How to Remove IR400 Dept. ID and Password

My copier is not able to operate because of Dept ID and password. So, can you suggest ways to remove the Dept ID and Password?

How can I remove the Dept IDS and password?

You will have to reset/clear the password. This WILL REMOVE all passwords setup in Dept ID Management. Go into Service mode by pressing the Additional Function key, then the 2 & 8 pressed at the same time, then Additional Function key again. Press COPIER on display, then Function ( across the top ), then CLEAR, PWD-CLR, Then Ok. You may also use the arrow keys on the display to get to PWD-CLR. Then the RESET key or maybe power down the equipment.

I'm afraid that you have to know the id and password. They can only be erased after going into service mode and using the password clear option.

you can reset Dept.id and password.
press additional function and then 2 and 8
now go to clear
clear password and restart machine.

oday I start my printer canon ir 2520 and i see dept id and password prompt screen, I did not reset any id and password earlier, I cannot go inside the menu or i can't take any copy. Please give solution for disable or reset the same.

go to additional functions, system setting's , dept codes and turn them off. if you do not know any dept code's you can reset thru service mode function clear.

try this : press * with head press the custom setting browse it you will find to activate dept code then you need to have dept code id then password for ex.dept code id -0001 password 9999 you need to enter this two info to open the copy functions hope this will help

press id button

Dept. ID is activated that is why it is asking you to enter it. If you are not needing the function you can ask the local service provider to check the settings of your machine.