Question about Belkin PC Desktops
Just look on the back of the router and find the reset hole. It's small and you'll need a paperclip to put in the hole but you must unplug the router first then put the paper clip end into the hole and hold the button down while you plug in the router making sure you hold the button for about 20 seconds. Now you should have a reset router.
Hope that helps,
Posted on Nov 15, 2008
Tips for a great answer:
Jan 01, 2013 | PC Desktops
Jun 04, 2011 | PC Desktops
It is usually easiest to run the install wizard, but be sure to be ready to set the items listed below.
Things to set:
Note: Routers are intended to be set by geeks. You have to SAVE EVERY page, or the changes will be lost. A geek knows this (apparently). The router gives no protest...just dumps your changes.
1. Login password (RECORD THIS!!). Consider taping to bottom of the router. Physical access is not the security issue.
2. Set a recognizable system ID.
3. Invoke wireless security of at least WEP.
a. Assign your own access code, 10 digit home or cell #. Consider taping to bottom of the router. Physical access is not the security issue.
4. Check that your router is set to broadcast its' presence.
Oct 23, 2010 | PC Desktops
Sep 04, 2010 | PC Desktops
Oct 16, 2008 | PC Desktops
Sep 30, 2008 | Belkin PC Desktops
Aug 23, 2008 | PC Desktops
Aug 22, 2008 | PC Desktops
Aug 07, 2008 | PC Desktops
Jul 03, 2008 | PC Desktops
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: