Question about Alpine CVA-1003 Car Video Player

2 Answers

Problem with video no picture

I have a problem with the aux it read video off for safety, even after running the yellow and blue wire to ground.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: problem with video no picture

Have u tried running the yellow wire to the brake wire. it is suppoesed to have some power whe n u press the brake. both wires can;t be grounded.

Posted on Jan 26, 2008

Re: problem with video no picture

There are 4 wires a yellow and blue then theres a yellow and black and then theres a pink and black wire so wat do i do

Posted on May 21, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer


I Had to read your post several times to determine your problem. I think that you are saying that the screen displays," picture off for your safety". If this is the case, you need to ground the parking brake wire to view video.

Sep 12, 2012 | Alpine CVA-1003 Car Video Player

1 Answer

Colour codes for 83 corona, wiring stereo the colours are grey/black grey/red Brown Purple/green Grey Blue/yellow blue white/black any help would be great thanks!

Hello! I'm having a hard time reading your colors...So, I'll give you the 1983 Corona wiring...


Constant +12= Blue/Yellow Switched +12= Gray
Ground= Brown Antenna= Black/Red
Illumination= Green


FR+ Light Green
FR- Blue
FL+ Pink
FL- Purple
RR+ Red
RR- White
RL+ Black
RL- Yellow


May 30, 2010 | Pioneer AVH-P5700DVD Car DVD Player

2 Answers

How to install a iva-d310 from alpine

The yellow/black wire is for the foot brake and the yellow/blue is for the parking break. These wires need to be hooked up in line with the pinch connectors to the correct wire. The yellow/black wire needs to hook up to the wire to the foot break lead wire before the switch and the yellow/blue needs to hook up to the lead wire before the parking brake switch. This is a sefty feature to deactivate the video display because it is illegal to have video in the view of the driver while the vehicle is moving. These wires are used to tell if the car is stopped.

Dec 06, 2009 | Alpine IVA-D310 Car DVD Player

2 Answers


the 9101 is built so you cant bypass

May 08, 2009 | Audiovox VM9512 Car DVD Player

2 Answers

How do i by pass the parking brake no video

Well on the eclipse unit you just ground the wire for the parking brake

Jan 09, 2009 | Dual XDVD8181 Car Video Player

1 Answer



Depending on the vehicles wiring itself, Alpine uses the below color coding for its wiring:
yellow – constant +12v such as the positive battery terminal
red – switched 12v such as the accessory terminal of the IGN switch
black – ground which could be the chassis/body ground of the vehicle or the negative terminal of the battery
blue/white - remote trigger for add-ons such as a power amplifier
blue – will activate a power antenna (if present)
white and white/black - front left speaker + & -
grey and grey/black - front right speaker + & -
green and green/black - rear left speaker + & -
purple and purple/black - rear right speaker + & -
orange/white - reverse wire
white/pink - monitor control lead
pink/black - audio interrupt from mobile/cell phones
yellow/blue - parking brake
yellow/black - foot brake

To bypass, the yellow/blue must be triggered negative/grounded. Alternately, it may be easier to use an adapter such as a Peripheral PTR7 ( In some regions, it is not allowed to operate this unit while vehicle is in motion.

Hope this be of help. Pls post back how things turned up or should you need additional information.

Good luck, kind regards and drive safe.

Jan 10, 2008 | Alpine CVA-1003 Car Video Player

12 Answers

How do i bypass the emergency brake wire on a dual xdvd700

Just ground out the Ebrake wire... it will work fine then. Even if you just link the ground and ebrake wire together and ground them together it works!

Dec 01, 2007 | JVC KD-AVX33 Car Video Player

1 Answer

Poblems with grounding!

i grounded the yellow and blue wire to my fog light ground wire, everytime that happens...i just flip the fog light switch twice and it works again =D

Nov 26, 2007 | Dual XDVD8181 Car Video Player

5 Answers

How do i by pass the parking brake no video

1. AUDIO CD METHOD (Permanent)
** Insert Audio CD
** Press PLAY
** Press STOP twice on remote
** Enter 26604 on remote
** Press ENTER
** Take out Audio CD and Insert a DVD
Credit: Myself via a DUAL Tech


2. DVD METHOD (Permanent)
** Insert a DVD
** Let it play until you hear sound
** Press STOP twice on remote
** Enter 26604
** Press ENTER
Credit: Adam P.

The blue warning screen should immediately go away after pressing the last digit of "26604." Still press ENTER as a precaution.

From here:

Oct 09, 2007 | Dual XDVD8181 Car Video Player

Not finding what you are looking for?
Alpine CVA-1003 Car Video Player Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Video Players Experts

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 3 Expert

56836 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Alpine Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides