch on, any answer any body?

  • Anonymous Jan 22, 2009

    i have the exact same problem even down to the crackling and muffled bang but after looking closley at the small circut board in the switching box i noted that it had burnt .

    after repairing the board the red indicator light now works but the lights still do not. i am about to take the fan unit out and check out the electric box on the side. i will inform you if i fix this problem.

  • Anonymous Jan 22, 2009

    i have the exact same problem even down to the crackling and then the muffled bang. after close inspection of the small circut board in the switch box i noted it had burnt. i repaird the board and the red indicator light now works but not the four main downlights. i am about to take the fan unit out and inspect the main electric box and will let you now wen i find out the problem

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 203 Answers

Take the bulb out and bring it with you to store and see if you can find one the same . DIY stores have tons of types.Joe

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix the downlighters on my cooker hood?


sounds more the the switch has failed you

Mar 06, 2016 | Baumatic Kitchen Ranges

1 Answer

How do I reset the clock on a Baumatic 392 range cooker


I am not familiar with that clock but push any 2 of the buttons until you see a change in the clock then press the -+ buttons to set the time try the 1st and 3rd button from left that is how most clocks are set
Geoff Lynn
Stove Recyclers Perth

Jan 30, 2015 | Baumatic Kitchen Ranges

1 Answer

HOW DO I CHANGE THE BUILBS IN MY CHIMMEY COOKER HOOD


Hi Terry,
Kindly check this video that might help you on how to replace that bulb on your machine. Hope it helps.

May 08, 2014 | Kitchen Ranges

1 Answer

Cooker makes popping noise when off


It\'s possible you have a slow leak through one of the rail cocks ( gas taps) lift off the top and spray lightly some soapy water on the end of each of the rail cocks if it bubbles you have found the leak.

Apr 13, 2014 | Rangemaster Classic 110 (Dual Fuel) Dual...

1 Answer

Fix Bulb Holder in Cooker Hood


please see the video attached, and fix it. GOd bless you


Nov 20, 2013 | Kitchen Ranges

1 Answer

Burner not working


Good morning to you
Have you checked the power?
Weather it is on or not as well as cables and plugs.
Some cookers have an automatic thermostat and cuts the power off if things get too hot. then you have to find the bulb (small) which red and push a button beside the bulb and a green light comes on and the cooker is working again.
Enjoy your coffee
kolbrun

Apr 24, 2012 | Frigidaire Kitchen Ranges

1 Answer

Change light bulbs in rangehood


I found the instruction manual on the Baumatic website.
Thanks anyway

Apr 18, 2009 | Kitchen Ranges

1 Answer

When trying to replace my cooker hood lights the new bulbs blow as soon as i put them in. Is there a fuse I could try replacing?


Wouldn't expect a fuse to be the problem with those symptoms.

You need to fish out the old bulbs (that is, the last ones you had that worked for any period of time) and read the ratings off them. You are particularly interested in a number followed by a capital V (so this might be 12V, 120V, 230V or any of a number of others). This is the supply voltage they are are compatible with.

You need to be sure you buy replacements which have the same voltage rating. If your replacements are rated for a lower voltage, they will expire in a blaze of glory the instant you apply power. If they're rated for a higher voltage, they'll glow very dim and yellow.

You have a little more leeway withthe wattage rating (a number followed by a W, eg 15W, 25W). It's safe to go lower (though less bright), and probably OK to go a tiny bit higher but if you go much further than the enclosure is designed for, you risk problems with overheating.

If you're certain you have the right bulbs but the problem hasn't gone away, you'll need to come back with more information. It might help to know: Brand & model of the hood in question, what rating (both V and W) the bulbs are, how long they last, what it looks like when they blow (bright white light, or brilliant blue flash), what it says on the rating plate of the hood, and what part of the world you live in (tells us what the power supply is like).

But my first guess would still be that the new bulbs are the wrong type.

A.

Nov 15, 2008 | Kitchen Ranges

Not finding what you are looking for?
Baumatic F60 Stainless Steel Kitchen Hood Logo

1,627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baumatic Kitchen Ranges Experts

ray gallant

Level 3 Expert

37592 Answers

Jay Plesset

Level 3 Expert

2815 Answers

Todd B

Level 3 Expert

571 Answers

Are you a Baumatic Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...