Question about Lexmark Printers & Copiers
I read the Lexmark guide. It says that to began printing, you must remove a sticker and a transparent tape from the bottom of the ink cartridges. My question is " how do I remove the cartridges to check to see if the cartridges are correct"?
Posted on Dec 07, 2008
Please follow the directions outlined here at the Vista add a printer site.
Here's a beginner's guide
If you have had problems with the wizard, please follow the steps in this article. and go to the Lexmark site for drivers here
Between those four links, you should be able to get the printer installed.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread. If I've managed to answer your question or solve a problem, please take a moment to kindly rate this post....thanks!
Posted on Apr 03, 2009
You can get the drivers here.
Posted on Nov 05, 2009
SOURCE: i need driver for x73 for vista
Sad to say, there is no Vista driver for this printer, installation disk notwithstanding. See:
Note: No Vista driver, but you might be able to use in XP emulation mode.
Posted on Nov 08, 2009
i'm having the exact same problem.... a person (from another forum) said that Lexmark will not update the driver for such an old printer. now i need to buy a new one =(
Posted on Jan 04, 2010
Testimonial: "Thanks for this - at least I know now. Lexmark have not replied to my emails!"
Tips for a great answer:
Mar 06, 2013 | Printers & Copiers
Nov 05, 2011 | Lexmark X73 All-In-One InkJet Printer
Nov 08, 2009 | Lexmark X73 All-In-One InkJet Printer
Oct 04, 2009 | Lexmark Printers & Copiers
Aug 29, 2009 | Lexmark X73 All-In-One InkJet Printer
May 24, 2008 | Lexmark Printers & Copiers
May 24, 2008 | Lexmark X73 All-In-One InkJet Printer
56 people viewed this question
Usually answered in minutes!