Question about Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
I can't find my owners manual and can't remember how to set up my hoover steam vac for apolstery cleaning.
Hoover Steam Vac F5853-900 Series 17.9
Remove the tank front panel by sliding it straight up. Replace panel with converter (located on end of hose, end is shaped like front panel that you slide out.Before connecting tube to cleaner, make sure black tabs are extended by pulling tan collar roward tube.Open door on hood labeled "Stair/Upholstery Cleaning Connection" Press round solution tube connector onto round projection inside door. Press connecator collar down firmly to ensure that it is fully connected.
When the solution tube is connected to the deep cleaner, the nozzle brushes will automatically be turned off and will not rotate when the deep cleaner is turned on even if the speed selector is in the HI oar LO position. For full suction, it is important that the recovery tank lid is properly secured before cleaning.The tank lid is replaced in a hinge-like manner. Position front of lid under tabs on front of tank. Rotate lid down onto tank. Make sure lid is secure on all sides before cleaning.Hope this helps.
Posted on Dec 06, 2008
Tips for a great answer:
Jun 10, 2014 | Vacuums
Jul 08, 2010 | Hoover Steam Vac Dual V w/ SpinScrub...
Jun 09, 2010 | Hoover F5906-900 Upright Steam Vacuum
Apr 06, 2010 | Hoover F5505 SteamVac Spot Vacuum
Nov 28, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
Jul 17, 2008 | Hoover SteamVac Carpet/Upholstery Deep...
Jun 02, 2008 | Hoover SteamVac F5914-900 SpinScrub...
286 people viewed this question
Usually answered in minutes!