Question about Visteon HD Pulse HDT200 Satellite Radio Receiver

Open Question

HOW DO WE SET THE TIME CLOCK ON OUR HD Pulse radio?

How does one set the time on an HD Pulse radio?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the time on a RCA USB Charging Clock Radio RC142?


Setting clock manually
1. Press and hold Set Time to enter the clock setting mode.
2. Press HOUR+ and MINUTE+ to adjust the time.
• Press and hold to adjust the time value quickly.
• The digits on the display ? ash in clock setting mode.
• The clock is in 12 hour format. The AM or PM indicator will illuminate to indicate the current time setting.
3. Press Set Time again to save the time setting

RCA RC142 User Manual General Controls

Mar 18, 2016 | RCA RC142 AM/FM USB Charging Clock Radio

1 Answer

How to set the time on an HD 1688 Quartz wall clock


When you put in a new battery, the hands advance to the hour and stop. It then waits to receive a radio signal and sets the time.
to do a manual set, insert the battery and hold down the M button until the correct time. Don't go past it or you will need to continue until it comes up again. There is no reverse.

The previous answers don't fit the HD-1688 Sheng Bang clock mechanism that I have.

Mar 22, 2012 | Audio Players & Recorders

1 Answer

How do i set a radio controlled clock seth thomas hd 1688


  • Place your Seth Thomas atomic clock face-down on a table or desk and locate a series of buttons labeled "PST," "MST," "CST" and "EST" on the back of the clock. Press the appropriate button to set the time zone.

  • 2

    Turn your attention to the small lithium battery-powered digital clock display on the back of your clock. With the correct time zone set, the digital display should accurately reflect the current local time.

  • 3

    Locate the AA battery compartment on the back of your clock. Put two new AA batteries into your clock's battery compartment.

  • 4

    Set the "Mode" switch on the back of your Seth Thomas atomic clock to "Run." Wait for it to adjust to the correct time. The automatic time-adjustment process can take up to 45 minutes, but is usually completed much sooner.



  • Read more: How to Set a Seth Thomas Atomic Clock ' eHow.com http://www.ehow.com/how_6120534_set-seth-thomas-atomic-clock.html#ixzz1GyAcVHP2 hope this helps you

    Mar 17, 2011 | Seth Thomas Radio Controlled Wall Clock -...

    1 Answer

    How do i set the time on this product


    Press the Clock Set button on the top of the clock radio. Press either the forward or reverse (skip) buttons to change the time. Press and hold the button to get the time to change faster. Make sure the AM/PM indicator is correct for the current time. Then press Clock Set or wait 5 seconds without pressing a key to exit the time set mode.

    You set the alarm time similarly after pressing Wake Time. Make sure the Wake Mode is set to alarm, radio or CD.

    The manual for the clock is available at the RCA site: http://www.rcaaudiovideo.com/search/?km=RP5605 .

    I hope this helps.

    Cindy Wells

    Feb 05, 2011 | RCA RP5605 Clock Radio

    1 Answer

    How do you set the time on Brookstone iDesign Cube Clock Radio?


    Simply HOLD down the "CLOCK SET" button for ~3 secs and the time will flash... Rotate the dial around the SNOOZE button to the hour you want; click the "CLOCK SET" button again for the minutes and rotate the dial again... Hit the "CLOCK SET" button one last time and you're done!

    Jul 05, 2010 | Brookstone (467522) Clock Radio

    1 Answer

    Matsui Radio Alarm CDCR200 set the clock time, lost instructions


    Hold CLOCK SET button down, press HOURS and MINUTES until you get the right time, release CLOCK SET button. This radio alarm unhelpful calls the ON/OFF button "STANDBY"! To turn it on, press the STANDBY button so the standby light is on!

    Feb 21, 2010 | Audio Players & Recorders

    2 Answers

    GPX clock radio clock question


    I emailed the company and they sent a pdf of the manual back the same day.

    partsinfo@dpi-global.com

    Jun 06, 2008 | GPX CRCD6306DT Clock Radio

    3 Answers

    Radio controlled clock won't set


    it sounds like its working but its setting daylight savings time mine has an option to turnoff .that's makes scents if it always 1 hour off exactly.

    Feb 15, 2008 | La Crosse Radio Controlled Atomic Clock

    2 Answers

    Virgin Pulse model VP-07 CD clock radio


    1. To set the clock to leave the unit in standby mode. (Plug in the AC cord to a wall outlet without switching unit on). 2. Press SET button for about five seconds until AM--12:00-- stops flashing. 3. Press down TUNING button to adjust hour, and up TUNING button to adjust minute. 4. Press SET button to confirm time set.

    Sep 11, 2007 | Virgin Pulse VP-07 Clock Radio

    Not finding what you are looking for?
    Visteon HD Pulse HDT200 Satellite Radio Receiver Logo

    Related Topics:

    40 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Visteon Audio Players & Recorders Experts

    kakima

    Level 3 Expert

    102366 Answers

     Grubhead
    Grubhead

    Level 3 Expert

    4853 Answers

    The Knight
    The Knight

    Level 3 Expert

    72640 Answers

    Are you a Visteon Audio Player and Recorder Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...