Question about Jenn-Air PRG3010 (NP) Gas Kitchen Range

1 Answer

Burner not working

I have a Jenn-air range and one of the burners is not igniting when I use the controls. It still makes a clicking noise but no flames. It will work when I use a match.

Posted by on

  • spaeth7 Feb 14, 2009

    I have the Jenn-air prg3010 gas range. The front simmer burner will not ignite. For a few weeks it would click and if I lit it with a match and a short time later tried with the control, it would light. BUT, after a while it wouldn't even click and the only way is to light it now is with a match/lighter. The other 3 burners ignite perfectly. Cleaning around the igniter did not solve my problem. Range is 4 yrs old and I can't afford to call in a repairman. Any ideas please?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Sometimes there is "leak" on the cable - the insulation breaks down some place else some the clicking sound is heard but no lighting. Look to see if the arching is at the electrode beside the burner - if it is then try cleaning the electrode and the areas around the burner so as to give better conduction to thr frame o the stove

Regards

Posted on Nov 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Burners light but ignition keeps clicking


use a blow drier to dry the igniter and knobs.

May 21, 2014 | Jenn-Air Kitchen Ranges

3 Answers

When I turn on a burner, all the other burners click like they are trying to turn on as well. The clicking is continuous and really annoying! Thanks for your help! Tammie


Anytime you turn on a gas range all burners click for safety reasons. If a knob has been turned by mistake the gas lights to prevent gas from escaping into the room. If you turn the control knob past the LITE position after the burner lights you should be OK and stop the clicking. If the clicking continues regardless you have a defective ignitor switch that must be replaced.

Aug 26, 2009 | Jenn-Air JGR8850 Gas Kitchen Range

1 Answer

How to replace spark igniter - Jenn-Air SEG196 gas-electric range


took off the knob to the ignition system to clean and spray got onto the ignition under the dial and now the two front burners won't ignite unless I turn on one of the functional back burners then turn on the front burner. How do I repair this?

Jan 22, 2009 | Jenn-Air JGR8850 Gas Kitchen Range

2 Answers

Igniter of back burner dies not click or light


I had the same issue with washing the top with water and cleaning solution. I had arching, eventually one burner failed to ignite. I tried the above solution and it did not work. Remove the ceramic top on the burner that will not ignite. Turn on another working element. Do you see the igniter working?

If so slowly turn on the gas on the failed burner and it will ignite. I'm looking into what component automatically controls the igniting and gas release when the knob is turned on.

Dec 22, 2008 | Jenn-Air JDR8895AAS Dual Fuel (Electric...

1 Answer

Jenn air pro range 36" prg3610np


hi after the burner ignites turn knob until it stops trying to ignite thanks

Jan 07, 2008 | Jenn-Air PRG3010 (NP) Gas Kitchen Range

2 Answers

Problem with Jenn Air Gas Range???


are you talking about the burners or the oven reply with model num and dont rate me till we are finished

Jan 02, 2008 | Jenn-Air JGS8750 Gas Kitchen Range

2 Answers

All the Burners click when I just turn on 1 knob


The manual tells you this will happen. Just adjust the flame for your intended use and start cooking

Dec 01, 2007 | Jenn-Air JDR8895AAS Dual Fuel (Electric...

1 Answer

Electronic Igniter


If it is only happening with one burner, the switch on that valve needs to be replaced. If it does it with all the burners it is a problem with the spark module or control.
Post back if you have any questions.

Nov 17, 2007 | Jenn-Air JGR8850 Gas Kitchen Range

Not finding what you are looking for?
Jenn-Air PRG3010 (NP) Gas Kitchen Range Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

958 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...