- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It should take about 45 minutes to an hour to properly descale the machine. If it only took a couple of minutes you really didn't descale your machine. If you used the powder it has to disolve completly before descaling. The best way to descale is with the descaler in the tank. Turn on the machine and run about 8 ozs of water-descaler through the wand and then turn off the machine. Wait 10 minutes and repeatthe last procedure. Do this until the tank is empty. When done with the descaler, rinse out the tank and put fresh water in the tank and run the whole tank through the wand. Then fill the tank and your ready to go.
1. place water and descaler solution into tank 2. remove milk frother from arm 3. place a jug under steam arm 4.hold down the button 2nd from the right next to the menu button for a few seconds. 5.descaling machine open steam knob will appear on the display 6. after descale has finished "fill water tank" will appear. 7. refill tank with clean water no descaler 8.press the button 2nd from the right as in step 4 9. rinsing machine will appear. 10. when finished"close knob"will be displayed 11. refill water tank 12. ventilate will appear on the display 13.press the hot water button and allow to run 14.ventilate will disappear,warming should be displayed. 15. job done !!!
bad chip get if repair my friend good luck.to verify keep it unplug for some days then replug back.but since the posing of this article,you can plug it now and lets see what happens.if it does what it do again call a tech.your machine has a bad chip if it is the embbeded chip buy a new machine.good luck my friend