Question about Televison & Video

Open Question

Red snow on my plasma tv

Hello I have an Insignia 50'' plasma tv (NS-PDP50) and sometimes I see like red dots on the screen like snow? they seem to move around and have no particular pattern. I usually see this in dark areas of the screen. And it is not the input device or cable because it happens with all inputs.

Posted by on

  • plazphillips Nov 23, 2008

    I have the similar problem. Red snow appearing like a series of diagonal dashed lines. I've had my Phillips 42PF7320A for nearly two years. Just started since I connected my new blu-ray disc player. I haven't done any tests but I've read other threads on red snow for Phillips plasmas.

  • Anonymous Feb 20, 2009

    I have the same problem on my 50 vizio.

×

5 Suggested Answers

  • 11 Answers

SOURCE: when tv warms up i get red dots in darker areas of screen

what you can do is take off the back pannel and there is a cord on the top of the board that looks like a computer board, there are many boards in the TV but the one I am talking about is twords the bottom where the video jacks plug in to the TV. Ok once you have located the pannel there is a cord on the top kinda tword the right side, it is many wires inside a black covering. What you need to do is just simply unplug it and plug it back in, do this as many times to try to get it to fix the problem.

Posted on Jan 21, 2009

  • 1 Answer

SOURCE: red dots on my plasma screen tv

red and green dots on screen

Posted on Feb 22, 2009

srinivas1515
  • 108 Answers

SOURCE: red, blue and green dots appear on screen like snow

ask ur service provider and ask him to change ur revolution or ask him to change ur sreen

Posted on May 21, 2009

  • 65 Answers

SOURCE: Red Dots

This is know as diffusion. You will need to locate the Vs adjustment inside the TV and vary it up and down by NO MORE THAN 10 volts. If this does not correct the problem then you will need to replace the Plasma panel.

Posted on Aug 14, 2009

  • 8457 Answers

SOURCE: Insignia NS-PDP50 Plasma TV - Remote Sensor failure

Change batteries.Reboot everythings.Tv unplug,replug couple mins later.Ur Directv box,push off/on for new update software.After that sould work.Rate me after u done this.

Posted on Jan 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a insignia ns-pdp50 plasma TV model#ns-pdp50. Product code 50pc3dd-ue.ausdshr. serial# 8d4rmzlo24573. I got a picture on the screen but it will not stay on


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Feb 16, 2017 | Insignia Televison & Video

Tip

Insignia NS-PDP50 Manual Download


Download Insignia NS-PDP50 Plasma HDTV Manual


e43a214.jpg


Have you misplaced your Insignia NS-PDP50 Plasma HDTV Manual ?

Would you like a digital, searchable, pdf version of the Insignia NS-PDP50 Plasma HDTV Guide?

Follow this link (& click FREE) to download a pdf version of the Insignia NS-PDP50 Plasma HDTV documentation.

I hope that helps.
__________________________________

on May 08, 2010 | Televison & Video

Tip

Insignia NS-PDP50 Manual Download


Download Insignia NS-PDP50 Plasma HDTV Manual


e43a214.jpg


Have you misplaced your Insignia NS-PDP50 Plasma HDTV Manual ?

Would you like a digital, searchable, pdf version of the Insignia NS-PDP50 Plasma HDTV Guide?

Follow this link (& click FREE) to download a pdf version of the Insignia NS-PDP50 Plasma HDTV documentation.

I hope that helps.
__________________________________

on May 08, 2010 | Insignia 50 in. Flat-Panel Plasma HDTV

1 Answer

Insignia NS-PDP50 Plasma tv HDMI inputs are inoperative


First of all, make sure that the hdmi BLOCK setting is correct. This prohibits both hdmi inputs and the DVI from working. I didn't even know they existed so I replaced the YSUS board and then I found the settings were my issue all along. If the settings are correct then the most likely culprit is the YSUS board part number: BR36223601. It is a compatible card for your TV. There are several suitable subs for this board and it is a snap to replace. I found a like new board that works better than my original board for only $25.00. The heck with those rip offs for prices up to nearly $300... Good Luck.

Jun 04, 2014 | Insignia NSPDP50 50 in. HD-Ready Plasma TV

1 Answer

My insignia plasma tv has the LED light blinking red twice, help?


Hard to find parts sometimes for this brand---I would begin with the power supply by looking first at the filter caps:


12_3_2012_11_30_38_pm.jpg12_3_2012_11_30_58_pm.jpg

Dec 03, 2012 | Insignia NS-P501Q-10A 50 in. HD-Ready...

1 Answer

Capacitor supplier for 50 inch Insignia Plasma TV


if you are looking for a capacitor
check this site www.digikey.com

Aug 30, 2012 | Televison & Video

1 Answer

We just bought a NS-PDP50HD-09 Insignia 50" plasma


Although we would not be able to assist you with power issue you're having with your TV, I can assure you that the issue with your new HD Insignia TV not turning on has nothing to do with the DISH Network receiver you have connected to it.

Phillip Chang
DISH Network Customer Service Representative

Feb 14, 2011 | Insignia 50 in. Flat-Panel Plasma HDTV

1 Answer

Insignia ns-pdp50 plasma. pop of death, audio but no video


I suspect that your supply has gone bad. You will need to find the service manual for voltage measurements. If you want to get replacement boards many can be found on ebay or you can check www.shopjimmy.com they stock boards for many units and I have had no problems.

May 04, 2010 | Insignia NSPDP50 50 in. HD-Ready Plasma TV

1 Answer

I purchased this hdtv new from Best Buy in February 2008. Last week a crackling sound began to develop and now the sound has gone completely, although the picture is fine.


Insignia T.V. 50" Model; NS-PDP50, Plasma T.V.

T.V. comes on, there is sound but no picture.
T.V. is les than 18 months old. We use the T.V. when we come to our Condo in Daytona Beach for vacation, so it hasn't been used very much.

Jan 10, 2010 | Insignia LCDTV26 26 in. Television

1 Answer

Insignia NS-PDP50 Plasma TV - Remote Sensor failure


Change batteries.Reboot everythings.Tv unplug,replug couple mins later.Ur Directv box,push off/on for new update software.After that sould work.Rate me after u done this.

Jan 02, 2010 | Insignia NSPDP50 50 in. HD-Ready Plasma TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...