Question about Kitchen Ranges

1 Answer

Whirlpool Accubake - Can't get out of clean mode

I have a Whirlpool Accubake self-cleaning oven. One day when we were trying to bake food, the oven door locked and the temperature rose to it's maximum - the panel indicated that it was in bake mode and set at 375 degrees.
Even after unplugging the oven for 1 hour (several times) the oven still goes into what appears to be the cleaning mode; door locked and maximum temperature.
I managed to unlock the door by pushing the lock lever with a screwdriver. The oven continued to maximum temperature.
I completely unplugged the control panel - turned the electricity back on with exactly the same results - oven goes to maximum temperature (top heating element only).
Disconnecting the temperature sensor gave the same results.
What do I do next????

Thank you.

Posted by on

  • lsduquette Jan 23, 2009

    The exact same thing has happened to our whirlpool accubake oven tonight. It is 5 years old.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Cannot get out of clean mode, although the oven outside is cool, but door is locked and display still says cleaning, door locked and time of 3 hrs 15 min is displayed. NOW WHAT?

Posted on Nov 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why the off switch, temperature control dial, timer do not work when baking?


could be that it knows it is already being used and locks all controls until the timer runs down .

Feb 14, 2016 | Whirlpool Gold GGE388LX Double Oven...

1 Answer

Whirlpool oven keeps heading up


What is the model number of your unit?

Jun 26, 2013 | Ovens

1 Answer

When I was using the stove...the door locked and F-3 showed up what happened


it sounds to me like you have a self cleaning oven and may have somehow gone into the cleaning cycle

Oct 07, 2012 | Whirlpool Accubake RF362LXTT Electric...

1 Answer

Started the clean cycle but remembered that I wanted to remove the oven racks and quickly tried to turn off the oven but the door had already locked - now I can't get it to unlock - what happened? This is...


It can take 4 hours to complete. I also see that many people have problems with the temperature sensor "Blowing" after they use that function. When you do the clean special door interlocks activate and the oven heats up to like 900 degrees!

Feb 18, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

When baking my oven door is not locked is it supposed to be?and if so how do we lock it.


The locking of the oven door is a safety feature used only during automatic self cleaning cycle, this is because temperatures during the self clean cycle can reach upwards of 600+ degrees creating a dangerous situation if the door was opened, it will remain locked after the self cleaning cycle is complete until the oven interior temperature is below 100 degrees. So no the door is not normally locked during the bake cycle. Good luck !

Nov 26, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Oven clicks to self cleans or f3, the door locks and food burns


Replace the oven temperature sensor.
Take your model number to any appliance parts store for a replacement sensor.

Apr 20, 2009 | Whirlpool Accubake RF362LXTS Electric...

2 Answers

I get a E0 -F2- error code on my whirlpool Accubake GR450LXH2 ran


That mean that the key pad is shorted,needs replaced

E0-F2 Shorted keypad Replace Electronic Range Control/Clock (ERC)
Or
E0-F2 Oven temp too high
1. Test operation of door lock on self-clean models
2. Test relay contact operation
3. High resistance in oven temperature sensor

Jan 13, 2009 | Whirlpool GR450 Electric Kitchen Range

1 Answer

Oven wont work after self clean


I have a Whirlpool MOD. RBS275PDB17 single electric self-cleaning oven; although the manual is generic, it specifies, "When the cycle is completed and the oven cools, "End" will appear on the lower oven display and "LOCKED' will disappear" and "To Stop Self-Clean any time: Press UPPER/OFF, LOWER/OFF or OFF/CANCEL. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools." Has your oven had time to cool?

Jun 13, 2008 | Whirlpool RBS275PD Electric Single Oven

1 Answer

GE Profile XL44 Spectra gas oven


try to hold down the light switch on the door set it up for another cleaning hit start when oven clean door lock showes hit cancel if that doesnt work try unplugging it for three min fyi the doors can take up to an hour to un lock after cleaning its so it dont burn your face off from the intense heat after cleaning some take 2

Feb 14, 2008 | GE Profile JGS968 Gas Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

605 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

paulcarew

Level 3 Expert

2364 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...