Question about Sony FD Trinitron WEGA KV-32HS510 32" TV

1 Answer

Sony KV-32HS420 will not come on has blinking standby light

Times are hard, really thought I invested in a solid tv, the best, everyone said, yeah right. Less than 4 yrs old . Turn it on, light blinks and continous to blink without coming on. No money for a shop repair, would like to fix this somehow myself. Wife is on my back hard, 'cause I insisted on the more expensive and "reliable" Sony. Guys I need your help. Any help will be greatly appreciated. Sony KV-32HS420 Serial #4047927

Posted by on

  • 1 more comment 
  • Anonymous Mar 22, 2009

    Same problem as chucke123. Red standby light comes on blinks 6 times then tv goes off. Paid a lot for this tv because it was a sony, but is HORRIBLE. Talked to the people i bought it from, they said there had been many issues with this model and to junk it and buy something other than SONY. WORST TV EVER!!!

  • lmcdaniel001 Apr 22, 2009

    same problem as chucks the service man at sears said it would cost at least $250.00 to 350.00

  • Anonymous Apr 23, 2009

    same damn thing, will come on but hours later so i thought was too cold in the morning since it would turn on at like 2 or 3 p.m. Now wont come on at all except when it feels like it.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Get out your original remote and hold the "Setup" button at the same time as holding the On/Off button on the TV set. It just worked for me!! Thank goodness. I was just about to bring it for repair but there's a snowstorm. Here's the link I got this from: http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--esupportsonycom-perl-tutorial-displaypltutid297templateid1regionid1KSMFlag7370&sliceId=&docTypeID=DT_TUTORIALS_1_1&dialogID=53101564&stateId=0%200%2053105132

Posted on Dec 31, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NLT-37HD1 Tv is not turning on the red standby light keeps on blinking .Before some times started after the blinking of red light and we turned of and on it started after a few attempts . Thanks


Google is your friend. https://www.manualslib.com/products/Nec-Nlt-37hd1-2892043.html

Try unplugging it; often reboots the chip/computer.
This is an LCD TV; often a blinking red light means a projection lamp is starting/trying t? start but in ¥our case it's probably just an old TV.
BTW...a new 4K 65" TV is less than $800 at Costco....

Dec 02, 2017 | Televison & Video

1 Answer

I have a panasonic plasma hdtv which is 3 yrs old wont turn on


7 times blink is a Y sustain PCB defect. Facing TV from the back... its the board on left attached to the upper and lower buffers

Jun 02, 2013 | Panasonic TC-54PS14 54" HDTV Plasma TV

1 Answer

When I turn on my HL-T5687S, the screen remains black and there are 3 dots on the lower right hand side of the panel?


My TV is (same model is doing the same thing). The manual shows that the 3 blinking lights indicate "LED may be defective. Please contact a certified technician."

Note: When I power my TV off (unplug) and back on, the TV's left indicator light is solid for less than a second ("Stadby state") then the right light blinks ("The picture will automatically appear in about 15 seconds") for about 15 seconds. This pattern is repeated numerous times (I think it was 5 times). I believe the TV must be failing some power-on test. Aftere failing 5 times it gives LED may be defective indication.

Nov 09, 2010 | Samsung HL-T5687S Television

1 Answer

Panasonic pt-43lc14 won't turn on


Try checking your lamp door. I have seen a few of these that you need to really wrench that screw down. Let us know.

Mar 22, 2010 | Panasonic PT-43LC14 43" Rear Projection...

1 Answer

My 46-inch Samsung LCD TV screen went black. Audio works.


If you are seeing light then the back light is working. Can you get a menu?Do any of the other video inputs work? If no video but has backlight and no men or any on screen display replace main board.

Sep 13, 2009 | Televison & Video

1 Answer

KV-36XBR400 won't turn on, clicks and blinks.


the power supply is faulty you need check the following

power transistor
rectifier diodes
zener diodes
and fusable resistors, if less than 20 ohms
and your set will come on

Apr 09, 2009 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Tv won,t come on now


i have a kp51ws520 that i just fixed. it blinked 9 times. found out it was the g board. got it done pretty cheap . let me know if you need more info.

Feb 05, 2009 | RCA Scenium D40W20 40" Rear Projection...

2 Answers

No picture or sound - Power Save light blinks red 5 times - nothing on the screen


i also have the same problem with the flashing green light for a while then a different red light starts blinking on and off around 5 times....and i replaced my burnt bulb with a new one...still no picture.

Oct 24, 2007 | Sony Grand WEGA KF50WE610 50" Rear...

3 Answers

Canon s9000


This solution sounded to strange to be real but I was desperate for a solution to the orange light blinking 7 times and getting NO response from the printer whatsoever. It actually worked!
  1. Turn off printer
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the printer should turn off, if not, press the Power button once more.
  8. Your printer should respond as normal.

Aug 17, 2007 | Canon i950 InkJet Photo Printer

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32HS510 32" TV Logo

Related Topics:

1,313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75774 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...