Question about Dynex DX-E401 Router

3 Answers

Reset and setup help on dynex dx-wgrtr wrireless g router

Ok i have the dynex router dx-wgrtr wrireless g router. i have had 1 computer fopr a long time set on a secured network to automatically log in. i need to set a couple more now and cant remember the password.

i need to know how to reset either the password reset or the whole unit. if i reset the whole unit, how do i set up back to being secured with new name/password?

then i need to get a port open for a program folding@home.

Posted by on

  • xsqzet1ne Dec 17, 2008

    i have the same problem its no authenticating

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi guys, I have the same router and I had the same issue. I just figured out how to fix it. All you have to do is access the mac ip address and it will give you all of the information that you need. It will show you your old password (which you can reset if you want), also it lets you access all of the settings on the Dynex router. The mac (ip) address for this router is http://192.168.2.1/. I recomend righting this (along with your password) on the router itself with a sharpy (marker) so that you can find it quickly in the future if you have the same problem. Godd luck, I hope this helps you.

Posted on Mar 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have this problem iam tyring to setup a password so my network is secure but iam haveing problems do so i need a solution

Posted on Mar 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

My laptop is connected with g dynex router but i have no internet service i have excellent connection signal throw unsecured line

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect a dynex (dx-e402)router to linksys (befsr41) router


Configure the dynex on another computer that is not connected to the linksys router.
Assuming that your linksys is currently setup as 192.168.1.1
Turn off DHCP on the dynex and setup the IP to 192.168.1.2 subnet mask 255.255.255.0 gateway 192.168.1.1
use a cross over cable and plug each ends to the LAN port on port routers.
you should now be able to ping 192.168.1.2 (dynex router) from your other computers on the linksys router network.
any computer that is connected to the dynex should be able to get a dhcp address from the linksys router.

Mar 01, 2011 | Dynex 4-Port Ethernet Broadband Router...

1 Answer

When i connect my modem directly to my computer i get internet access. when i connect to my dynex router, i get no access on my computer or xbox


You can go here and download the quick setup guide and manual for your router http://www.dynexproducts.com/products/computers/DX-E402.html which will walk you through the setup.

The most common reason it won't connect is that you must have the router's IP number (the one listed as default IP in the manual) set as the GATEWAY address on your computer network settings and your xbox settings, otherwise they can not talk to the router.

Feb 18, 2011 | Dynex DX-E402 Router

1 Answer

I have the dx-wgrtr dynex wireless g router and i can't get it installed on my computer, I have the disk but it won't start.


There an option to manually configuration for the router.
You'll needing to connect your computer to the LAN port of router, connect the modem to the WAN / Internet of the router. Access the configuration page of the router (example 192.168.1.1) then run the wizard and follow the step by step to configure your router.

Apr 07, 2009 | Dynex DX-E401 Router

1 Answer

Dynex-e402 change nat settings to access x-box live


Dynex DX-E402 router, changing NAT settings(UPnP) to access x-box live. go to router settings web page for router, http://192.168.1.1/, enter user name and password to access settings page. user id is usually admin this also for password. under advanced settings click on forwarding. In listed sub-catagories click on UPnp. click enable. this should solve any NAT issues with X-box 360 signing onto x-box live. dynex dx-e402 was very easy to setup.

Mar 24, 2009 | Dynex DX-E401 Router

1 Answer

Dynex DX-E401 Router setup


Here is the manual, and it states that to get into the router you use admin as the user name and password is blank. I would suggest that you reset the router. The reset button is on the back next to the power connector. Use a paper clip and push the reset button in for about 30 seconds till the lights flash. Then you should be able to log into the setup page and set it up .
http://www.dynexproducts.com/skins/skin_1/Topics/Documents/DX-E401_Installation%20Guide.pdf

copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Dec 14, 2008 | Dynex DX-E401 Router

1 Answer

Cannot use more than 1 computer with my 5 port router


Start with buying a router. The Dx-ESW5 is a 5-port switch, not a router. http://dynexproducts.com/t-faqs_dx_esw5.aspx

You could make it work, but you'd have to assign IP addresses to each of the machines connected to the Internet. For security and a number of other reasons, it's quicker and easier to just grab a router on sale at your local office supply place for $30 bucks or so.

Carl

Nov 11, 2008 | Dynex DX-E401 Router

1 Answer

Dynex mtu


Browse to the router's setup page and in Basic setup you will see MTU, change it from auto or default to 1500.

setup page address is 192.168.2.1,

Look under basic setup page.

Please remember to rate all Techs who assist you for free :) Good luck, Joe

Sep 30, 2008 | Dynex DX-E401 Router

Not finding what you are looking for?
Routers Logo

Related Topics:

2,315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Routers Experts

Willem.
Willem.

Level 2 Expert

345 Answers

Richard Finch

Level 3 Expert

397 Answers

CKsystems

Level 2 Expert

72 Answers

Are you a Dynex Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...