RCA F32649 32# TV Troubleshooting Forum

if your model is too old , you will not find it. however download your instruc. manual from www.fitness.manualsonline.com or www. retrevo.com and looking for the instruction.

God bless you

Tries the PS3 with another tv?Make sure is not the PS3.Tries go into the tv menu to do tv audio resetting,so it can go back to factory setting,see if that make the PS3 it responses.

need rca ---wires yellow, white, red -- match the output of the DVD player to the inputs of the tv, or have one the kids do it for you.

Check your connections to the TV itself to make sure they are properly hooked up. Once this is done, turn off your PS3 completely. Turn the PS3 back on using the touch button on the front, BUT keep your finger on the button until you see something on your screen. This will reset your video settings back to 480i which will work on any tv/monitor and should allow it to auto detect the HDMI option again.

If this doesn't work, you may want to make sure that your HDMI/AV/COMPOSITE settings and inputs are working correctly on your tv. You might want to try and plug something else in for full testing purposes if the above does not fix your issue.

It is possible that the RCA cable is no good. The yellow = video, the red and white = audio. The input on the TV may be bad, try switching from one input on the TV to another if you have one available. Even if you don't have a free one, remove a DVD player or something else that may be hooked up and try to hook up the Playstation to that input using those RCA wires. This way you can eliminate the port and the wire being bad at the same time. If all else fails and the PS2 works on other TVs, the only option left would be a problem with the TV you are trying to hook it up to. I have that problem on one TV I own, one of the RCA inputs (input 4) is no good. I hope this helps.

U can't hook the satelite signal to the PLaystation 2.The satelite hook up to the main in the Antana input.The playstation 2 must use the RCA cable came with the Playstation 2 hook up in any Audio,Video in put in the the tv.Tune in what input u hook up like 1,2,3,extra..use ur Playstation 2.

Hi,

I am assuming that your TV has Video IN source selection.

You need to use the Video/Audio OUTput of the VCR/CD and connect them to the Video/Audio INput of the TV. To do this you would have to use a 3-wire shielded cable with male RCA connectors color yellow, red & white.
RCA male connectors, yellow is usually video, red/white is audio left/right.

as shown OUT of VCR/CD to IN of TV.

Pnce done, play the VCR/CD with a good known CD or tape and set TV to Video mode.

Hope this be of help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

It is possible that while programming the remote you got into the menu on your TV and adjusted the color control. Go back into the menu and find the controls for color, contrast, tint and etc. If the color bar is all the way to the left, then adjust it to go to the right until you get enough color. This is just one possible solution. Hope this corrects the problem.

try removing your vcr and dvd connections first while watching TV programs alone!. if still there are no colors then your tv have a problem!

You can easily buy RCA conectors and splice them. Remove the 1/8 plug from the speakers and strip the ends and add the RCA connector. I am not so sure of what it would sound like but the ohms may be different.