Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Duet 6hw9150p leaks when i put a full load

When ever i put a small loasd it doesnt leak as soon as i put a full load it leaks do you have any solution of what might of happend

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Is the door seal dirty?
A dirty door seal can cause a leak. Remove and clean any dirt or deposits around the inner door seal with a damp cloth. The door glass seals against the rubber seal; dirt or deposits can prevent a proper seal and cause leaks.

Posted on Dec 20, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When tub is near full it lt leaks off the back top from the fill . also doesnt spin unless i do a reset then put it to spin .


You have an over fill problem-there is a small hose that goes to the level setting control-the hose or the fitting on the tub is clogged cheers Denny

Oct 15, 2013 | GE WHSE5240D Top Load Washer

1 Answer

My washing machine is leaking water from the bottom right side when beening filled, I mean leaking all the water out. I had used it last and washed a small load with a pillow in the load. What could of...


first check the hose connections at the rear of the washer if no leaks than ur problem can be a few different ones their are hose connections and clamps connected to the motor/pump if ur lucky a clamp or hose is damaged-- unlucky problem seal leak or crack in unit

Sep 12, 2011 | Washing Machines

1 Answer

I have a Kenmore heavy duty washing machine model C110. When the machine has a full load and a high water level, it leaks, but when the level is lower ( small load ) it is ok. Also under the machine on the...


The water leak is from the white tub cover on top of the tub. The seal needs replaced.

The oil is from the transmission.

I honestly would replace the washer.

Jan 12, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Leak with heavy load


Is the machne noisy? If not, it may soon become noisy. Sounds as if the grease seal protecting the basket spindle bearings is leaking. soon the bearings will fail

Sep 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Maytag top load washing machine leaking water from bottom


The machine is leaking water from the bottom, I think the leak is in the area near where the motor is mounted. Before we noticed the water comes from underneath the washer, we smelled like burning rubber.

Al Bana

Jun 26, 2009 | Maytag PAV2300 Top Load Washer

2 Answers

Ge front load washer leaks from bottom


full display
And for the part numbers look here


Have fun with it and please rate me on this site

Apr 19, 2008 | GE WSXH208A Front Load Washer

1 Answer

Leaking water


Maybe it leaks from te heating element. Happends often on older Candy machines!

Jan 22, 2008 | Candy AQ130 Front Load Washer

2 Answers

Hoover Steamvac Widepath 6500 leaks


You didn't give your model number, but if this is a V2, you may have a crack in the tank, alot of times it is underneath the seal on the bottom. Or the plunger at the bottom of the tank is stuck open or missing.

Dec 02, 2007 | Hoover F7425-900 SteamVac V2 Widepath...

2 Answers

Washer leaks when running full loads


This could mean the fill level is not working properly and there is an overfill situation. Generally[I don't know 'Roper'] the fill level is controlled by a 'bottle' like device at the fixed to the outside of the drum at the bottom with, with a fine tube leading to a disk like thing near the top of the machine- with wire coming from it to the controller. The 'disk' thing is the pressure sensor. and the bottle thing is supposed to fill with water and the air pressure in the tube actuates the switch in the 'disk' Overtime the 'bottle' will get clogged with crud and need cleaning out. This will mean taking it off and giving it a good cleaning. Hope this helps.

Jul 07, 2007 | Roper RAS8445KQ Top Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

570 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2667 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...