Need nvidia mx400 64m 64bit ddr 4x agp driver

try to download from this site, http://www.nvidia.com/object/winxp_175.19_whql.html

well there is a simple solution but i m not sure if u can handle it,,,,

well if you can then remove ur driver for card and then remove the card,

now boot the system with builtin display and run atleast once,

now after that shut down the PC and again reattach the card and boot the system this time install different driver.

i got the same problem but i fixed it as i suggested here.

Good Luck

hello Juanreyes,

The voltage on the Motherboard of Optiplex gx240 will not support the new card as its limited to agp 2x levels only.

i only see support xp for this chipset

xp video driver NVIDIA® GeForce®4™ MX graphics
64MB DDR if not work then use AGP slot with

supported
AGP Slot: Support AGP V3.0 32bit / 66MHz 4X/8X card

k7mnf-64 manual

which version of age of empires 1 or 2 or 3 check in the system requirements of the game. you can see ur graphics card given there if supported

I found your driver this sight will even check your computer to make sure right one. Larry

http://www.nvidia.com/Download/index.aspx?lang=en-us

Hi uddinarif,
since it is an NVIDIA-card you should download the driver from there (www.nvidia.com)...
Greetings from Germany,
noris017

Accourding to other users that own the 510CMT, once the AGP card has been installed it automatically disables the onboard graphics card. http://forums12.itrc.hp.com/service/forums/bizsupport/questionanswer.do?prodSeriesId=316510&prodTypeId=12454&threadId=1050434&admit=109447627+1213753294488+28353475

From reading post from the link above, the EVO can run only a 4x 1.5v AGP video card and it's picky about this. So if you have an AGP card & it runs both 8x & 4x speed chances it wil not function in the EVO.
Here is a list of AGP 1.5v 4x cards that should function in the EVO:
http://www.google.com/products?q=NVIDIA+GeForce2+AGP+2x+4x+64MB+1.5v+only&btnG=Search+Products&hl=en&show=dd

Good Luck!
Mike

Hi,

Most current AGP video cards are now 8X and they will still work with your motherboard but will just be limited to 4X. Trying to find a 4X might be time consuming whereas using an 8X downgraded to 4x would be comparatively easier and faster.

Additionally most Video cards will work under XP with the appropriate drivers but Vista has a limited list of compatible Video cards.

Hope that this be of some help/idea. Pls post back how things turned out or should you need additional information.

Good luck and kind regards.

you can find it here.
http://www.nvidia.com/Download/index.aspx?lang=en-us